John,
Sorry, I didn't notice if anyone replied or not, so I'll take a stab at
it anyway.
Yes, you can replace the TC gasket by lowering the oil pan. It's a
pain, but can be done. The hard part is getting the pan gasket to seal
properly afterwards.
I've done this successfully; one single time in my life, but might
work, if you don't mind the look. Take some brake cleaner and spray the
TC gasket thoroughly. Try to get all the oil out. Let it dry for a few
minutes. Take your handy-dandy self-reproducing nasty old Ultra-Black
silicon, and fill up the outer edges of the TC where it leaks. Smooth
it over with your finger for that "almost hilllbilly" look. I
successfully sealed up a front seal on the bottom side of a TC like that
once. Fortunately, no one could see the work of art that silicone
provides. But it worked, no more leak! and only took a few minutes
of effort.
However, I've tried a couple of times since then with less success.
There's also some other products similar to silicone that advertise
'instant seal' even with oil present to seal up similar oil leaks. Find
them near the silicone in your local auto parts store.
Good luck,
Mike
--
I would rather live my life as if there is a God, and die to find out there
isn't, Than live my
life as if there isn't, And die to find out there is. -Blaise Pascal
Check out my webpage at http://www.ProStreetCar.com
TREMEC Distributor at http://www.5speedTransmissions.com
Team Chevelle member #1778 (Gold), ACES member #1377
Hoosier State Chevelle Assoc (http://www.IndianaChevelles.com) #6
Johnny Palmer wrote:
Hi guys...Does anyone have any tips on fixing a leak on the timing
cover oil pan gasket on a small block???..Can the oil pan be lowered
enough with the engine in the car to replace it??
John
66 malibu with a leak
------------------------------------------------------------------------
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.17.17/661 - Release Date: 1/30/2007
11:30 PM
