Chuck, Be sure to install your clips before the windshield is in place. I
use Butyl rubber tape. It is available at most good parts stores. Use either
3/8" or 5/16". If you have never done this before get some help. It is hard
to describe the process in an email. Check the team chevelle achieves for WS
installation instructions.
Mike
----- Original Message -----
From: "Chuck Kranz" <[EMAIL PROTECTED]>
To: "The Chevelle Mailing List" <chevelle-list@chevelles.net>
Sent: Wednesday, June 13, 2007 2:10 PM
Subject: [Chevelle-list] Windshield install clips etc.
howardholland wrote:
Its not a problem,just make sure you install new clips to hold down the
trim,if the old ones are bad.
The real fun starts is when you put the trim back on and you have new
paint to deal with..............opps
I scratch my new paint.......................Have at it.
Howard
Where is a good source for clips and installation sealer? (if you call it
that) I believe the clips are placed around the windshield and the sealer
is applied to the body. Then the glass is carefully installed. Anyone do
this often enough to give advice?
Thanks,
Chuck K.
--
No virus found in this incoming message.
Checked by AVG Free Edition. Version: 7.5.472 / Virus Database:
269.8.15/847 - Release Date: 6/12/2007 9:42 PM