Thanks, Jim _____
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Devin Sent: Tuesday, September 11, 2007 1:13 AM To: [EMAIL PROTECTED]; 'The Chevelle Mailing List' Subject: Re: [Chevelle-list] Two Questions Baseline your carb by removing it and checking your idle transfer slots. They should look like rectangles with the throttle blades closed. Set your idle mixture screws about 1.5 turns out from bottomed. Get it warmed up and check your mixture screws. Adjust til you get your highest idle speed or vacuum rating, either one will work. Turn your idle speed screws front and rear an equal amount to get the idle where you want it. Hope this helps. I've spent too much time on the phone with their tech support. Their website also has a good amount of info. Devin _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim Buckingham Sent: Monday, September 10, 2007 9:03 AM To: 'The Chevelle Mailing List' Subject: [Chevelle-list] Two Questions Anyone got good directiosn for adjsut a demon carb?? I see to have lost mine. It is a road demon 650. Anyone have a rad shroud for a small block for sale?? Need the larger one that covers the big radiator. Thanks, Jim Internal Virus Database is out-of-date. Checked by AVG Free Edition. Version: 7.5.484 / Virus Database: 269.13.0 - Release Date: 8/30/2007 12:00 AM Internal Virus Database is out-of-date. Checked by AVG Free Edition. Version: 7.5.484 / Virus Database: 269.13.0 - Release Date: 8/30/2007 12:00 AM
