My first thought would be that you could cut the filler neck with a hacksaw and
use a rubber hose to reinstall it if you can't get the tail pipes out of the
way. Some metal filings will be left in the tank that may be hard to remove
though.
Bob
>
> From: "Trooper" <[EMAIL PROTECTED]>
> Date: 2008/05/19 Mon AM 09:04:21 EDT
> To: "The Chevelle Mailing List" <[email protected]>
> Subject: Re: [Chevelle-list] removing filler neck from gas tank
>
> Steve,
> As has already been said, the filler neck is welded to the tank. Removing
> the tank with the neck attached is you only option. Can you drop the exhaust
> low enough to remove the tank or drop the tank low enough to get to the
> sending unit?
> ----- Original Message -----
> From: [EMAIL PROTECTED]
> To: [email protected]
> Sent: Monday, May 19, 2008 6:09 AM
> Subject: [Chevelle-list] removing filler neck from gas tank
>
>
> Hey guys, I need to eplace the sending unit in my 70 SS and was wondering
> how the filler neck comes off the tank so I can remove the tank. There is no
> rubber connecting piece or any type of clamp holding it on. I put 3" exhaust
> on the car so removing the tank with the filler neck on it as a unit really
> isnt an option. Thanks for helping me out ( AGAIN ) Steve
>
> ------------------------------------------------------------------------------
> Plan your next roadtrip with MapQuest.com: America's #1 Mapping Site.
>
