Eddie thanks for the encouragment. Father son project for this winter, and probly a couple of other seasons too :O) Jimmy C ----- Original Message ----- From: Eddie Bumgarner To: [email protected] ; The Chevelle Mailing List Sent: Friday, June 12, 2009 1:08 AM Subject: Re: [Chevelle-list] convertible A-body
Good to hear that you are doing it right by taking it off the frame. Thats what i did to my convertable. even if you leave the doors on it, it needs to be braced as much as you can to keep it from warping. Good luck and if you need any help please ask. Glad to help. Eddie Bumgarner Eddie Bumgarner 66ss conv. ------------------------------------------------------------------------------ From: Jim H. Thompson <[email protected]> To: The Chevelle Mailing List <[email protected]> Sent: Wednesday, June 10, 2009 7:05:33 PM Subject: Re: [Chevelle-list] convertible A-body I found my 65 Malibu to be completely solid and had the car on a rotisserie without bracing. From: [email protected] [mailto:[email protected]] On Behalf Of Jim & Chris Sent: Wednesday, June 10, 2009 10:58 AM To: [email protected] Subject: [Chevelle-list] convertible A-body Just thowing this out there, I have a 68 convertible cutlass and entertaining the thought of a fram off at some point. the mid/rear part of the drivers side frame needs some attention and has surface rust throughout? do I take the doors off and brace it ? or just gentily raise it and hope for the best. greatful for any suggestions. Jimmy. C
