I ran a Hurst super shifter with Muncie 4 gear in my 69 before I started the
resto. The shifter came right up the factory hole in the floor with no mods
but the shifter handle was too short to use the console.
Trooper
----- Original Message -----
From: "GCP Tech" <[email protected]>
To: "chevelle-list: chevelles.net" <[email protected]>
Sent: Monday, July 27, 2009 2:11 PM
Subject: [Chevelle-list] Location of shifter
I need to make a custom bracket to attach the shifter to the
transmission...
It's a Muncie transmission with a Hurst Competition Plus shifter that is
going into a '68 Chevelle. It's supposed to fit inside the stock console.
I noticed the shifter stick has a 90-degree jog in it, pushing the stick
toward the passenger side... Just wondering where the stick ends up. I'd
like to assume it's centered down the centerline of the transmission. I
have nothing to check it against since the floor is all new.
Does anyone have the same transmission and shifter? With the transmission
in 3rd or 4th gear; how far from the edge of the stick to say, the driver
door panel or center of the steering column?
Kind regards,
Don Hoeschen
Granite City Performance
custom engineered competition components
http://www.granitecityperformance.com/
