I thought the bearing inside the turn signal was a part of the turn signal mech.? Can you get just the bearing? Dan
On Sat, Mar 13, 2010 at 9:26 AM, Larry Williams <[email protected]>wrote: > Thanks. Where did you get the top bearing by the turn signal? > > Larry > > Leonard P Sanders wrote: > >> I have a 66 chevelle SS I am doing same thing. It started making squeaking >> noises.To make long story short,bearing in turn signal >> switch you can get (make sure you get right one there is two)and a lower >> bearing on the outside of firewall close to steering box above rag joint >> The lower bearing is hard to find.I got a new version from NPD (National >> Parts Depot) in Florida thats were i'm at.Thay sent me a bushing instead of >> a bearing.So i call them back,thay were very helpful about the bushing.Thay >> check with there " GM " tech and said that is what you get now. A better >> piece instead of the bearing.So thats what I'm doinig this weekend. >> >> On Fri 12/03/10 9:15 AM , Dan Solomon [email protected] sent: >> >> >>> There are bushings/bearings inside the column but the problem is >>> going to be finding the components. Classic Muscle shows a few >>> components still available but most say "call" or discontinued. Guess >>> its possible that once you have the unit apart, you could match the >>> components to an off the shelf item. Good luck! >>> Dan >>> "It is a mistake to allow any mechanical object to realize you are in >>> a hurry." >>> http://www.freewebs.com/chevelles1970/ [1] >>> >>> >>>> Date: Thu, 11 Mar 2010 17:20:51 -0800 >>>> From: [email protected] >>>> To: [email protected] >>>> Subject: [Chevelle-list] Steering Column Rebuild? >>>> >>>> Is there any way to rebuild a 65 chevelle steering column? There >>>> >>>> >>> must >>> >>>> be bushings inside that wear. My column moves laterally way too >>>> >>>> >>> much. >>> >>>> Larry >>>> >>>> >>> Links: >>> ------ >>> [1] http://www.freewebs.com/chevelles1970/ >>> >>> >>> >>> >> >> >> >> > >
