The dimension is 25 1/2 W X 22 1/2 H. The outlets are center top
tank and passenger side lower tank.
On 11/6/2010 11:41 AM, Brad Waller wrote:
Is the radiator custom? How would I mount it, and would it fit a '67 that
came with a big block originally?
Brad
-----Original Message-----
From: [email protected] [mailto:chevelle-list-
[email protected]] On Behalf Of Larry Williams
Sent: Saturday, November 06, 2010 8:21 AM
To: Chevelle List
Subject: [Chevelle-list] OT: Stuff For Sale
Time to start unloading parts and other things I will never use. This
is big stuff so I don't want to ship. So if you are in central Calif.
and are interested contact me.
Engine stand. commercial quality heavy duty Old. Very good
M-20 Muncie 4 sp. with Hurst linkage Stored>10 yrs in the shop.
goods shape, but needs 2nd gear syncro I had to double clutch to shift
down to 2nd. Shifting up was normal in all gears.
Turbo 400 w/ torque conv. Was in Camaro w/ SB I bought. This was
modified but unsure to what extent. Worked OK stored inside for a few
years. I never drove the car because I couldn't register it due to smog
requirements.
Aluminum bellhousing
Hays flywheel ext bal used 10 sec Tried to run it on my internally
balanced BB
Flywheel stock
65 SS front drums, spindles, and brakes assembled. good shape.
GM electronic dist.
3 row brass Radiator w/o side mounting brackets. Very good
Buick buckets seats driver side electric. ran in 65 SS for a while.
Too high.
BB cast heads complete comp cams springs used with hyd roller good
shape should bolt on and go.
Holly 750 CFM carb
66 SS hub caps full set good
Rear sway bar new.
3.70 ring and pinion used good
4 sp console rough
4 barrel air cleaner oil bath and reg w/ element rough
Auto console and shifter parts rough
4 bbl manifold cast stock low rise
I can take pictures of anything. If you want a small item I may ship.
Larry Williams
Wallace CA 95254
