Hahaha - no problem Jesse In the end I just re-built my production site from scratch with new Linux, new Erlang, new CB, and all this stuff went away.
It was painful, but in the end I suspect less painful than trying to work my way out of the mess I had manged to get into. (I learned something about my recovery procedures too ;-) ) Thanks again, graeme On 20 August 2014 05:12, Jesse Gumm <[email protected]> wrote: > Hi Graeme, > > Sorry for the late response. > > Have a look at the lager configuration > https://github.com/basho/lager#setting-the-truncation-limit-at-compile-time > to change the truncation level so you can actually see the full call that's > failing. > > Otherwise, I don't know, man! > > -Jesse > > > On Sun, Jul 20, 2014 at 3:06 AM, Graeme Defty <[email protected]> > wrote: > >> Hi Jesse, and thanks for the quick response. >> >> When I looked at your link - code i admittedly saw already - it was clear >> (in a way that it was not at 3.00am)that the rebar_plugin module must match >> rebar. I noted in my post the differences in arity, but I had not thought >> to replace rebar_plugin. Once I did so the application both compiled and >> ran :-) >> >> BUT . . . (why is there always a but?) >> >> in production (not in dev) trying to run the application gives: >> >> 07:53:21.136 [error] Error in view egolf_view_club_list_html error undef >> [{erlydtl_runtime,find_value, >> [cred, >> [{"_vars", >> [ {"_before",{cred,id,"fairplayasia.com:8001 >> ",undefined, >> {club,"g4",[],"g4",[],[],[],[],[],[]," >> www.fairplayasia.com",[],[],[],[],[],[]}, >> [{role,"role-29","g4","visitor"}], >> >> ["comp.list","comp.list_rounds","comp.results","comp_entry.list","comp_entry.view", >> >> "entry_player.list","entry_player.view","round.list","round.view"],[],[],[]}}, >> {"_lang","en"}, >> {"_session",[]}, >> etc. etc. etc. >> >> Strangely, going to the command line and using >> erlydtl_runtime:module_info(exports) shows both find_value/2 and >> find_value/3. I am unable to check that one of these is being called >> because the output is truncated, both on the console and in the log (as >> indicated by the etc.s above - I am unable to count the args, but I have no >> reason to believe it is being called incorrectly. >> >> How can I see it on the command line but it is undef when running? >> >> Any thoughts? >> >> g >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> On 20 July 2014 03:35, Jesse Gumm <[email protected]> wrote: >> >>> Hi Graeme, >>> >>> So again, that's a weird error that again looks like an outdated version >>> of rebar. That it's breaking on this line >>> https://github.com/ChicagoBoss/ChicagoBoss/blob/master/skel/priv/rebar/boss_plugin.erl#L31 >>> >>> Does dev mode run on your production server? >>> >>> -Jesse >>> >>> >>> >>> >>> On Sat, Jul 19, 2014 at 2:15 PM, Graeme Defty <[email protected]> >>> wrote: >>> >>>> Sorry, I should not have assumed everyone was following my mini-saga in >>>> detail :-) >>>> >>>> I am using : >>>> >>>> - Ubuntu 14.04 >>>> - Erlang R17 >>>> - CB 8.13 >>>> >>>> Thanks, >>>> >>>> g >>>> >>>> >>>> >>>> >>>> >>>> On 20 July 2014 02:12, Graeme Defty <[email protected]> wrote: >>>> >>>>> Well having got things working in my development environments I have >>>>> now pushed all changes to the server. >>>>> >>>>> I also put in all the patches to boss_db, erlydtl etc that made things >>>>> work... >>>>> >>>>> BUT (and you knew this was not going to be a happy ending, right?) >>>>> >>>>> ... when I try to start the server I get the following: >>>>> >>>>> >>>>> graeme@li184-248:~/egolf-uat$ sudo ./init.sh start >>>>> [sudo] password for graeme: >>>>> starting boss in production mode... >>>>> ERROR: boss failed while processing /home/graeme/egolf-uat: >>>>> {'EXIT',{undef,[{rebar_config,get_global,[c,"help"],[]}, >>>>> {boss_plugin,boss,2, >>>>> >>>>> [{file,"priv/rebar/boss_plugin.erl"},{line,31}]}, >>>>> {rebar_core,run_modules,4, >>>>> [{file,"src/rebar_core.erl"},{line,446}]}, >>>>> {rebar_core,execute,5, >>>>> [{file,"src/rebar_core.erl"},{line,371}]}, >>>>> {rebar_core,process_dir1,6, >>>>> [{file,"src/rebar_core.erl"},{line,235}]}, >>>>> {rebar_core,process_commands,2, >>>>> [{file,"src/rebar_core.erl"},{line,90}]}, >>>>> {rebar,main,1,[{file,"src/rebar.erl"},{line,58}]}, >>>>> {escript,run,2,[{file,"escript.erl"},{line,752}]}]}} >>>>> graeme@li184-248:~/egolf-uat$ >>>>> >>>>> >>>>> Any clues? >>>>> >>>>> A workaround would do - my prod server is down. :-( >>>>> >>>>> g >>>>> >>>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "ChicagoBoss" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> Visit this group at http://groups.google.com/group/chicagoboss. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/chicagoboss/CAKF5fiB073Xa1qnr8RbnxH4YZepi4Dh-gGa-JQbfE62cqj8Hqg%40mail.gmail.com >>>> <https://groups.google.com/d/msgid/chicagoboss/CAKF5fiB073Xa1qnr8RbnxH4YZepi4Dh-gGa-JQbfE62cqj8Hqg%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> >>> >>> -- >>> Jesse Gumm >>> Owner, Sigma Star Systems >>> 414.940.4866 || sigma-star.com || @jessegumm >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "ChicagoBoss" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> Visit this group at http://groups.google.com/group/chicagoboss. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/chicagoboss/CAPTXyXcXA5JFG-h1%2B2YjUuoJa-ccb3f3MKDZaAF9vLT2ggEgew%40mail.gmail.com >>> <https://groups.google.com/d/msgid/chicagoboss/CAPTXyXcXA5JFG-h1%2B2YjUuoJa-ccb3f3MKDZaAF9vLT2ggEgew%40mail.gmail.com?utm_medium=email&utm_source=footer> >>> . >>> >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "ChicagoBoss" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> Visit this group at http://groups.google.com/group/chicagoboss. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/chicagoboss/CAKF5fiCCynLX96W_L1wG9YnYUdROcMO9h97mVTZQ9ZezWGAkuQ%40mail.gmail.com >> <https://groups.google.com/d/msgid/chicagoboss/CAKF5fiCCynLX96W_L1wG9YnYUdROcMO9h97mVTZQ9ZezWGAkuQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > Jesse Gumm > Owner, Sigma Star Systems > 414.940.4866 || sigma-star.com || @jessegumm > > -- > You received this message because you are subscribed to the Google Groups > "ChicagoBoss" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > Visit this group at http://groups.google.com/group/chicagoboss. > To view this discussion on the web visit > https://groups.google.com/d/msgid/chicagoboss/CAPTXyXf5wNChzDHDyAnXdbZB6w5%3D5Qj-dwZ%2BSmH%2BS64A8hZssQ%40mail.gmail.com > <https://groups.google.com/d/msgid/chicagoboss/CAPTXyXf5wNChzDHDyAnXdbZB6w5%3D5Qj-dwZ%2BSmH%2BS64A8hZssQ%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ChicagoBoss" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at http://groups.google.com/group/chicagoboss. To view this discussion on the web visit https://groups.google.com/d/msgid/chicagoboss/CAKF5fiD6R8J8RGa5O%3DWrKDVvgjpkrccDVTq2SDvNQE8M%2B-Z%2BnQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
