Dear sirs I'm try to program a plc but with no success.The procedure I'm using is the following: 1.Running a .bat file which set up the rs232 to specific speed and data level and then send to com port an ASCII file 2.This file must be store temporally to the RAM of the plc but unfortunately the ram does not seam to have valid data after step 1 3 The contents of the Ram must then be transfer via plc menus to the EEPROM of the plc .
My questions are ,does anybody advice the pin connections for the rs232 cable .Also I wondering if I can use a programmer to program directly the EEPROM and in this case what format to use in order to open the file (I.e. ASCII or binary) Thanks in advance Constantia -- Author: ak INET: [EMAIL PROTECTED] Fat City Network Services -- (858) 538-5051 FAX: (858) 538-5051 San Diego, California -- Public Internet access / Mailing Lists -------------------------------------------------------------------- To REMOVE yourself from this mailing list, send an E-Mail message to: [EMAIL PROTECTED] (note EXACT spelling of 'ListGuru') and in the message BODY, include a line containing: UNSUB CHIPDIR-L (or the name of mailing list you want to be removed from). You may also send the HELP command for other information (like subscribing).
