Thanks for the pinout!  I receievd the image from a co-worker in Germany who 
had kept the disk around (gotta love pack rats).  I still had to make the 
disk from his disk (his would not boot), but the driver for the 35MHz/100MHz 
card was on the disk.  That was all I needed.  Every thing appears to be 
working great.  btw, the pinout you gave confirms my metering of the pod.
Thanks again.
Bob

On Friday 30 August 2002 01:08, da Silva, Joe wrote:
> I presume you mean for the HP16500A?
>
> Well, if it's the same as a HP1650B, then it's as follows :
>
> 1 = NC (+5)
> 2 = NC (PWR GND)
> 3 = CLK
> 4, 6, 8 ... 36, 38 = SIG GND
> 5 = NC
> 7 = D15
> 9 = D14
> .......
> 35 = D1
> 37 = D0
> 39 = NC (+5)
> 40 = NC (PWR GND)
>
> AFAIK, the pod assembly is where some sort of RC compensation
> network exists, in the two-pin probes that are within the pod assembly.
> According to a diagram, this RC network consists of two resistors
> in series, with a capacitor in parallel to the second resistor (the side
> going to the LA).
>
> Hope that helps, and BTW, what was the URL where you found the
> disk images for your LA?
>
> Joe.
>
> > -----Original Message-----
> > From:       Robert Warner [SMTP:[EMAIL PROTECTED]]
> > Sent:       Friday, August 30, 2002 9:48 AM
> > To: Multiple recipients of list CHIPDIR-L
> > Subject:    HP Logic analyzer probes ... ?
> >
> > Hi,
> >
> > Does anyone know the pinout for the 40 pin connector?  And, does anyone
> > know
> > if there is any 'electronics' in the probe assembly?
> >
> > Thanks
> > Bob
> > --
> > Author: Robert Warner
> >   INET: [EMAIL PROTECTED]
> >
> > Fat City Network Services    -- (858) 538-5051  FAX: (858) 538-5051
> > San Diego, California        -- Public Internet access / Mailing Lists
> > --------------------------------------------------------------------
> > To REMOVE yourself from this mailing list, send an E-Mail message
> > to: [EMAIL PROTECTED] (note EXACT spelling of 'ListGuru') and in
> > the message BODY, include a line containing: UNSUB CHIPDIR-L
> > (or the name of mailing list you want to be removed from).  You may
> > also send the HELP command for other information (like subscribing).
--
Author: Robert Warner
  INET: [EMAIL PROTECTED]

Fat City Network Services    -- (858) 538-5051  FAX: (858) 538-5051
San Diego, California        -- Public Internet access / Mailing Lists
--------------------------------------------------------------------
To REMOVE yourself from this mailing list, send an E-Mail message
to: [EMAIL PROTECTED] (note EXACT spelling of 'ListGuru') and in
the message BODY, include a line containing: UNSUB CHIPDIR-L
(or the name of mailing list you want to be removed from).  You may
also send the HELP command for other information (like subscribing).

Reply via email to