> Hi LIST, > > Can you recommend a circuit that can be put between a > M63001FP Motor Drive IC (which putting out only > 2.5VDC)and a small DC motor rated 6VDC. What I need is > a circuit that can step up the 2.5VDC output of Motor > Drive IC to about 6VDC without modifying the Motor > drive Circuit. The M63001FP is a 6 channel motor driver. Do you want to replace one of the 6 motors? Drvers 1 - 3 all have Vcc1, but the other drivers each have their own Vcc. So, separate the Vcc-pin, belonging to the driver under concern, from the print and connect it to 7V. The chip can handle this voltage. At Vcc=5V the output is 4V, so 7V seems to be the right Vcc.
> > Included is an UUENCODED picture of the diagram in BMP > Format to explain further. Very smart done! It works fine and circumvenbts the impossiblity to send attachments to the list. I would like a detailed "how to" of it. -- Author: H.C. Croon INET: [EMAIL PROTECTED] Fat City Network Services -- 858-538-5051 http://www.fatcity.com San Diego, California -- Mailing list and web hosting services --------------------------------------------------------------------- To REMOVE yourself from this mailing list, send an E-Mail message to: [EMAIL PROTECTED] (note EXACT spelling of 'ListGuru') and in the message BODY, include a line containing: UNSUB CHIPDIR-L (or the name of mailing list you want to be removed from). You may also send the HELP command for other information (like subscribing).
