I read that these cables had the real chip, and BlueMax49ers said so
too. But I'll try the rollback and see.
On 2/25/2019 3:57 AM, Jardy via chirp_users wrote:
Try rolling back your cable driver to 3.2.0.0 and see if that works.
Also make sure to push the cable firmly into the radio. Check
www.miklor.com <http://www.miklor.com> for more info.
Jardy Dawson WA7JRD
Message sent through sub space hailing frequencies using the Universal
Translator.
On Feb 24, 2019, at 18:00, Steve Thomas <[email protected]
<mailto:[email protected]>> wrote:
I am trying to program my Kenwood TM281 for the first time. I'm using
Windows 10. I previously ran Chirp to program a Wouxon hand held and
it worked fine with that cable.
I have a Prolific cable I got from BlueMax49ers. The instructions
said it was a genuine Prolific chip and to use the latest drivers.
So I checked and it is using the latest drivers (3.8.28.0). When I
started Chirp, I plugged in the radio, and selected "Download from
Radio". It gave me a dialog with Com3 preselected, and I selected
Kenwood and TM281. When I clicked OK in the dialog, I get this message:
_*An ERROR Has Occurred*__*
*__*could not open port COM4: [Error 5] Access is denied.*_
I tried Com3, and got the same error.
_*An ERROR Has Occurred*__*
*__*could not open port COM3: [Error2] The System Cannot find The
File specified.*_
(this may be the original error, I don't know. I changed the com port
to Com4 before writing down what the original error was when it
originally went to Com3)
I looked into Device Manager, and under Ports (Com and LPT) It says
the Prolific USB to Serial Comm Port (Com4)
I looked at the Properties and it says this:
<mdljdajnfmhnophb.png>
Does this sound familiar?
Steve
_______________________________________________
chirp_users mailing list
[email protected]
<mailto:[email protected]>
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jardy at [email protected]
<mailto:[email protected]>
To unsubscribe, send an email to
[email protected]
<mailto:[email protected]>
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Steve Thomas at [email protected]
To unsubscribe, send an email to [email protected]
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
