On Thu, Mar 7, 2019 at 1:49 AM Gary Fara <[email protected]> wrote: > > Hello - please help, > > I try to use CHIRP to program a new Baofeng BF-F8HP and I receive this > warning: > "This radio's driver is experimental. Do you want to proceed?" > "Due to the fact that the manufacturer continues to release new versions of > the firmware with obscure and hard-to-track changes, this driver may not work > with your device. Thus far and to the best knowledge of the author, no UV-5R > radios have been harmed by using CHIRP. However, proceed at your own risk!" > > I am using this cable: > BTECH PC03 FTDI Genuine USB Programming Cable > https://www.amazon.com/gp/product/B00HUB0ONK/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1 > I am programming this radio: > BaoFeng BF-F8HP (UV-5R 3rd Gen) 8-Watt Dual Band Two-Way Radio (136-174Mhz > VHF & 400-520Mhz UHF) > https://www.amazon.com/gp/product/B00MAULSOK/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1 > > I've used CHIRP before to program 4 UV5R radios with a different cable. > > What is wrong?
Nothing. > How can I use CHIRP? When you see the message, click [Yes]. If you don't want to see the message again, tick the "Do not show this next time" box before clicking [Yes]. > > Thank you, > Gary Jim KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
