Hi Chip, "/dev/cu.usbserial-RT3P07W9" is definitely the right device. Your error came from the python internals (and the pyserial library), and is more about code working badly, less about the cable or having the wrong device. Are you using CHIRP nightly or an older build?
If you are using nightly, then it's likely one of two problems: - You have put a file called "serial.py" in your home directory (uncommon but possible) - You have the wrong python serial library installed Have you ever run "pip" to install a serial library? You can try these commands and see if it fixes things: sudo python -m pip uninstall serial sudo python -m pip install pyserial I think the kk7ds runtime includes pyserial, but I don't have the package in front of me to check. Try those commands and be sure you are running nightly, and see if things go better. -- Brian AF7MD On Tue, Jun 11, 2019 at 4:58 PM Jim Unroe <[email protected]> wrote: > Nothing that says "Bluetooth" would be the correct choice. > > On Tue, Jun 11, 2019, 7:27 PM Chip Griffin via chirp_users < > [email protected]> wrote: > >> I’m getting an "AttributeError: 'Serial' object has no attribute >> ‘get_payload’” error when I try to read from my Icom IC-80AD. It’s >> instantaneous to when I start. I’ve looked at drivers and can’t find the >> alleged Apple FTDI driver. When I look in the directory IOUSBFamily.ktext I >> only see the following options: >> >> AppleLegacyUSBAudio.kext/ IOUSBCompositeDriver.kext/ >> IOUSBHIDDriverSafeBoot.kext/ >> AppleUSBLegacyHub.kext/ IOUSBHIDDriver.kext/ >> IOUSBLib.bundle/ >> AppleUSBMergeNub.kext/ IOUSBHIDDriverPM.kext/ >> IOUSBUserClient.kext/ >> >> When I do a $ ls /dev/cu* I see: >> /dev/cu.Bluetooth-Incoming-Port /dev/cu.usbserial-RT3P07W9 >> >> I’ve tried both. Bluetooth doesn’t even come close to happiness and the >> RT3P07W9 one gives me the above error. >> >> I do have the KK7DS stuff installed, even tried installing it a second >> time to be sure. >> >> >> I also tried on my Vista machine with even more pathetic results. >> >> >> -- >> Chip >> >> _______________________________________________ >> chirp_users mailing list >> [email protected] >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Jim at [email protected] >> To unsubscribe, send an email to >> [email protected] > > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Brian Dickman at [email protected] > To unsubscribe, send an email to > [email protected]
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
