if i recall correctly, in the duplex colum, select off. that stops tx. 73's
----- Original Message ----- From: "Adam Nielsen" <[email protected]> To: <[email protected]> Sent: Tuesday, July 09, 2019 3:42 PM Subject: [chirp_users] Error setting memory - out of supported range[Baofeng] > Hi all, > > I'm new to Chirp and testing it with a Baofeng F8+III (supposedly an > update on the UV-5R). I have successfully downloaded all the > programmed frequencies (as both BF-F8HP and UV-5R models). I named > some of the channels and uploaded them, and now the radio shows the > names I entered instead of the frequencies - great! > > However I am unable to name some of the channels as I get an error > when I attempt to do so: > > Error setting memory: Tx freq 0.000500 is out of supported range > > When I programmed in this frequency, I wanted to disable transmission > so that I didn't accidentally transmit by mistake. I found some > instructions online that suggested setting the split such that the > transmission frequency ends up in a band that the radio cannot transmit > on, and this indeed works - should I try to transmit the radio beeps > with an error (if beeps are enabled) and no transmission occurs. > > I have now successfully downloaded all my programmed channels into > Chirp, including those with invalid splits, and I can upload them back > to the device as well, with the invalid splits being left unchanged. > However it won't let me assign names to the channels having these out > of range splits because the above error comes up. > > Is there any way I can tell Chirp that this isn't an error, and the > frequency is intentionally out of range to prevent accidental > transmission, and to accept the name of the channel I am trying to set? > > Many thanks, > Adam. > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to m1cfk at [email protected] > To unsubscribe, send an email to > [email protected] > _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
