Hi Patricia,
Perhaps it's the terminology you are using.
Download is from Chirp to the radio, and Upload is to Chirp.
You will first download to the radio, set up the database, and upload to the
radio.
HTH.
Glenn
From: Patricia Wilson
Sent: Thursday, July 11, 2019 7:48 PM
To: [email protected]
Subject: [chirp_users] jetstream jt270m on win10
I cannot figure out how to get my radio to download to chirp. I have CHIRP
daily-20190703 installed and the usb cable going to the mic input on the radio.
I suspect that win10 doesn't like whatever chip there is in the cable but would
appreciate suggestions to try before I get another cable (from the known good
list).
--
Patricia Wilson
Apache Junction, AZ
Member NRA, ARRL
WB8DXX (Extra)
--------------------------------------------------------------------------------
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at [email protected]
To unsubscribe, send an email to [email protected]
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
