Thanks Jim/KC9HI... the Radioddity UV-5RX3 did the job. Works great. Thanks again. 73 NT4K JC
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jim Unroe Sent: Saturday, August 17, 2019 8:11 PM To: Discussion of CHIRP Subject: Re: [chirp_users] UV-5RIII Programming issue On Sat, Aug 17, 2019 at 8:11 PM NT4K JC <[email protected]> wrote: > > New to this list and having a problem programming my UV-5RIII - Tri-band > BaoFeng, 2m/1.25cm/70cm. > > > > I downloaded the latest version of Chirp and did a download from the radio > for a template. When entering a 1.25cm frequency I receive a pop-up� (Error > setting memory: Frequency 224.820000 is out of supported range, Tx freq > 223.220000 is out of supported range.) > > > > > > The radio had a few 220MHz frequencies preprogrammed in memory. Chirp will > not let me change one of them to my desired frequencies. When using a new, > default template I receive the same error. > > > > I�ve tried importing the desired frequencies from a .csv file to an .img file > and get the same error. > > > > It�s possible Chirp is not recognizing the radio. The UV-5RIII is not listed > as a UV5R variant. Although, the Chirp software settings downloaded from the > radio indicate the �VHF Lower limit: 136Mhz� and the �VHF Upper limit: 260MHz� > > > > Never had an issue with other UV-5R or the UV-82X > > > > Any help is appreciated. > > > > Thanks > > 73 NT4K JC > > Pluto 1930 - 2006. Orbit in Peace, If your radio truly does support 3 bands, you are choosing the wrong radio Vendor/Model. You should be choosing Radioddity/UV-5RX3 to get the added support for the 1.25 meter band. Jim KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to JC McCormick at [email protected] To unsubscribe, send an email to [email protected] _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
