Thank You
I wish there were more You Tube videos on the UV 3X50. I was hoping that
HamRadioConcepts would do an in depth review of this unit. He does a
nice job, maybe BTech could contact him and offer him a UV-3X50 to check
out. He has a huge following, could be good for the brand with the more
conservative Hams out there.
Walter
On 11/12/2019 6:09 PM, Jardy via chirp_users wrote:
To see the frequency off the channel memory you are on, you need to go
into the menu and choose from display name, display channel number, or
display frequency. I do not know what menu number it is. A and B have
different menu numbers to change the settings.
Jardy Dawson WA7JRD
Message sent from some electronic device that only the Manufacturer of
said device really cares about.
On Nov 12, 2019, at 14:30, Dennis Wage <[email protected]> wrote:
The UV-5R only has one memory bank. It fools many people.
A/B in memory mode only switches between A and B selections of the
same memory bank.
In frequency mode nothing is part of memory, it's just vfo and the
settings in the menu.
I didn't explain this very good, but I am in a hurry. LOL
Dennis M. Wage (W9BOQ)
245 Corum Hill Road
Castalian Springs, TN 37031
(615) 310-4242 Cell
(615) 562-5128 Home
http://hammondb3organ.net <http://hammondb3organ.net/>
http://overdubs.net
On Tue, Nov 12, 2019 at 2:56 PM Jay Stevens <[email protected]
<mailto:[email protected]>> wrote:
I have attached a snap shot of my programming.
When I am in Channel mode I see the Name just fine and the radio
hits and receives the repeater ok. But if I switch to Freq mode,
the screen shows 146.100 no matter what channel I am on. I have
never programmed that freq into the radio.
What am I missing here? Why won't the radio show me the freq of
the Channel I am on?
--
James (Jay) M. Stevens
150 Pinewood Rd.
Poplarville, MS 39470
(601) 795-6221
_______________________________________________
chirp_users mailing list
[email protected]
<mailto:[email protected]>
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Dennis Wage at [email protected]
<mailto:[email protected]>
To unsubscribe, send an email to
[email protected]
<mailto:[email protected]>
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jardy at [email protected]
To unsubscribe, send an email to
[email protected]
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Walter Eason at [email protected]
To unsubscribe, send an email to [email protected]
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
