First you need to clear the channel from whats still on it from
last setting . .
To Set A Baofeng memory Channel
Press ( menu ) Then pick Item 28 .
( Delete Memory Channel ) Then press Menu Again ,
Make sure The Display Is on the Number of the channel
You want to replace ,
If it is not , use the arrows to make it be .
on the display .
Then again press the menu button and voice will say ( Confirm )
Then press the ( EXIt ) Button .
Now Switch To Frequency Mode .
Put the frequency you want to set into the top Display by entering
Its Numbers on the key pad .
Make sure all desired settings have been put on the ( Menu ) Then
press menu and select ( Memory Channel ) Item 27
Press menu Press the numbers of the channel you want to set .
For channel one you need to press zero zero one .
While this is still on The display Press the Menu button Again
the voice Say ( Receive Frequency )
Press The Menu button again and The voice will say (Transmit
Frequency ) Press Menu Again Voice says Memory Channel Press
Exit Button Press
The ( Exit ) Button To Confirm Setting .
Now go back to channel Mode And see if your new setting has Been
placed into the memory by pressing the up or down arrows . .
If its there go back to frequency mode and set the Menu Items back
to what you will need for other channels .
so you can make different settings for each memory and the new
Frequency will be on the desired channel Channel numbers .
Accordingly
( Note ) - Any settings left on menu must be set separately for
each memory channel Unless running a new chirp designator Map .
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
