Hi, try this:
adduser $USER dialout
HTH.
Glenn
----- Original Message -----
From: holmzieN2EXG via chirp_users
To: [email protected]
Sent: Wednesday, February 26, 2020 4:09 PM
Subject: Re: [chirp_users] Having troubles
Still learning how to reply to reply: sorry about duplicates! OK, Jim, I
tried 'em all, (duh) but the /dev/ttyUSB0 makes the most sense. Now logged in
as superuser holmzie#. Gotta go to Harbor Fright to return a sander, be bk in
an hour. Guess I need the proper syntax for the dialout command thing.
THANKS FOLKS!!
holmzie N2EXG
-----Original Message-----
From: Jim Unroe <[email protected]>
To: holmziep <[email protected]>; Discussion of CHIRP
<[email protected]>
Sent: Wed, Feb 26, 2020 3:52 pm
Subject: Re: [chirp_users] Having troubles
On Wed, Feb 26, 2020 at 3:22 PM holmzieN2EXG via chirp_users
<[email protected]> wrote:
>
> Have the Yaesu 857 w/ oem serial cable, then a good FTDI Serial/usb
adapter. Running Linux Mint 19.3.
>
> Got the dreaded error [Errno 13] could not open port /dev/ttyS0: [Errno 13]
Permission denied: '/dev/ttyS0'
>
> Searched long and hard, Done everything, Dan and others say to do,
carefully, no luck. Here's some commands and results:
>
> Pete, N2EXG
Hi Pete,
You are choosing the wrong port. Assuming that your user has been
added to the 'dialout' group, scroll all the way down and choose
"/dev/ttyUSB0".
Jim KC9HI
------------------------------------------------------------------------------
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at [email protected]
To unsubscribe, send an email to
[email protected]
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
