It is a problem with the radio itself. Has nothing at all to do with
Windows, Linux, or Chirp.
Tom Henderson
On 3/7/20 12:53 PM, Amnon Zohar wrote:
So it is not limited to linux but to windows as well!?
בתאריך שבת, 7 במרץ 2020, 19:22, מאת Terry Hunt
<[email protected] <mailto:[email protected]>>:
Thanks Jim, that would make since. I appreciate the reply and
confirmation.
Terry
------------------------------------------------------------------------
*From:* [email protected]
<mailto:[email protected]>
<[email protected]
<mailto:[email protected]>> on behalf of
Jim Unroe <[email protected] <mailto:[email protected]>>
*Sent:* Saturday, March 7, 2020 10:32 AM
*To:* Discussion of CHIRP <[email protected]
<mailto:[email protected]>>
*Subject:* Re: [chirp_users] QYT-KT8900D
On Sat, Mar 7, 2020 at 9:14 AM Terry Hunt <[email protected]
<mailto:[email protected]>> wrote:
>
> I have several radios that I program using CHIRP, running Linux
the manufacture software isn't usually compatible., so thank you
to everyone that works so hard to make CHIRP a success. I have an
8900D that seems to program perfectly with one exception. This
radio has four monitor slots on the front panel. When
programming, the first two work great, number 3 and 4 however do
not. Some settings like choosing the channel or frequency mode do
work, but setting a default channel on them do not, they always
come up to channel 0 after the restart. Does anyone else have
this issue?
>
> Thanks,
> Terry
Hi Terry,
This is a bug in the hardware that has been present since the first
units began shipping in 2017.
Jim KC9HI
_______________________________________________
chirp_users mailing list
[email protected]
<mailto:[email protected]>
https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fintrepid.danplanet.com%2Fmailman%2Flistinfo%2Fchirp_users&data=02%7C01%7C%7C397a2a549e414369b14308d7c2aced1f%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637191920273250313&sdata=TRsyr%2F1fJcVsyO0EAYRzlgYsFBblA4%2F8IVv9lb7oV5Q%3D&reserved=0
This message was sent to Terry at [email protected]
<mailto:[email protected]>
To unsubscribe, send an email to
[email protected]
<mailto:[email protected]>
_______________________________________________
chirp_users mailing list
[email protected]
<mailto:[email protected]>
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to amnon at [email protected]
<mailto:[email protected]>
To unsubscribe, send an email to
[email protected]
<mailto:[email protected]>
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Tom KM4UQB at [email protected]
To unsubscribe, send an email to [email protected]
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
