Byron, I ended up purchasing the DB25 instead of the quad band (QB25) radio. In the setup for programming using Chirp I had to use the QTY brand and selecting the 7200D or 7800D. I can't remember correctly and I'm not at my computer to tell you for sure but I think one of those was the model number. I haven't used the supplied software but I am going to try it tonight and look at the differences.
I hope this helps. Please post your route of success if you would. 73' and best if luck. Rick W7NGS On Fri, Jun 19, 2020, 10:22 AM Byron Boggs <kc...@hotmail.com> wrote: > I purchased the QB25 with hopes of installing it in my pickup truck. I > have two programming cables for it, the one that came with the radio and an > FTDI cable that I purchased recently. > My problem us error messages. Depending on the port configuration, I get > an error message that states it failed to identify the radio, OR the it > failed to enter the clone mode. I have tried other variants of this radio > like the QTY7900. I have tried Windows 10 and an old laptop with Windows > XP. Same error message on either operating system. Searching through > requests I see others have experienced the same issue. I have clicked on > the post for that issue but it doesn't do anything and I am at a loss as to > what I need to do. I have used Chirp to program the little UV5R units > without issue. > Suggestions will be greatly appreciated > > Byron > Kc8ue > > > > Sent from Byron Boggs > kc...@hotmail.com > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to KD6GJS at richard.coope...@gmail.com > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
