I programmed the KG-UV2d to operate in the 155 and 460 range. When I key the PPT I get a tone but the transmit light does not come on.
It does transmit on the VFO frequencies. I did a reset and re programmed, no change. Any suggestions? Richard K. Parrish, NREMT-P, PC Course Administrator, Woodstock FD, Com 5 35 Park Drive Woodstock, NY 12498 845-679-6504 [email protected] From: [email protected] [mailto:[email protected]] On Behalf Of Rebecca Williams Sent: Thursday, June 18, 2020 3:11 PM To: Discussion of CHIRP Subject: Re: [chirp_users] Retevis 22 programming question Thank you David, Nigel, and Tony! David - your write up was thorough. I have been reading the FAQs and Beginner's Guide before my post, but I will check again and I will dissect your notes as well. Nigel - That is a great question, as I do know that we have a license, but I don't know the answer. We bought the VX261s from a dealer, but they are unable to program the smaller radios for us since they were not purchased through them. I will look into the license conditions. Thank you for bringing it to my attention. The error message I am receiving when I go to upload the frequencies to a new R22 is: image.png Any known reason this would happen? Deeply appreciate the knowledge share, Becky On Thu, Jun 18, 2020 at 12:18 PM Nigel A. Gunn G8IFF/W8IFF <[email protected]> wrote: On 18 June 2020 at 12:01 Tony Fuller <[email protected]> wrote: @Nigel, She may not be using the radios at all. She stated that she is only programming the devices. OK. Under which license will the radios be used? If commercial, the dealer selling the radios would be expected to program them. In any case, she, as an amateur programmer, needs to understand the license conditions under which they will be used. @Becky, can you help us by giving the exact error message(s) you received when programming your Retevis radios? Tony _____ From: [email protected] <[email protected]> on behalf of Nigel A. Gunn G8IFF/W8IFF <[email protected]> Sent: Thursday, June 18, 2020 10:56:07 AM To: Discussion of CHIRP <[email protected]> Subject: Re: [chirp_users] Retevis 22 programming question Under which license will you be using the radios? On 18 June 2020 at 10:44 Rebecca Williams <[email protected]> wrote: Hi ! I am an amateur radio programmer (meaning I have been nominated by my office to program 30 radios). I have 10 Retevis 22s who have successfully downloaded the frequencies from a VX261. I have another 10 Retevis 22s that will come back as some sort of program. Any idea what is making it do that when I go to clone the frequencies? THANKS! Becky _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at [email protected] To unsubscribe, send an email to [email protected] Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] www http://www.ngunn.net _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at [email protected] To unsubscribe, send an email to [email protected] Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] www http://www.ngunn.net _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rebecca Williams at [email protected] To unsubscribe, send an email to [email protected]
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
