Hi All,
Hoping someone here will be able to help.
Ubuntu 16.43, and I'm trying to import a CSV file that I have used on my
Baofengs, onto a new radio.
It is a Wouxun KG UV 7D.
I selected the 6D in the radio list in the Chirp radio selection, since when
looking for the manual at the Wouxun site, I contacted them looking for the
manual and they suggested I use the 6D manual, because the only difference is
the power.
So the 6D selection should work in Chirp, it would seem.
My radio is the 2 & 6 meter model.
One thing it says is that I have an error on line 74, and I looked at that with
Libra Office and couldn't find any problem.
But it leaves out a local repeater channel that normally goes right into a
Baofeng with Chirp, and it also left out the 6 meter channels I put in.
The channel numbers are there, but no values in the fields.
If anyone has any ideas, or can look over my CSV file, I would much appreciate
it.
Thanks.
Glenn
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
