Thanks Gary, I managed to figure out what to do and I’m on my way...Thanks again for the FAST response!! ;} Regards
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 From: Gary A. Cox<mailto:[email protected]> Sent: July 24, 2020 10:22 PM To: Discussion of CHIRP<mailto:[email protected]> Subject: Re: [chirp_users] Abbree AR-F3 Well, good and bad news. I have the CH340 USB Type cable and If I pull the plug on the cable I get the exact message as if I was trying to download with the radio on and plugged in. I have a disk from badfeng it came with the cable and the diver is recognized by windows 10 but does not work. We’re do I find the old driver to install? Gary A Cox Sent from my iPhone > On Jul 24, 2020, at 11:59 AM, Jim Unroe <[email protected]> wrote: > > On Fri, Jul 24, 2020 at 2:46 PM Gary A. Cox <[email protected]> wrote: >> >> No, it’s a new baufang factory cable. But that doesn’t mean any thing. >> I tried a generic cable and it gave a no response error. >> >> Gary A Cox >> Sent from my iPhone >> > > I'll be if you don't even attach the programming cable to the radio > you get the same error. It is a programming cable problem and once you > get it solved, the UV-82III selection will work. > > Are you running Windows? If it has a Prolific type USB-to-Serial chip, > have you downloaded, installed and selected the older v3.2.0.0 device > driver? If it is a WCH CH340/CH341 chip, have you downloaded and > installed the WCH driver? > > Jim KC9HI > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Gary at [email protected] > To unsubscribe, send an email to > [email protected] _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to METTLE at [email protected] To unsubscribe, send an email to [email protected]
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
