Do you ever think they will fix them to download radio reference ? ------ Original Message ------ From: [email protected] To: [email protected] Sent: 8/24/2020 2:00:02 PM Subject: chirp_users Digest, Vol 140, Issue 10
>Send chirp_users mailing list submissions to >[email protected] > >To subscribe or unsubscribe via the World Wide Web, visit >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >or, via email, send a message with subject or body 'help' to >[email protected] > >You can reach the person managing the list at >[email protected] > >When replying, please edit your Subject line so it is more specific >than "Re: Contents of chirp_users digest..." > > >Today's Topics: > > 1. Re: transferring channels from one radio manuf.to another > (Michael Rathbun) > 2. Re: transferring channels from one radio manuf.to another > ([email protected]) > 3. ICOM 5100 (Tim Fitch) > 4. Re: Chirp and BaoFeng UV 5R not communicating (Brian Erickson) > 5. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke) > 6. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke) > 7. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke) > 8. Re: Chirp and BaoFeng UV 5R not communicating (Don Goodrich) > 9. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke) > 10. Re: Chirp and BaoFeng UV 5R not communicating > (Nigel A. Gunn G8IFF/W8IFF) > 11. Re: Chirp and BaoFeng UV 5R not communicating (Silverfox) > 12. Re: ICOM 5100 (Chuck Hast) > 13. Re: ICOM 5100 (Jean C. Velez) > 14. Re: ICOM 5100 (Chuck Hast) > 15. Baofeng UV-9r plus cable issues (Jeremiah Williams) > 16. Re: Baofeng UV-9r plus cable issues (Jardy) > 17. Re: Baofeng UV-9r plus cable issues (W Paul Mills) > 18. Re: Baofeng UV-9r plus cable issues (Jim Unroe) > 19. Re: transferring channels from one radio manuf.to another > (Jim Unroe) > 20. Re: Baofeng UV-9r plus cable issues (richard ward) > 21. Re: Baofeng UV-9r plus cable issues (Jeremiah Williams) > 22. Re: Baofeng UV-9r plus cable issues (John La) > > >---------------------------------------------------------------------- > >Message: 1 >Date: Sun, 23 Aug 2020 14:23:52 -0500 >From: Michael Rathbun <[email protected]> >Subject: Re: [chirp_users] transferring channels from one radio > manuf.to another >To: "[email protected]" > <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset=us-ascii > >On Sun, 23 Aug 2020 18:54:59 +0000 (UTC), robert moore via chirp_users ><[email protected]> wrote: > >>Hello all,I have been using chirp for a few years now to program my baofeng >>UV-5R handhelds.I have just picked up a new Leixen VV-898. All of the >>channels and settings on my Baofeng are the exact same ones that i want to >>program in to my new Leixen. Is there a way to transfer the information from >>the Baofeng to the Leixen using chirp? thanks >>Robert/ KM4ORN > >Conveying Baofeng UV-5 to an Icom IC-T7H was a matter of copy/paste, with >the occasional conflict to be resolved because of different channel usages. > >mdr > > > >------------------------------ > >Message: 2 >Date: Sun, 23 Aug 2020 12:25:45 -0700 >From: <[email protected]> >Subject: Re: [chirp_users] transferring channels from one radio > manuf.to another >To: "'robert moore'" <[email protected]>, "'Discussion of CHIRP'" > <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset="utf-8" > >Are you the same Robert Moore from ACFP? > > > > > >From: [email protected] ><[email protected]> On Behalf Of robert moore via >chirp_users >Sent: Sunday, August 23, 2020 11:55 AM >To: [email protected] >Subject: [chirp_users] transferring channels from one radio manuf.to another > > > >Hello all, > >I have been using chirp for a few years now to program my baofeng UV-5R >handhelds.I have just picked up a new Leixen VV-898. All of the channels and >settings on my Baofeng are the exact same ones that i want to program in to my >new Leixen. Is there a way to transfer the information from the Baofeng to the >Leixen using chirp? thanks > > > >Robert/ KM4ORN > >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/09033256/attachment-0001.html > >------------------------------ > >Message: 3 >Date: Sun, 23 Aug 2020 19:32:34 +0000 >From: Tim Fitch <[email protected]> >Subject: [chirp_users] ICOM 5100 >To: "[email protected]" > <[email protected]> >Message-ID: > > <by5pr17mb35055b7ec6c9a239b66083f2a4...@by5pr17mb3505.namprd17.prod.outlook.com> >Content-Type: text/plain; charset="us-ascii" > > >Will Icom 5100A ever be added to the list of supported radios to be programmed >by CHIRP? Or is there a work around so that you can program it? > >Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 > >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/1b830214/attachment-0001.html > >------------------------------ > >Message: 4 >Date: Sun, 23 Aug 2020 14:58:03 -0600 >From: Brian Erickson <[email protected]> >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >To: Discussion of CHIRP <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset="utf-8" > >I have the cable needed to be held into the radio really hard for it to work. > >Sent from my iPad > >> On Aug 23, 2020, at 12:32 PM, Charles Gierke <[email protected]> wrote: >> >> ? The cable has been working since August 2019. for over a year no >> problems. perhaps the warranty is up lol >> >>>>> On August 23, 2020 at 8:34 AM Jardy via chirp_users >>>>> <[email protected]> wrote: >>>>> >>>>> Did you check Windows Device Manager to see if your cable shows to be a >>>>> Prolific cable? If it is, try rolling your driver back to 3.2.0.0. Check >>>>> www.miklor.com for info. Check under Drivers. >>>>> >>>>> Jardy Dawson WA7JRD >>>>> >>>>> Message sent by....Oh look!! Pretty lights!! >>>>> >>>>> >>>>> On Aug 23, 2020, at 08:24, Gary A. Cox <[email protected]> wrote: >>>>> >>>>> ?Charles, >>>>> I have never gotten my radios to sync either and Finely gave up. >>>>> I even bought 2 cables thinking it was a cable I followed all the >>>>> instructions just like you. >>>>> If you succeed, please email me back >>>>> >>>>> Gary A Cox >>>>> Sent from my iPhone >>>>> >>>>>> On Aug 22, 2020, at 4:12 PM, Alan Hill <[email protected]> wrote: >>>>>> >>>>>> ? >>>>>> Try making sure you vigorously plug the connector into the radio and >>>>>> hold it in while loading from chirp. Also turn the volume up from >>>>>> minimum. Last resort run chirp as adminstrator. >>>>>> >>>>>> >>>>>> On Sat, Aug 22, 2020, 3:45 PM Charles Gierke < [email protected]> wrote: >>>>>>> On Wednesday my 2 BaoFeng UV 5R radios could download and upload to >>>>>>> CHIRP. >>>>>>> >>>>>>> On Friday all I got was the following message: Radio Did Not Respond. >>>>>>> >>>>>>> I tried reloading the latest version of CHIRP, no change. I tried an >>>>>>> earlier version of CHIRP, no change. I reloaded the latest version >>>>>>> back, no change. Visually the radio's red light blinks then the LED >>>>>>> display blinks then the error message shows up on CHIRP. >>>>>>> >>>>>>> >>>>>>> >>>>>>> Any suggestions? >>>>>>> >>>>>>> Thanks Chuck KJ7INT >>>>>>> >>>>>>> _______________________________________________ >>>>>>> chirp_users mailing list >>>>>>>[email protected] >>>>>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>>>>>> This message was sent to Silver Fox at [email protected] >>>>>>> To unsubscribe, send an email to >>>>>>> [email protected] >>>>>> _______________________________________________ >>>>>> chirp_users mailing list >>>>>>[email protected] >>>>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>>>>> This message was sent to Gary at [email protected] >>>>>> To unsubscribe, send an email to >>>>>> [email protected] >>>>> _______________________________________________ >>>>> chirp_users mailing list >>>>>[email protected] >>>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>>>> This message was sent to Jardy at [email protected] >>>>> To unsubscribe, send an email to >>>>> [email protected] >>> >>> >>> _______________________________________________ >>> chirp_users mailing list >>>[email protected] >>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Chuck at [email protected] >>> To unsubscribe, send an email to >>> [email protected] >> >> _______________________________________________ >> chirp_users mailing list >>[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Brian at [email protected] >> To unsubscribe, send an email to >> [email protected] >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/a3522361/attachment-0001.html > >------------------------------ > >Message: 5 >Date: Sun, 23 Aug 2020 14:47:57 -0700 (MST) >From: Charles Gierke <[email protected]> >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >To: Discussion of CHIRP <[email protected]>, Jim > Unroe <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset="utf-8" > >no luck yet. >I tried pressure straight into the radio, to the back side of the radio, to >the front side of the radio, to the top of the radio and to the bottom of the >radio. >similar results, the LCD screen blinks and goes back to the beginning screen. > >thanks again for the suggestion > >> On August 22, 2020 at 3:50 PM Jim Unroe < [email protected] >> mailto:[email protected] > wrote: >> >> >> On Sat, Aug 22, 2020 at 6:46 PM Charles Gierke < [email protected] >> mailto:[email protected] > wrote: >> > >> >> > > On Wednesday my 2 BaoFeng UV 5R radios could download and >> upload to CHIRP. >> > >> > > >> > > On Friday all I got was the following message: Radio Did Not >> Respond. >> > >> > > >> > > I tried reloading the latest version of CHIRP, no change. I >> tried an earlier version of CHIRP, no change. I reloaded the latest version >> back, no change. Visually the radio's red light blinks then the LED display >> blinks then the error message shows up on CHIRP. >> > >> > > > >> >> > > Any suggestions? >> > >> > > >> > > Thanks Chuck KJ7INT >> > >> > > Hi Chuck, >> >> You will get the exact same error message if you don't plug the 2-pin >> plug into the radio. So make sure that the 2-pin plug is fully >> inserted into the socket of the radio. Some have had to put a little >> pressure on the plug during the cloning process. >> >> Jim KC9HI >> _______________________________________________ >> chirp_users mailing list >>[email protected] mailto:[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Chuck at [email protected] mailto:[email protected] >> To unsubscribe, send an email to >> [email protected] >> mailto:[email protected] >> >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/f8e9fc25/attachment-0001.html > >------------------------------ > >Message: 6 >Date: Sun, 23 Aug 2020 14:55:01 -0700 (MST) >From: Charles Gierke <[email protected]> >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >To: Discussion of CHIRP <[email protected]>, Alan > Hill <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset="utf-8" > >NO luck yet. I held the plug in as far as it would go, no change. I turned the >volume up all the way, no luck. I closed CHIRP and re-opened as >Administrator,still no luck up or downloading. > >thanks for your assistance > > >> On August 22, 2020 at 4:11 PM Alan Hill <[email protected]> wrote: >> >> Try making sure you vigorously plug the connector into the radio and >> hold it in while loading from chirp. Also turn the volume up from minimum. >> Last resort run chirp as adminstrator. >> >> >> On Sat, Aug 22, 2020, 3:45 PM Charles Gierke < [email protected] >> mailto:[email protected] > wrote: >> >> > > >> > On Wednesday my 2 BaoFeng UV 5R radios could download and upload >> to CHIRP. >> > >> > On Friday all I got was the following message: Radio Did Not >> Respond. >> > >> > I tried reloading the latest version of CHIRP, no change. I >> tried an earlier version of CHIRP, no change. I reloaded the latest version >> back, no change. Visually the radio's red light blinks then the LED display >> blinks then the error message shows up on CHIRP. >> > >> > >> > Any suggestions? >> > >> > Thanks Chuck KJ7INT >> > >> > _______________________________________________ >> > chirp_users mailing list >> > [email protected] >> mailto:[email protected] >> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> > This message was sent to Silver Fox at [email protected] >> mailto:[email protected] >> > To unsubscribe, send an email to >> [email protected] >> mailto:[email protected] >> > >> > > _______________________________________________ >> chirp_users mailing list >>[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Chuck at [email protected] >> To unsubscribe, send an email to >> [email protected] >> > >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/65594809/attachment-0001.html > >------------------------------ > >Message: 7 >Date: Sun, 23 Aug 2020 15:04:59 -0700 (MST) >From: Charles Gierke <[email protected]> >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >To: Discussion of CHIRP <[email protected]>, John > LaMartina <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset="utf-8" > >hi, still no luck. >I went to the web site and put a death-grip on the plug and held it in as far >as it would go. I trimmed a hair of the edges of the plug to let it seat on >the bottom. > >thanks for the suggestions > > >> On August 22, 2020 at 5:55 PM John LaMartina <[email protected]> wrote: >> >> This may assist. >>Www.Miklor.com/COM/UV_ErrorMess.php >> >> John >>Www.Miklor.com/UV5R >> >> >> >> > > On Aug 22, 2020, at 6:45 PM, Charles Gierke <[email protected]> >> wrote: >> > >> > >> > > >> > > ? >> > >> > On Wednesday my 2 BaoFeng UV 5R radios could download and upload >> to CHIRP. >> > >> > On Friday all I got was the following message: Radio Did Not >> Respond. >> > >> > I tried reloading the latest version of CHIRP, no change. I >> tried an earlier version of CHIRP, no change. I reloaded the latest version >> back, no change. Visually the radio's red light blinks then the LED display >> blinks then the error message shows up on CHIRP. >> > >> > >> > Any suggestions? >> > >> > Thanks Chuck KJ7INT >> > >> > _______________________________________________ >> > chirp_users mailing list >> > [email protected] >> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> > This message was sent to John LaMartina at [email protected] >> > To unsubscribe, send an email to >> [email protected] >> > >> > > > > >> _______________________________________________ >> chirp_users mailing list >>[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Chuck at [email protected] >> To unsubscribe, send an email to >> [email protected] >> > >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/1822ebfe/attachment-0001.html > >------------------------------ > >Message: 8 >Date: Mon, 24 Aug 2020 00:08:56 +0200 >From: Don Goodrich <[email protected]> >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >To: [email protected] >Message-ID: > > <trinity-c73ec6b2-1e51-44c1-b303-6c1692159291-1598220536913@3c-app-mailcom-lxa13> >Content-Type: text/plain; charset="us-ascii" > >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/d79dd822/attachment-0001.html > >------------------------------ > >Message: 9 >Date: Sun, 23 Aug 2020 15:13:49 -0700 (MST) >From: Charles Gierke <[email protected]> >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >To: Discussion of CHIRP <[email protected]>, R G > <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset="utf-8" > >hi, no luck. I tried disconnecting the cable and re-inserting the cable. no >luck, the problem is occurring between 3 and 4 seconds into the program. > >thanks for the suggestion > > >> On August 22, 2020 at 7:10 PM R G <[email protected]> wrote: >> >> >> Hi; >> >> I?m new, however this happened to me several times. I found that if I >> disconnected the cable and started everything from START, it solved my >> problem every time...Hope this helps...Like I said I am NEW to this. ;} >> >> Regards >> >> Ron >> >> >> >> Sent from Mail https://go.microsoft.com/fwlink/?LinkId=550986 for >> Windows 10 >> >> >> >> From: John LaMartina mailto:[email protected] >> Sent: August 22, 2020 8:56 PM >> To: Discussion of CHIRP mailto:[email protected] >> Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >> >> >> >> This may assist. >> >>Www.Miklor.com/COM/UV_ErrorMess.php >> >> >> >> John >> >>Www.Miklor.com/UV5R >> >> >> >> >> >> > > >> > On Aug 22, 2020, at 6:45 PM, Charles Gierke <[email protected]> >> wrote: >> > >> > > >> > > >> > ? >> > >> > On Wednesday my 2 BaoFeng UV 5R radios could download and upload >> to CHIRP. >> > >> > On Friday all I got was the following message: Radio Did Not >> Respond. >> > >> > I tried reloading the latest version of CHIRP, no change. I >> tried an earlier version of CHIRP, no change. I reloaded the latest version >> back, no change. Visually the radio's red light blinks then the LED display >> blinks then the error message shows up on CHIRP. >> > >> > >> > >> > Any suggestions? >> > >> > Thanks Chuck KJ7INT >> > >> > > >> _______________________________________________ >> chirp_users mailing list >>[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to John LaMartina at [email protected] >> To unsubscribe, send an email to >> [email protected] >> >> >> > > >> _______________________________________________ >> chirp_users mailing list >>[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Chuck at [email protected] >> To unsubscribe, send an email to >> [email protected] >> > >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/f219174f/attachment-0001.html > >------------------------------ > >Message: 10 >Date: Sun, 23 Aug 2020 18:29:37 -0400 (EDT) >From: "Nigel A. Gunn G8IFF/W8IFF" <[email protected]> >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >To: Discussion of CHIRP <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset="utf-8" > >Might help if we knew where you were located. > > >> On 23 August 2020 at 18:04 Charles Gierke <[email protected]> wrote: >> >> hi, still no luck. >> I went to the web site and put a death-grip on the plug and held it in >> as far as it would go. I trimmed a hair of the edges of the plug to let it >> seat on the bottom. >> >> thanks for the suggestions >> >> >> > > On August 22, 2020 at 5:55 PM John LaMartina <[email protected]> >> wrote: >> > >> > This may assist. >> > Www.Miklor.com/COM/UV_ErrorMess.php >> > >> > John >> > Www.Miklor.com/UV5R >> > >> > >> > >> > > > > On Aug 22, 2020, at 6:45 PM, Charles Gierke >> <[email protected]> wrote: >> > > >> > > >> > > > > >> > > > > >> > > On Wednesday my 2 BaoFeng UV 5R radios could download and >> upload to CHIRP. >> > > >> > > On Friday all I got was the following message: Radio Did >> Not Respond. >> > > >> > > I tried reloading the latest version of CHIRP, no change. >> I tried an earlier version of CHIRP, no change. I reloaded the latest >> version back, no change. Visually the radio's red light blinks then the LED >> display blinks then the error message shows up on CHIRP. >> > > >> > > >> > > Any suggestions? >> > > >> > > Thanks Chuck KJ7INT >> > > >> > > _______________________________________________ >> > > chirp_users mailing list >> > > [email protected] >> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> > > This message was sent to John LaMartina at [email protected] >> > > To unsubscribe, send an email to >> [email protected] >> > > >> > > > > >> > > >> >> > > _______________________________________________ >> > chirp_users mailing list >> > [email protected] >> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> > This message was sent to Chuck at [email protected] >> > To unsubscribe, send an email to >> [email protected] >> > >> > > _______________________________________________ chirp_users >> mailing list >> [email protected]http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Nigel Gunn, W8IFF at [email protected] To >> unsubscribe, send an email to [email protected] >> > > > >Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 >Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] www >http://www.ngunn.net >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/74fe899a/attachment-0001.html > >------------------------------ > >Message: 11 >Date: Sun, 23 Aug 2020 16:26:04 -0700 >From: "Silverfox" <[email protected]> >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >To: "'Discussion of CHIRP'" <[email protected]>, > "'John LaMartina'" <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset="utf-8" > >I forgot that you are on Windows. The windows OS is very poor supporting USB. > You might try going into the device manager and tell it to show hidden >devices. Once that is done, look at the USB entries and delete all of them >that are diminished icons. That is, they are lighter than the other icons. >Good luck. >Alan > >From: [email protected] >[mailto:[email protected]] On Behalf Of Charles Gierke >Sent: Sunday, August 23, 2020 3:05 PM >To: Discussion of CHIRP; John LaMartina >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating > >hi, still no luck. >I went to the web site and put a death-grip on the plug and held it in as far >as it would go. I trimmed a hair of the edges of the plug to let it seat on >the bottom. > >thanks for the suggestions > > > >On August 22, 2020 at 5:55 PM John LaMartina <[email protected]> wrote: >This may assist. >Www.Miklor.com/COM/UV_ErrorMess.php > >John >Www.Miklor.com/UV5R > > > > >On Aug 22, 2020, at 6:45 PM, Charles Gierke <[email protected]> wrote: >? >On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP. >On Friday all I got was the following message: Radio Did Not Respond. >I tried reloading the latest version of CHIRP, no change. I tried an earlier >version of CHIRP, no change. I reloaded the latest version back, no change. >Visually the radio's red light blinks then the LED display blinks then the >error message shows up on CHIRP. > >Any suggestions? >Thanks Chuck KJ7INT >_______________________________________________ >chirp_users mailing list >[email protected] >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to John LaMartina at [email protected] >To unsubscribe, send an email to [email protected] > > >_______________________________________________ >chirp_users mailing list >[email protected] >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to Chuck at [email protected] >To unsubscribe, send an email to [email protected] > > >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/5c54a1a5/attachment-0001.html > >------------------------------ > >Message: 12 >Date: Sun, 23 Aug 2020 19:03:11 -0500 >From: Chuck Hast <[email protected]> >Subject: Re: [chirp_users] ICOM 5100 >To: Discussion of CHIRP <[email protected]> >Message-ID: > <CAN9xdP_vnndYFcyCzW-bGb=PS1JHdAwn8JQ5x0WyJ=O1=6J=d...@mail.gmail.com> >Content-Type: text/plain; charset="utf-8" > >I have asked the same question, I have even offered the use of my radio to >test it, sure >would be nice to get the 5100A in under Chirp. > > >On Sun, Aug 23, 2020 at 2:33 PM Tim Fitch <[email protected]> wrote: > >> >> >> Will Icom 5100A ever be added to the list of supported radios to be >> programmed by CHIRP? Or is there a work around so that you can program it? >> >> >> >> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for >> Windows 10 >> >> >> _______________________________________________ >> chirp_users mailing list >>[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Chuck Hast at [email protected] >> To unsubscribe, send an email to >>[email protected] > > > >-- >Chirp + Editcp + MD380Tools on Linux >Celestial!!! >Chuck -- KP4DJT >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/c0ebb95b/attachment-0001.html > >------------------------------ > >Message: 13 >Date: Sun, 23 Aug 2020 21:01:57 -0400 >From: "Jean C. Velez" <[email protected]> >Subject: Re: [chirp_users] ICOM 5100 >To: Discussion of CHIRP <[email protected]> >Message-ID: > <CAB__4Zv=m8o7e=3gl7xekqsrdjejhku3prunwnvelya30md...@mail.gmail.com> >Content-Type: text/plain; charset="utf-8" > >What about for ID4100a? > >On Sun, Aug 23, 2020 at 20:03 Chuck Hast <[email protected]> wrote: > >> I have asked the same question, I have even offered the use of my radio to >> test it, sure >> would be nice to get the 5100A in under Chirp. >> >> >> On Sun, Aug 23, 2020 at 2:33 PM Tim Fitch <[email protected]> wrote: >> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> Will Icom 5100A ever be added to the list of supported radios to be >>> programmed by CHIRP? Or is there a work around so that you can program it? >>> >>> >>> >>> >>> >>> Sent from >>> >>> Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> _______________________________________________ >>> >>> >>> chirp_users mailing list >>> >>> >>>[email protected] >>> >>> >>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> >>> >>> This message was sent to Chuck Hast at [email protected] >>> >>> >>> To unsubscribe, send an email to >>>[email protected] >> >> >> >> -- >> Chirp + Editcp + MD380Tools on Linux >> Celestial!!! >> Chuck -- KP4DJT >> >> >> _______________________________________________ >> >> chirp_users mailing list >> >>[email protected] >> >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> >> This message was sent to JEAN VELEZ at [email protected] >> >> To unsubscribe, send an email to >>[email protected] > >-- >null >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/5db1d60c/attachment-0001.html > >------------------------------ > >Message: 14 >Date: Sun, 23 Aug 2020 20:48:29 -0500 >From: Chuck Hast <[email protected]> >Subject: Re: [chirp_users] ICOM 5100 >To: Discussion of CHIRP <[email protected]> >Message-ID: > <can9xdp96p7tcsfeza3qubsxkumn8hmghunz2kr4u+xrgjln...@mail.gmail.com> >Content-Type: text/plain; charset="utf-8" > >I would almost bet that we get the 5100a running the 4100a might >come in on the same ticket, radio appears to be a subset of the >5100a. > >On Sun, Aug 23, 2020 at 8:03 PM Jean C. Velez <[email protected]> wrote: > >> What about for ID4100a? >> >> On Sun, Aug 23, 2020 at 20:03 Chuck Hast <[email protected]> wrote: >> >>> I have asked the same question, I have even offered the use of my radio >>> to test it, sure >>> would be nice to get the 5100A in under Chirp. >>> >>> >>> On Sun, Aug 23, 2020 at 2:33 PM Tim Fitch <[email protected]> wrote: >>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> Will Icom 5100A ever be added to the list of supported radios to be >>>> programmed by CHIRP? Or is there a work around so that you can program >>>> it? >>>> >>>> >>>> >>>> >>>> >>>> Sent from >>>> >>>> Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> >>>> >>>> chirp_users mailing list >>>> >>>> >>>>[email protected] >>>> >>>> >>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>>> >>>> >>>> This message was sent to Chuck Hast at [email protected] >>>> >>>> >>>> To unsubscribe, send an email to >>>>[email protected] >>> >>> >>> >>> -- >>> Chirp + Editcp + MD380Tools on Linux >>> Celestial!!! >>> Chuck -- KP4DJT >>> >>> >>> _______________________________________________ >>> >>> chirp_users mailing list >>> >>>[email protected] >>> >>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> >>> This message was sent to JEAN VELEZ at [email protected] >>> >>> To unsubscribe, send an email to >>>[email protected] >> >> -- >> null >> _______________________________________________ >> chirp_users mailing list >>[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Chuck Hast at [email protected] >> To unsubscribe, send an email to >>[email protected] > > > >-- >Chirp + Editcp + MD380Tools on Linux >Celestial!!! >Chuck -- KP4DJT >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/2d94dd5e/attachment-0001.html > >------------------------------ > >Message: 15 >Date: Sun, 23 Aug 2020 21:15:32 -0700 >From: Jeremiah Williams <[email protected]> >Subject: [chirp_users] Baofeng UV-9r plus cable issues >To: [email protected] >Message-ID: <[email protected]> >Content-Type: text/plain; charset=utf-8 > >My Baofeng cable is a ch340. I says error when I try to upload my radio. Any >suggestions? Or do I need a different cable? >I?ve already tried all the things google info has. Download prolific etc... > >Jeremiah W. > > >------------------------------ > >Message: 16 >Date: Sun, 23 Aug 2020 22:02:18 -0700 >From: Jardy <[email protected]> >Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues >To: Jeremiah Williams <[email protected]>, Discussion of CHIRP > <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset="utf-8" > >Make sure you try to download from the radio before you write to the radio. > >Jardy Dawson WA7JRD > >Message sent by....Oh look!! Pretty lights!! > > >> On Aug 23, 2020, at 21:16, Jeremiah Williams via chirp_users >> <[email protected]> wrote: >> >> ?My Baofeng cable is a ch340. I says error when I try to upload my radio. >> Any suggestions? Or do I need a different cable? >> I?ve already tried all the things google info has. Download prolific etc... >> >> Jeremiah W. >> _______________________________________________ >> chirp_users mailing list >>[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Jardy at [email protected] >> To unsubscribe, send an email to >> [email protected] >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/baa0da3c/attachment-0001.html > >------------------------------ > >Message: 17 >Date: Mon, 24 Aug 2020 00:41:13 -0500 >From: W Paul Mills <[email protected]> >Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues >To: Jeremiah Williams via chirp_users > <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset=utf-8; format=flowed > >Prolific driver is _NOT_ for use with a CH340 chip. > >Are you sure you are using the right COM port. What operating system are >you using? What is the exact error? > >On 8/23/20 11:15 PM, Jeremiah Williams via chirp_users wrote: >> My Baofeng cable is a ch340. I says error when I try to upload my radio. >> Any suggestions? Or do I need a different cable? >> I?ve already tried all the things google info has. Download prolific etc... >> >> Jeremiah W. >> _______________________________________________ >> chirp_users mailing list >>[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Paul AC0HY at [email protected] >> To unsubscribe, send an email to >> [email protected] > > >-- >/************************************************** >* Amateur Radio Station AC0HY * >* W. Paul Mills SN807 * >* Assistant EC Alpha-1 ARES Shawnee/Wabaunsee, KS * >* President Kaw Valley Amateur Radio Club * >**************************************************/ > > > >------------------------------ > >Message: 18 >Date: Mon, 24 Aug 2020 07:05:47 -0400 >From: Jim Unroe <[email protected]> >Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues >To: Jeremiah Williams <[email protected]>, Discussion of CHIRP > <[email protected]> >Message-ID: > <CADnO8U7rG53c7-eVo1Wpc9=sjhhuh+qcb6oyrlrt9bjybep...@mail.gmail.com> >Content-Type: text/plain; charset="UTF-8" > >On Mon, Aug 24, 2020 at 12:17 AM Jeremiah Williams via chirp_users ><[email protected]> wrote: >> >> My Baofeng cable is a ch340. I says error when I try to upload my radio. >> Any suggestions? Or do I need a different cable? >> I?ve already tried all the things google info has. Download prolific etc... >> >> Jeremiah W. > >What is the exact error (or better yet, attach a debug.log file)? > >Jim KC9HI > > >------------------------------ > >Message: 19 >Date: Mon, 24 Aug 2020 07:52:47 -0400 >From: Jim Unroe <[email protected]> >Subject: Re: [chirp_users] transferring channels from one radio > manuf.to another >To: robert moore <[email protected]>, Discussion of CHIRP > <[email protected]> >Message-ID: > <cadno8u7vs_vyaones3zmjhgqb1qd1ytd4bsktuysffg1a+v...@mail.gmail.com> >Content-Type: text/plain; charset="UTF-8" > >On Sun, Aug 23, 2020 at 2:56 PM robert moore via chirp_users ><[email protected]> wrote: >> >> Hello all, >> I have been using chirp for a few years now to program my baofeng UV-5R >> handhelds.I have just picked up a new Leixen VV-898. All of the channels and >> settings on my Baofeng are the exact same ones that i want to program in to >> my new Leixen. Is there a way to transfer the information from the Baofeng >> to the Leixen using chirp? thanks >> >> Robert/ KM4ORN > >Robert, > >The first thing you need to do is to make sure CHIRP can even program >your VV-898. Leixen has changed the radio since the original CHIRP >support was created and may have broken it (according to some open >issues). > >If CHIRP does program your VV-898 OK, then all you need to do is >import a saved CHIRP Radio Images (*.img) file from your UV-5R into a >tab from your VV-898. I use a UV-5R image as the master from >programming all of my CHIRP supported dual-band radios. A more >detailed explanation can be found here. > >https://baofengtech.com/CHIRPImport > >Jim KC9HI > > >------------------------------ > >Message: 20 >Date: Mon, 24 Aug 2020 12:04:32 +0000 (UTC) >From: richard ward <[email protected]> >Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues >To: Discussion of CHIRP <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset="utf-8" > > Yes you do have to upload whats already in the Radio even if youve set it to > default to clear all IE the chinese channels? you can start a fresh page > before your download withinin chirp? the download button will be available > i/e more lit up when youve done that then cilck on the channels you want to > download good luck > On Monday, 24 August 2020, 12:08:49 BST, Jim Unroe <[email protected]> > wrote: > > On Mon, Aug 24, 2020 at 12:17 AM Jeremiah Williams via chirp_users ><[email protected]> wrote: >> >> My Baofeng cable is a ch340. I says error when I try to upload my radio. >> Any suggestions? Or do I need a different cable? >> I?ve already tried all the things google info has. Download prolific etc... >> >> Jeremiah W. > >What is the exact error (or better yet, attach a debug.log file)? > >Jim KC9HI >_______________________________________________ >chirp_users mailing list >[email protected] >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to rich at [email protected] >To unsubscribe, send an email to [email protected] >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/f98e36be/attachment-0001.html > >------------------------------ > >Message: 21 >Date: Mon, 24 Aug 2020 06:03:54 -0700 >From: Jeremiah Williams <[email protected]> >Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues >To: Jim Unroe <[email protected]> >Cc: Discussion of CHIRP <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset=utf-8 > >Thank you all for your help. The message error says ?radio did not respond ?, >but my radio light turn on and it starts to talk. > > >Jeremiah W. > >> On Aug 24, 2020, at 4:05 AM, Jim Unroe <[email protected]> wrote: >> >> On Mon, Aug 24, 2020 at 12:17 AM Jeremiah Williams via chirp_users >> <[email protected]> wrote: >>> >>> My Baofeng cable is a ch340. I says error when I try to upload my radio. >>> Any suggestions? Or do I need a different cable? >>> I?ve already tried all the things google info has. Download prolific etc... >>> >>> Jeremiah W. >> >> What is the exact error (or better yet, attach a debug.log file)? >> >> Jim KC9HI > > > >------------------------------ > >Message: 22 >Date: Mon, 24 Aug 2020 13:26:33 -0400 >From: "John La" <[email protected]> >Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues >To: "'Jeremiah Williams'" <[email protected]>, "'Discussion of > CHIRP'" <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset="UTF-8" > >Here is a list of Common Error Messages > >www.Miklor.com/COM/UV_ErrorMess.php > >Stay safe and Stay healthy. >John K3NXU > > >-----Original Message----- >From: [email protected] >[mailto:[email protected]] On Behalf Of Jeremiah >Williams via chirp_users >Sent: Monday, August 24, 2020 9:04 AM >To: Jim Unroe >Cc: Discussion of CHIRP >Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues > >Thank you all for your help. The message error says ?radio did not respond ?, >but my radio light turn on and it starts to talk. > > >Jeremiah W. > >> On Aug 24, 2020, at 4:05 AM, Jim Unroe <[email protected]> wrote: >> >> On Mon, Aug 24, 2020 at 12:17 AM Jeremiah Williams via chirp_users >> <[email protected]> wrote: >>> >>> My Baofeng cable is a ch340. I says error when I try to upload my radio. >>> Any suggestions? Or do I need a different cable? >>> I?ve already tried all the things google info has. Download prolific etc... >>> >>> Jeremiah W. >> >> What is the exact error (or better yet, attach a debug.log file)? >> >> Jim KC9HI > >_______________________________________________ >chirp_users mailing list >[email protected] >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to John LaMartina at [email protected] >To unsubscribe, send an email to [email protected] > > > >------------------------------ > >_______________________________________________ >chirp_users mailing list >[email protected] >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >To unsubscribe, send an email to [email protected] > >End of chirp_users Digest, Vol 140, Issue 10 >******************************************** _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
