do you have a answer for me on message for number 3 ------ Original Message ------ From: [email protected] To: [email protected] Sent: 8/25/2020 2:00:02 PM Subject: chirp_users Digest, Vol 140, Issue 11
>Send chirp_users mailing list submissions to >[email protected] > >To subscribe or unsubscribe via the World Wide Web, visit >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >or, via email, send a message with subject or body 'help' to >[email protected] > >You can reach the person managing the list at >[email protected] > >When replying, please edit your Subject line so it is more specific >than "Re: Contents of chirp_users digest..." > > >Today's Topics: > > 1. Re: Zastone ZT-X6 : Chirp "Radio Identification Failed" > (Victor Lim) > 2. Re: chirp_users Digest, Vol 140, Issue 10 (Tommy Long) > 3. Re: chirp_users Digest, Vol 140, Issue 10 > (Nigel A. Gunn G8IFF/W8IFF) > 4. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke) > 5. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke) > 6. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke) > 7. Re: Chirp and BaoFeng UV 5R not communicating (Glenn K0LNY) > 8. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke) > 9. Re: Chirp and BaoFeng UV 5R not communicating (Peter J. McClosky) > 10. Re: Chirp and BaoFeng UV 5R not communicating > (Nigel A. Gunn G8IFF/W8IFF) > 11. Re: chirp_users Digest, Vol 140, Issue 10 (Chuck Hast) > 12. oddities (failures) finding/installing on Ubuntu 20.04 > (Ted Timmons) > 13. Re: oddities (failures) finding/installing on Ubuntu 20.04 > (Allen Roark) > 14. Re: oddities (failures) finding/installing on Ubuntu 20.04 > ([email protected]) > 15. Re: oddities (failures) finding/installing on Ubuntu 20.04 > (Glenn K0LNY) > 16. Re: oddities (failures) finding/installing on Ubuntu 20.04 > (Nigel A. Gunn G8IFF/W8IFF) > 17. Re: oddities (failures) finding/installing on Ubuntu 20.04 > (Tony Fuller) > 18. Re: oddities (failures) finding/installing on Ubuntu 20.04 > (Nigel A. Gunn G8IFF/W8IFF) > 19. Re: oddities (failures) finding/installing on Ubuntu 20.04 > (Ted Timmons) > 20. Re: oddities (failures) finding/installing on Ubuntu 20.04 > (Nigel A. Gunn G8IFF/W8IFF) > 21. Re: oddities (failures) finding/installing on Ubuntu 20.04 > (Ted Timmons) > 22. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke) > 23. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke) > 24. Re: Chirp and BaoFeng UV 5R not communicating (Glenn K0LNY) > > >---------------------------------------------------------------------- > >Message: 1 >Date: Mon, 24 Aug 2020 13:00:57 -0700 >From: Victor Lim <[email protected]> >Subject: Re: [chirp_users] Zastone ZT-X6 : Chirp "Radio Identification > Failed" >To: [email protected] >Message-ID: > <caay16c22u3rihb_d8hoparj-ah49okheemipjeh+k9suhsc...@mail.gmail.com> >Content-Type: text/plain; charset="utf-8" > >Hi - anybody can help with my Zastone X6 "Radio Identification Failed" >error? > >i confirm my laptop is running window 10 and COM4 is working for me. > >Best Regards, >Victor Seng-Keong Lim > > >On Fri, Aug 21, 2020 at 8:53 PM Victor Lim <[email protected]> wrote: > >> Subject: Zastone ZT-X6 : Chirp "Radio Identification Failed" >> Hi Sir/ Mdm, >> i have a new Zastone ZT-X6 and was experiencing "Radio identification >> failed" message when i tried to read the unit using it programming cable. >> I installed the latest Chirp SW for Windows . >> I'm first timer on Chirp. Pls advise how can i fixed this issue to have >> my ZT-X6 programmed. Thank you very much. >> >> Best Regards, >> Victor >> >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/e20e635b/attachment-0001.html > >------------------------------ > >Message: 2 >Date: Mon, 24 Aug 2020 20:02:06 +0000 >From: "Tommy Long" <[email protected]> >Subject: Re: [chirp_users] chirp_users Digest, Vol 140, Issue 10 >To: [email protected] >Message-ID: <em0e8c541d-d8f7-4cba-a438-045d096051da@desktop-dcjtf13> >Content-Type: text/plain; charset=utf-8; format=flowed > >Do you ever think they will fix them to download radio reference ? > >------ Original Message ------ >From: [email protected] >To: [email protected] >Sent: 8/24/2020 2:00:02 PM >Subject: chirp_users Digest, Vol 140, Issue 10 > >>Send chirp_users mailing list submissions to >>[email protected] >> >>To subscribe or unsubscribe via the World Wide Web, visit >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>or, via email, send a message with subject or body 'help' to >>[email protected] >> >>You can reach the person managing the list at >>[email protected] >> >>When replying, please edit your Subject line so it is more specific >>than "Re: Contents of chirp_users digest..." >> >> >>Today's Topics: >> >> 1. Re: transferring channels from one radio manuf.to another >> (Michael Rathbun) >> 2. Re: transferring channels from one radio manuf.to another >> ([email protected]) >> 3. ICOM 5100 (Tim Fitch) >> 4. Re: Chirp and BaoFeng UV 5R not communicating (Brian Erickson) >> 5. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke) >> 6. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke) >> 7. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke) >> 8. Re: Chirp and BaoFeng UV 5R not communicating (Don Goodrich) >> 9. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke) >> 10. Re: Chirp and BaoFeng UV 5R not communicating >> (Nigel A. Gunn G8IFF/W8IFF) >> 11. Re: Chirp and BaoFeng UV 5R not communicating (Silverfox) >> 12. Re: ICOM 5100 (Chuck Hast) >> 13. Re: ICOM 5100 (Jean C. Velez) >> 14. Re: ICOM 5100 (Chuck Hast) >> 15. Baofeng UV-9r plus cable issues (Jeremiah Williams) >> 16. Re: Baofeng UV-9r plus cable issues (Jardy) >> 17. Re: Baofeng UV-9r plus cable issues (W Paul Mills) >> 18. Re: Baofeng UV-9r plus cable issues (Jim Unroe) >> 19. Re: transferring channels from one radio manuf.to another >> (Jim Unroe) >> 20. Re: Baofeng UV-9r plus cable issues (richard ward) >> 21. Re: Baofeng UV-9r plus cable issues (Jeremiah Williams) >> 22. Re: Baofeng UV-9r plus cable issues (John La) >> >> >>---------------------------------------------------------------------- >> >>Message: 1 >>Date: Sun, 23 Aug 2020 14:23:52 -0500 >>From: Michael Rathbun <[email protected]> >>Subject: Re: [chirp_users] transferring channels from one radio >> manuf.to another >>To: "[email protected]" >> <[email protected]> >>Message-ID: <[email protected]> >>Content-Type: text/plain; charset=us-ascii >> >>On Sun, 23 Aug 2020 18:54:59 +0000 (UTC), robert moore via chirp_users >><[email protected]> wrote: >> >>>Hello all,I have been using chirp for a few years now to program my baofeng >>>UV-5R handhelds.I have just picked up a new Leixen VV-898. All of the >>>channels and settings on my Baofeng are the exact same ones that i want to >>>program in to my new Leixen. Is there a way to transfer the information from >>>the Baofeng to the Leixen using chirp? thanks >>>Robert/ KM4ORN >> >>Conveying Baofeng UV-5 to an Icom IC-T7H was a matter of copy/paste, with >>the occasional conflict to be resolved because of different channel usages. >> >>mdr >> >> >> >>------------------------------ >> >>Message: 2 >>Date: Sun, 23 Aug 2020 12:25:45 -0700 >>From: <[email protected]> >>Subject: Re: [chirp_users] transferring channels from one radio >> manuf.to another >>To: "'robert moore'" <[email protected]>, "'Discussion of CHIRP'" >> <[email protected]> >>Message-ID: <[email protected]> >>Content-Type: text/plain; charset="utf-8" >> >>Are you the same Robert Moore from ACFP? >> >> >> >> >> >>From: [email protected] >><[email protected]> On Behalf Of robert moore via >>chirp_users >>Sent: Sunday, August 23, 2020 11:55 AM >>To: [email protected] >>Subject: [chirp_users] transferring channels from one radio manuf.to another >> >> >> >>Hello all, >> >>I have been using chirp for a few years now to program my baofeng UV-5R >>handhelds.I have just picked up a new Leixen VV-898. All of the channels and >>settings on my Baofeng are the exact same ones that i want to program in to >>my new Leixen. Is there a way to transfer the information from the Baofeng to >>the Leixen using chirp? thanks >> >> >> >>Robert/ KM4ORN >> >>-------------- next part -------------- >>An HTML attachment was scrubbed... >>URL: >>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/09033256/attachment-0001.html >> >>------------------------------ >> >>Message: 3 >>Date: Sun, 23 Aug 2020 19:32:34 +0000 >>From: Tim Fitch <[email protected]> >>Subject: [chirp_users] ICOM 5100 >>To: "[email protected]" >> <[email protected]> >>Message-ID: >> >> <by5pr17mb35055b7ec6c9a239b66083f2a4...@by5pr17mb3505.namprd17.prod.outlook.com> >>Content-Type: text/plain; charset="us-ascii" >> >> >>Will Icom 5100A ever be added to the list of supported radios to be >>programmed by CHIRP? Or is there a work around so that you can program it? >> >>Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 >> >>-------------- next part -------------- >>An HTML attachment was scrubbed... >>URL: >>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/1b830214/attachment-0001.html >> >>------------------------------ >> >>Message: 4 >>Date: Sun, 23 Aug 2020 14:58:03 -0600 >>From: Brian Erickson <[email protected]> >>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >>To: Discussion of CHIRP <[email protected]> >>Message-ID: <[email protected]> >>Content-Type: text/plain; charset="utf-8" >> >>I have the cable needed to be held into the radio really hard for it to work. >> >>Sent from my iPad >> >>> On Aug 23, 2020, at 12:32 PM, Charles Gierke <[email protected]> wrote: >>> >>> ? The cable has been working since August 2019. for over a year no >>> problems. perhaps the warranty is up lol >>> >>>>>> On August 23, 2020 at 8:34 AM Jardy via chirp_users >>>>>> <[email protected]> wrote: >>>>>> >>>>>> Did you check Windows Device Manager to see if your cable shows to be >>>>>> a Prolific cable? If it is, try rolling your driver back to 3.2.0.0. >>>>>> Check www.miklor.com for info. Check under Drivers. >>>>>> >>>>>> Jardy Dawson WA7JRD >>>>>> >>>>>> Message sent by....Oh look!! Pretty lights!! >>>>>> >>>>>> >>>>>> On Aug 23, 2020, at 08:24, Gary A. Cox <[email protected]> wrote: >>>>>> >>>>>> ?Charles, >>>>>> I have never gotten my radios to sync either and Finely gave up. >>>>>> I even bought 2 cables thinking it was a cable I followed all the >>>>>> instructions just like you. >>>>>> If you succeed, please email me back >>>>>> >>>>>> Gary A Cox >>>>>> Sent from my iPhone >>>>>> >>>>>>> On Aug 22, 2020, at 4:12 PM, Alan Hill <[email protected]> wrote: >>>>>>> >>>>>>> ? >>>>>>> Try making sure you vigorously plug the connector into the radio and >>>>>>> hold it in while loading from chirp. Also turn the volume up from >>>>>>> minimum. Last resort run chirp as adminstrator. >>>>>>> >>>>>>> >>>>>>> On Sat, Aug 22, 2020, 3:45 PM Charles Gierke < [email protected]> wrote: >>>>>>>> On Wednesday my 2 BaoFeng UV 5R radios could download and upload to >>>>>>>> CHIRP. >>>>>>>> >>>>>>>> On Friday all I got was the following message: Radio Did Not >>>>>>>> Respond. >>>>>>>> >>>>>>>> I tried reloading the latest version of CHIRP, no change. I tried >>>>>>>> an earlier version of CHIRP, no change. I reloaded the latest version >>>>>>>> back, no change. Visually the radio's red light blinks then the LED >>>>>>>> display blinks then the error message shows up on CHIRP. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Any suggestions? >>>>>>>> >>>>>>>> Thanks Chuck KJ7INT >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> chirp_users mailing list >>>>>>>>[email protected] >>>>>>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>>>>>>> This message was sent to Silver Fox at [email protected] >>>>>>>> To unsubscribe, send an email to >>>>>>>> [email protected] >>>>>>> _______________________________________________ >>>>>>> chirp_users mailing list >>>>>>>[email protected] >>>>>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>>>>>> This message was sent to Gary at [email protected] >>>>>>> To unsubscribe, send an email to >>>>>>> [email protected] >>>>>> _______________________________________________ >>>>>> chirp_users mailing list >>>>>>[email protected] >>>>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>>>>> This message was sent to Jardy at [email protected] >>>>>> To unsubscribe, send an email to >>>>>> [email protected] >>>> >>>> >>>> _______________________________________________ >>>> chirp_users mailing list >>>>[email protected] >>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>>> This message was sent to Chuck at [email protected] >>>> To unsubscribe, send an email to >>>> [email protected] >>> >>> _______________________________________________ >>> chirp_users mailing list >>>[email protected] >>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Brian at [email protected] >>> To unsubscribe, send an email to >>> [email protected] >>-------------- next part -------------- >>An HTML attachment was scrubbed... >>URL: >>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/a3522361/attachment-0001.html >> >>------------------------------ >> >>Message: 5 >>Date: Sun, 23 Aug 2020 14:47:57 -0700 (MST) >>From: Charles Gierke <[email protected]> >>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >>To: Discussion of CHIRP <[email protected]>, Jim >> Unroe <[email protected]> >>Message-ID: <[email protected]> >>Content-Type: text/plain; charset="utf-8" >> >>no luck yet. >>I tried pressure straight into the radio, to the back side of the radio, to >>the front side of the radio, to the top of the radio and to the bottom of the >>radio. >>similar results, the LCD screen blinks and goes back to the beginning screen. >> >>thanks again for the suggestion >> >>> On August 22, 2020 at 3:50 PM Jim Unroe < [email protected] >>> mailto:[email protected] > wrote: >>> >>> >>> On Sat, Aug 22, 2020 at 6:46 PM Charles Gierke < [email protected] >>> mailto:[email protected] > wrote: >>> > >>> >>> > > On Wednesday my 2 BaoFeng UV 5R radios could download and >>> upload to CHIRP. >>> > >>> > > >>> > > On Friday all I got was the following message: Radio Did Not >>> Respond. >>> > >>> > > >>> > > I tried reloading the latest version of CHIRP, no change. I >>> tried an earlier version of CHIRP, no change. I reloaded the latest version >>> back, no change. Visually the radio's red light blinks then the LED display >>> blinks then the error message shows up on CHIRP. >>> > >>> > > > >>> >>> > > Any suggestions? >>> > >>> > > >>> > > Thanks Chuck KJ7INT >>> > >>> > > Hi Chuck, >>> >>> You will get the exact same error message if you don't plug the 2-pin >>> plug into the radio. So make sure that the 2-pin plug is fully >>> inserted into the socket of the radio. Some have had to put a little >>> pressure on the plug during the cloning process. >>> >>> Jim KC9HI >>> _______________________________________________ >>> chirp_users mailing list >>>[email protected] mailto:[email protected] >>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Chuck at [email protected] >>> mailto:[email protected] >>> To unsubscribe, send an email to >>> [email protected] >>> mailto:[email protected] >>> >>-------------- next part -------------- >>An HTML attachment was scrubbed... >>URL: >>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/f8e9fc25/attachment-0001.html >> >>------------------------------ >> >>Message: 6 >>Date: Sun, 23 Aug 2020 14:55:01 -0700 (MST) >>From: Charles Gierke <[email protected]> >>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >>To: Discussion of CHIRP <[email protected]>, Alan >> Hill <[email protected]> >>Message-ID: <[email protected]> >>Content-Type: text/plain; charset="utf-8" >> >>NO luck yet. I held the plug in as far as it would go, no change. I turned >>the volume up all the way, no luck. I closed CHIRP and re-opened as >>Administrator,still no luck up or downloading. >> >>thanks for your assistance >> >> >>> On August 22, 2020 at 4:11 PM Alan Hill <[email protected]> wrote: >>> >>> Try making sure you vigorously plug the connector into the radio and >>> hold it in while loading from chirp. Also turn the volume up from minimum. >>> Last resort run chirp as adminstrator. >>> >>> >>> On Sat, Aug 22, 2020, 3:45 PM Charles Gierke < [email protected] >>> mailto:[email protected] > wrote: >>> >>> > > >>> > On Wednesday my 2 BaoFeng UV 5R radios could download and >>> upload to CHIRP. >>> > >>> > On Friday all I got was the following message: Radio Did Not >>> Respond. >>> > >>> > I tried reloading the latest version of CHIRP, no change. I >>> tried an earlier version of CHIRP, no change. I reloaded the latest version >>> back, no change. Visually the radio's red light blinks then the LED >>> display blinks then the error message shows up on CHIRP. >>> > >>> > >>> > Any suggestions? >>> > >>> > Thanks Chuck KJ7INT >>> > >>> > _______________________________________________ >>> > chirp_users mailing list >>> > [email protected] >>> mailto:[email protected] >>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> > This message was sent to Silver Fox at [email protected] >>> mailto:[email protected] >>> > To unsubscribe, send an email to >>> [email protected] >>> mailto:[email protected] >>> > >>> > > _______________________________________________ >>> chirp_users mailing list >>>[email protected] >>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Chuck at [email protected] >>> To unsubscribe, send an email to >>> [email protected] >>> >> >>-------------- next part -------------- >>An HTML attachment was scrubbed... >>URL: >>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/65594809/attachment-0001.html >> >>------------------------------ >> >>Message: 7 >>Date: Sun, 23 Aug 2020 15:04:59 -0700 (MST) >>From: Charles Gierke <[email protected]> >>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >>To: Discussion of CHIRP <[email protected]>, John >> LaMartina <[email protected]> >>Message-ID: <[email protected]> >>Content-Type: text/plain; charset="utf-8" >> >>hi, still no luck. >>I went to the web site and put a death-grip on the plug and held it in as far >>as it would go. I trimmed a hair of the edges of the plug to let it seat on >>the bottom. >> >>thanks for the suggestions >> >> >>> On August 22, 2020 at 5:55 PM John LaMartina <[email protected]> wrote: >>> >>> This may assist. >>>Www.Miklor.com/COM/UV_ErrorMess.php >>> >>> John >>>Www.Miklor.com/UV5R >>> >>> >>> >>> > > On Aug 22, 2020, at 6:45 PM, Charles Gierke <[email protected]> >>> wrote: >>> > >>> > >>> > > >>> > > ? >>> > >>> > On Wednesday my 2 BaoFeng UV 5R radios could download and >>> upload to CHIRP. >>> > >>> > On Friday all I got was the following message: Radio Did Not >>> Respond. >>> > >>> > I tried reloading the latest version of CHIRP, no change. I >>> tried an earlier version of CHIRP, no change. I reloaded the latest version >>> back, no change. Visually the radio's red light blinks then the LED >>> display blinks then the error message shows up on CHIRP. >>> > >>> > >>> > Any suggestions? >>> > >>> > Thanks Chuck KJ7INT >>> > >>> > _______________________________________________ >>> > chirp_users mailing list >>> > [email protected] >>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> > This message was sent to John LaMartina at [email protected] >>> > To unsubscribe, send an email to >>> [email protected] >>> > >>> > > >> >> >>> _______________________________________________ >>> chirp_users mailing list >>>[email protected] >>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Chuck at [email protected] >>> To unsubscribe, send an email to >>> [email protected] >>> >> >>-------------- next part -------------- >>An HTML attachment was scrubbed... >>URL: >>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/1822ebfe/attachment-0001.html >> >>------------------------------ >> >>Message: 8 >>Date: Mon, 24 Aug 2020 00:08:56 +0200 >>From: Don Goodrich <[email protected]> >>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >>To: [email protected] >>Message-ID: >> >> <trinity-c73ec6b2-1e51-44c1-b303-6c1692159291-1598220536913@3c-app-mailcom-lxa13> >>Content-Type: text/plain; charset="us-ascii" >> >>An HTML attachment was scrubbed... >>URL: >>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/d79dd822/attachment-0001.html >> >>------------------------------ >> >>Message: 9 >>Date: Sun, 23 Aug 2020 15:13:49 -0700 (MST) >>From: Charles Gierke <[email protected]> >>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >>To: Discussion of CHIRP <[email protected]>, R G >> <[email protected]> >>Message-ID: <[email protected]> >>Content-Type: text/plain; charset="utf-8" >> >>hi, no luck. I tried disconnecting the cable and re-inserting the cable. no >>luck, the problem is occurring between 3 and 4 seconds into the program. >> >>thanks for the suggestion >> >> >>> On August 22, 2020 at 7:10 PM R G <[email protected]> wrote: >>> >>> >>> Hi; >>> >>> I?m new, however this happened to me several times. I found that if I >>> disconnected the cable and started everything from START, it solved my >>> problem every time...Hope this helps...Like I said I am NEW to this. ;} >>> >>> Regards >>> >>> Ron >>> >>> >>> >>> Sent from Mail https://go.microsoft.com/fwlink/?LinkId=550986 for >>> Windows 10 >>> >>> >>> >>> From: John LaMartina mailto:[email protected] >>> Sent: August 22, 2020 8:56 PM >>> To: Discussion of CHIRP mailto:[email protected] >>> Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >>> >>> >>> >>> This may assist. >>> >>>Www.Miklor.com/COM/UV_ErrorMess.php >>> >>> >>> >>> John >>> >>>Www.Miklor.com/UV5R >>> >>> >>> >>> >>> >>> > > >>> > On Aug 22, 2020, at 6:45 PM, Charles Gierke <[email protected]> >>> wrote: >>> > >>> > > >>> > > >>> > ? >>> > >>> > On Wednesday my 2 BaoFeng UV 5R radios could download and >>> upload to CHIRP. >>> > >>> > On Friday all I got was the following message: Radio Did Not >>> Respond. >>> > >>> > I tried reloading the latest version of CHIRP, no change. I >>> tried an earlier version of CHIRP, no change. I reloaded the latest version >>> back, no change. Visually the radio's red light blinks then the LED >>> display blinks then the error message shows up on CHIRP. >>> > >>> > >>> > >>> > Any suggestions? >>> > >>> > Thanks Chuck KJ7INT >>> > >>> > > >>> _______________________________________________ >>> chirp_users mailing list >>>[email protected] >>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to John LaMartina at [email protected] >>> To unsubscribe, send an email to >>> [email protected] >>> >>> >>> >> >> >>> _______________________________________________ >>> chirp_users mailing list >>>[email protected] >>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Chuck at [email protected] >>> To unsubscribe, send an email to >>> [email protected] >>> >> >>-------------- next part -------------- >>An HTML attachment was scrubbed... >>URL: >>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/f219174f/attachment-0001.html >> >>------------------------------ >> >>Message: 10 >>Date: Sun, 23 Aug 2020 18:29:37 -0400 (EDT) >>From: "Nigel A. Gunn G8IFF/W8IFF" <[email protected]> >>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >>To: Discussion of CHIRP <[email protected]> >>Message-ID: <[email protected]> >>Content-Type: text/plain; charset="utf-8" >> >>Might help if we knew where you were located. >> >> >>> On 23 August 2020 at 18:04 Charles Gierke <[email protected]> wrote: >>> >>> hi, still no luck. >>> I went to the web site and put a death-grip on the plug and held it >>> in as far as it would go. I trimmed a hair of the edges of the plug to let >>> it seat on the bottom. >>> >>> thanks for the suggestions >>> >>> >>> > > On August 22, 2020 at 5:55 PM John LaMartina <[email protected]> >>> wrote: >>> > >>> > This may assist. >>> > Www.Miklor.com/COM/UV_ErrorMess.php >>> > >>> > John >>> > Www.Miklor.com/UV5R >>> > >>> > >>> > >>> > > > > On Aug 22, 2020, at 6:45 PM, Charles Gierke >>> <[email protected]> wrote: >>> > > >>> > > >>> > > > > >>> > > > > >>> > > On Wednesday my 2 BaoFeng UV 5R radios could download and >>> upload to CHIRP. >>> > > >>> > > On Friday all I got was the following message: Radio Did >>> Not Respond. >>> > > >>> > > I tried reloading the latest version of CHIRP, no change. >>> I tried an earlier version of CHIRP, no change. I reloaded the latest >>> version back, no change. Visually the radio's red light blinks then the >>> LED display blinks then the error message shows up on CHIRP. >>> > > >>> > > >>> > > Any suggestions? >>> > > >>> > > Thanks Chuck KJ7INT >>> > > >>> > > _______________________________________________ >>> > > chirp_users mailing list >>> > > [email protected] >>> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> > > This message was sent to John LaMartina at [email protected] >>> > > To unsubscribe, send an email to >>> [email protected] >>> > > >>> > > > > >>> > > >>> >>> > > _______________________________________________ >>> > chirp_users mailing list >>> > [email protected] >>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> > This message was sent to Chuck at [email protected] >>> > To unsubscribe, send an email to >>> [email protected] >>> > >>> > > _______________________________________________ chirp_users >>> mailing list >>> [email protected]http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Nigel Gunn, W8IFF at [email protected] To >>> unsubscribe, send an email to [email protected] >>> >> >> >> >>Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 >>Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] www >>http://www.ngunn.net >>-------------- next part -------------- >>An HTML attachment was scrubbed... >>URL: >>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/74fe899a/attachment-0001.html >> >>------------------------------ >> >>Message: 11 >>Date: Sun, 23 Aug 2020 16:26:04 -0700 >>From: "Silverfox" <[email protected]> >>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >>To: "'Discussion of CHIRP'" <[email protected]>, >> "'John LaMartina'" <[email protected]> >>Message-ID: <[email protected]> >>Content-Type: text/plain; charset="utf-8" >> >>I forgot that you are on Windows. The windows OS is very poor supporting >>USB. You might try going into the device manager and tell it to show hidden >>devices. Once that is done, look at the USB entries and delete all of them >>that are diminished icons. That is, they are lighter than the other icons. >>Good luck. >>Alan >> >>From: [email protected] >>[mailto:[email protected]] On Behalf Of Charles >>Gierke >>Sent: Sunday, August 23, 2020 3:05 PM >>To: Discussion of CHIRP; John LaMartina >>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >> >>hi, still no luck. >>I went to the web site and put a death-grip on the plug and held it in as far >>as it would go. I trimmed a hair of the edges of the plug to let it seat on >>the bottom. >> >>thanks for the suggestions >> >> >> >>On August 22, 2020 at 5:55 PM John LaMartina <[email protected]> wrote: >>This may assist. >>Www.Miklor.com/COM/UV_ErrorMess.php >> >>John >>Www.Miklor.com/UV5R >> >> >> >> >>On Aug 22, 2020, at 6:45 PM, Charles Gierke <[email protected]> wrote: >>? >>On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP. >>On Friday all I got was the following message: Radio Did Not Respond. >>I tried reloading the latest version of CHIRP, no change. I tried an earlier >>version of CHIRP, no change. I reloaded the latest version back, no change. >>Visually the radio's red light blinks then the LED display blinks then the >>error message shows up on CHIRP. >> >>Any suggestions? >>Thanks Chuck KJ7INT >>_______________________________________________ >>chirp_users mailing list >>[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>This message was sent to John LaMartina at [email protected] >>To unsubscribe, send an email to >>[email protected] >> >> >>_______________________________________________ >>chirp_users mailing list >>[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>This message was sent to Chuck at [email protected] >>To unsubscribe, send an email to >>[email protected] >> >> >>-------------- next part -------------- >>An HTML attachment was scrubbed... >>URL: >>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/5c54a1a5/attachment-0001.html >> >>------------------------------ >> >>Message: 12 >>Date: Sun, 23 Aug 2020 19:03:11 -0500 >>From: Chuck Hast <[email protected]> >>Subject: Re: [chirp_users] ICOM 5100 >>To: Discussion of CHIRP <[email protected]> >>Message-ID: >> <CAN9xdP_vnndYFcyCzW-bGb=PS1JHdAwn8JQ5x0WyJ=O1=6J=d...@mail.gmail.com> >>Content-Type: text/plain; charset="utf-8" >> >>I have asked the same question, I have even offered the use of my radio to >>test it, sure >>would be nice to get the 5100A in under Chirp. >> >> >>On Sun, Aug 23, 2020 at 2:33 PM Tim Fitch <[email protected]> wrote: >> >>> >>> >>> Will Icom 5100A ever be added to the list of supported radios to be >>> programmed by CHIRP? Or is there a work around so that you can program >>> it? >>> >>> >>> >>> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for >>> Windows 10 >>> >>> >>> _______________________________________________ >>> chirp_users mailing list >>>[email protected] >>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Chuck Hast at [email protected] >>> To unsubscribe, send an email to >>>[email protected] >> >> >> >>-- >>Chirp + Editcp + MD380Tools on Linux >>Celestial!!! >>Chuck -- KP4DJT >>-------------- next part -------------- >>An HTML attachment was scrubbed... >>URL: >>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/c0ebb95b/attachment-0001.html >> >>------------------------------ >> >>Message: 13 >>Date: Sun, 23 Aug 2020 21:01:57 -0400 >>From: "Jean C. Velez" <[email protected]> >>Subject: Re: [chirp_users] ICOM 5100 >>To: Discussion of CHIRP <[email protected]> >>Message-ID: >> <CAB__4Zv=m8o7e=3gl7xekqsrdjejhku3prunwnvelya30md...@mail.gmail.com> >>Content-Type: text/plain; charset="utf-8" >> >>What about for ID4100a? >> >>On Sun, Aug 23, 2020 at 20:03 Chuck Hast <[email protected]> wrote: >> >>> I have asked the same question, I have even offered the use of my radio to >>> test it, sure >>> would be nice to get the 5100A in under Chirp. >>> >>> >>> On Sun, Aug 23, 2020 at 2:33 PM Tim Fitch <[email protected]> wrote: >>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> Will Icom 5100A ever be added to the list of supported radios to be >>>> programmed by CHIRP? Or is there a work around so that you can program >>>> it? >>>> >>>> >>>> >>>> >>>> >>>> Sent from >>>> >>>> Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> >>>> >>>> chirp_users mailing list >>>> >>>> >>>>[email protected] >>>> >>>> >>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>>> >>>> >>>> This message was sent to Chuck Hast at [email protected] >>>> >>>> >>>> To unsubscribe, send an email to >>>>[email protected] >>> >>> >>> >>> -- >>> Chirp + Editcp + MD380Tools on Linux >>> Celestial!!! >>> Chuck -- KP4DJT >>> >>> >>> _______________________________________________ >>> >>> chirp_users mailing list >>> >>>[email protected] >>> >>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> >>> This message was sent to JEAN VELEZ at [email protected] >>> >>> To unsubscribe, send an email to >>>[email protected] >> >>-- >>null >>-------------- next part -------------- >>An HTML attachment was scrubbed... >>URL: >>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/5db1d60c/attachment-0001.html >> >>------------------------------ >> >>Message: 14 >>Date: Sun, 23 Aug 2020 20:48:29 -0500 >>From: Chuck Hast <[email protected]> >>Subject: Re: [chirp_users] ICOM 5100 >>To: Discussion of CHIRP <[email protected]> >>Message-ID: >> <can9xdp96p7tcsfeza3qubsxkumn8hmghunz2kr4u+xrgjln...@mail.gmail.com> >>Content-Type: text/plain; charset="utf-8" >> >>I would almost bet that we get the 5100a running the 4100a might >>come in on the same ticket, radio appears to be a subset of the >>5100a. >> >>On Sun, Aug 23, 2020 at 8:03 PM Jean C. Velez <[email protected]> wrote: >> >>> What about for ID4100a? >>> >>> On Sun, Aug 23, 2020 at 20:03 Chuck Hast <[email protected]> wrote: >>> >>>> I have asked the same question, I have even offered the use of my radio >>>> to test it, sure >>>> would be nice to get the 5100A in under Chirp. >>>> >>>> >>>> On Sun, Aug 23, 2020 at 2:33 PM Tim Fitch <[email protected]> wrote: >>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Will Icom 5100A ever be added to the list of supported radios to be >>>>> programmed by CHIRP? Or is there a work around so that you can program >>>>> it? >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Sent from >>>>> >>>>> Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> >>>>> >>>>> chirp_users mailing list >>>>> >>>>> >>>>>[email protected] >>>>> >>>>> >>>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>>>> >>>>> >>>>> This message was sent to Chuck Hast at [email protected] >>>>> >>>>> >>>>> To unsubscribe, send an email to >>>>>[email protected] >>>> >>>> >>>> >>>> -- >>>> Chirp + Editcp + MD380Tools on Linux >>>> Celestial!!! >>>> Chuck -- KP4DJT >>>> >>>> >>>> _______________________________________________ >>>> >>>> chirp_users mailing list >>>> >>>>[email protected] >>>> >>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>>> >>>> This message was sent to JEAN VELEZ at [email protected] >>>> >>>> To unsubscribe, send an email to >>>>[email protected] >>> >>> -- >>> null >>> _______________________________________________ >>> chirp_users mailing list >>>[email protected] >>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Chuck Hast at [email protected] >>> To unsubscribe, send an email to >>>[email protected] >> >> >> >>-- >>Chirp + Editcp + MD380Tools on Linux >>Celestial!!! >>Chuck -- KP4DJT >>-------------- next part -------------- >>An HTML attachment was scrubbed... >>URL: >>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/2d94dd5e/attachment-0001.html >> >>------------------------------ >> >>Message: 15 >>Date: Sun, 23 Aug 2020 21:15:32 -0700 >>From: Jeremiah Williams <[email protected]> >>Subject: [chirp_users] Baofeng UV-9r plus cable issues >>To: [email protected] >>Message-ID: <[email protected]> >>Content-Type: text/plain; charset=utf-8 >> >>My Baofeng cable is a ch340. I says error when I try to upload my radio. Any >>suggestions? Or do I need a different cable? >>I?ve already tried all the things google info has. Download prolific etc... >> >>Jeremiah W. >> >> >>------------------------------ >> >>Message: 16 >>Date: Sun, 23 Aug 2020 22:02:18 -0700 >>From: Jardy <[email protected]> >>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues >>To: Jeremiah Williams <[email protected]>, Discussion of CHIRP >> <[email protected]> >>Message-ID: <[email protected]> >>Content-Type: text/plain; charset="utf-8" >> >>Make sure you try to download from the radio before you write to the radio. >> >>Jardy Dawson WA7JRD >> >>Message sent by....Oh look!! Pretty lights!! >> >> >>> On Aug 23, 2020, at 21:16, Jeremiah Williams via chirp_users >>> <[email protected]> wrote: >>> >>> ?My Baofeng cable is a ch340. I says error when I try to upload my radio. >>> Any suggestions? Or do I need a different cable? >>> I?ve already tried all the things google info has. Download prolific >>> etc... >>> >>> Jeremiah W. >>> _______________________________________________ >>> chirp_users mailing list >>>[email protected] >>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Jardy at [email protected] >>> To unsubscribe, send an email to >>> [email protected] >>-------------- next part -------------- >>An HTML attachment was scrubbed... >>URL: >>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/baa0da3c/attachment-0001.html >> >>------------------------------ >> >>Message: 17 >>Date: Mon, 24 Aug 2020 00:41:13 -0500 >>From: W Paul Mills <[email protected]> >>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues >>To: Jeremiah Williams via chirp_users >> <[email protected]> >>Message-ID: <[email protected]> >>Content-Type: text/plain; charset=utf-8; format=flowed >> >>Prolific driver is _NOT_ for use with a CH340 chip. >> >>Are you sure you are using the right COM port. What operating system are >>you using? What is the exact error? >> >>On 8/23/20 11:15 PM, Jeremiah Williams via chirp_users wrote: >>> My Baofeng cable is a ch340. I says error when I try to upload my radio. >>> Any suggestions? Or do I need a different cable? >>> I?ve already tried all the things google info has. Download prolific >>> etc... >>> >>> Jeremiah W. >>> _______________________________________________ >>> chirp_users mailing list >>>[email protected] >>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Paul AC0HY at [email protected] >>> To unsubscribe, send an email to >>> [email protected] >> >> >>-- >>/************************************************** >>* Amateur Radio Station AC0HY * >>* W. Paul Mills SN807 * >>* Assistant EC Alpha-1 ARES Shawnee/Wabaunsee, KS * >>* President Kaw Valley Amateur Radio Club * >>**************************************************/ >> >> >> >>------------------------------ >> >>Message: 18 >>Date: Mon, 24 Aug 2020 07:05:47 -0400 >>From: Jim Unroe <[email protected]> >>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues >>To: Jeremiah Williams <[email protected]>, Discussion of CHIRP >> <[email protected]> >>Message-ID: >> <CADnO8U7rG53c7-eVo1Wpc9=sjhhuh+qcb6oyrlrt9bjybep...@mail.gmail.com> >>Content-Type: text/plain; charset="UTF-8" >> >>On Mon, Aug 24, 2020 at 12:17 AM Jeremiah Williams via chirp_users >><[email protected]> wrote: >>> >>> My Baofeng cable is a ch340. I says error when I try to upload my radio. >>> Any suggestions? Or do I need a different cable? >>> I?ve already tried all the things google info has. Download prolific >>> etc... >>> >>> Jeremiah W. >> >>What is the exact error (or better yet, attach a debug.log file)? >> >>Jim KC9HI >> >> >>------------------------------ >> >>Message: 19 >>Date: Mon, 24 Aug 2020 07:52:47 -0400 >>From: Jim Unroe <[email protected]> >>Subject: Re: [chirp_users] transferring channels from one radio >> manuf.to another >>To: robert moore <[email protected]>, Discussion of CHIRP >> <[email protected]> >>Message-ID: >> <cadno8u7vs_vyaones3zmjhgqb1qd1ytd4bsktuysffg1a+v...@mail.gmail.com> >>Content-Type: text/plain; charset="UTF-8" >> >>On Sun, Aug 23, 2020 at 2:56 PM robert moore via chirp_users >><[email protected]> wrote: >>> >>> Hello all, >>> I have been using chirp for a few years now to program my baofeng UV-5R >>> handhelds.I have just picked up a new Leixen VV-898. All of the channels >>> and settings on my Baofeng are the exact same ones that i want to program >>> in to my new Leixen. Is there a way to transfer the information from the >>> Baofeng to the Leixen using chirp? thanks >>> >>> Robert/ KM4ORN >> >>Robert, >> >>The first thing you need to do is to make sure CHIRP can even program >>your VV-898. Leixen has changed the radio since the original CHIRP >>support was created and may have broken it (according to some open >>issues). >> >>If CHIRP does program your VV-898 OK, then all you need to do is >>import a saved CHIRP Radio Images (*.img) file from your UV-5R into a >>tab from your VV-898. I use a UV-5R image as the master from >>programming all of my CHIRP supported dual-band radios. A more >>detailed explanation can be found here. >> >>https://baofengtech.com/CHIRPImport >> >>Jim KC9HI >> >> >>------------------------------ >> >>Message: 20 >>Date: Mon, 24 Aug 2020 12:04:32 +0000 (UTC) >>From: richard ward <[email protected]> >>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues >>To: Discussion of CHIRP <[email protected]> >>Message-ID: <[email protected]> >>Content-Type: text/plain; charset="utf-8" >> >> Yes you do have to upload whats already in the Radio even if youve set it >> to default to clear all IE the chinese channels? you can start a fresh page >> before your download withinin chirp? the download button will be available >> i/e more lit up when youve done that then cilck on the channels you want to >> download good luck >> On Monday, 24 August 2020, 12:08:49 BST, Jim Unroe >> <[email protected]> wrote: >> >> On Mon, Aug 24, 2020 at 12:17 AM Jeremiah Williams via chirp_users >><[email protected]> wrote: >>> >>> My Baofeng cable is a ch340. I says error when I try to upload my radio. >>> Any suggestions? Or do I need a different cable? >>> I?ve already tried all the things google info has. Download prolific >>> etc... >>> >>> Jeremiah W. >> >>What is the exact error (or better yet, attach a debug.log file)? >> >>Jim KC9HI >>_______________________________________________ >>chirp_users mailing list >>[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>This message was sent to rich at [email protected] >>To unsubscribe, send an email to >>[email protected] >>-------------- next part -------------- >>An HTML attachment was scrubbed... >>URL: >>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/f98e36be/attachment-0001.html >> >>------------------------------ >> >>Message: 21 >>Date: Mon, 24 Aug 2020 06:03:54 -0700 >>From: Jeremiah Williams <[email protected]> >>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues >>To: Jim Unroe <[email protected]> >>Cc: Discussion of CHIRP <[email protected]> >>Message-ID: <[email protected]> >>Content-Type: text/plain; charset=utf-8 >> >>Thank you all for your help. The message error says ?radio did not respond ?, >>but my radio light turn on and it starts to talk. >> >> >>Jeremiah W. >> >>> On Aug 24, 2020, at 4:05 AM, Jim Unroe <[email protected]> wrote: >>> >>> On Mon, Aug 24, 2020 at 12:17 AM Jeremiah Williams via chirp_users >>> <[email protected]> wrote: >>>> >>>> My Baofeng cable is a ch340. I says error when I try to upload my radio. >>>> Any suggestions? Or do I need a different cable? >>>> I?ve already tried all the things google info has. Download prolific >>>> etc... >>>> >>>> Jeremiah W. >>> >>> What is the exact error (or better yet, attach a debug.log file)? >>> >>> Jim KC9HI >> >> >> >>------------------------------ >> >>Message: 22 >>Date: Mon, 24 Aug 2020 13:26:33 -0400 >>From: "John La" <[email protected]> >>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues >>To: "'Jeremiah Williams'" <[email protected]>, "'Discussion of >> CHIRP'" <[email protected]> >>Message-ID: <[email protected]> >>Content-Type: text/plain; charset="UTF-8" >> >>Here is a list of Common Error Messages >> >>www.Miklor.com/COM/UV_ErrorMess.php >> >>Stay safe and Stay healthy. >>John K3NXU >> >> >>-----Original Message----- >>From: [email protected] >>[mailto:[email protected]] On Behalf Of Jeremiah >>Williams via chirp_users >>Sent: Monday, August 24, 2020 9:04 AM >>To: Jim Unroe >>Cc: Discussion of CHIRP >>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues >> >>Thank you all for your help. The message error says ?radio did not respond ?, >>but my radio light turn on and it starts to talk. >> >> >>Jeremiah W. >> >>> On Aug 24, 2020, at 4:05 AM, Jim Unroe <[email protected]> wrote: >>> >>> On Mon, Aug 24, 2020 at 12:17 AM Jeremiah Williams via chirp_users >>> <[email protected]> wrote: >>>> >>>> My Baofeng cable is a ch340. I says error when I try to upload my radio. >>>> Any suggestions? Or do I need a different cable? >>>> I?ve already tried all the things google info has. Download prolific >>>> etc... >>>> >>>> Jeremiah W. >>> >>> What is the exact error (or better yet, attach a debug.log file)? >>> >>> Jim KC9HI >> >>_______________________________________________ >>chirp_users mailing list >>[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>This message was sent to John LaMartina at [email protected] >>To unsubscribe, send an email to >>[email protected] >> >> >> >>------------------------------ >> >>_______________________________________________ >>chirp_users mailing list >>[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>To unsubscribe, send an email to >>[email protected] >> >>End of chirp_users Digest, Vol 140, Issue 10 >>******************************************** > > > >------------------------------ > >Message: 3 >Date: Mon, 24 Aug 2020 17:13:39 -0400 (EDT) >From: "Nigel A. Gunn G8IFF/W8IFF" <[email protected]> >Subject: Re: [chirp_users] chirp_users Digest, Vol 140, Issue 10 >To: Discussion of CHIRP <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset=UTF-8 > >It worked until Radio Reference changed something in it's database. >Radio Reference now wants you to have a paid account to download data. >Chirp doesn't cater for paid accounts. > > >> On 24 August 2020 at 16:02 Tommy Long <[email protected]> wrote: >> >> >> Do you ever think they will fix them to download radio reference ? >> >1, e-mail [email protected] www http://www.ngunn.net > > >------------------------------ > >Message: 4 >Date: Mon, 24 Aug 2020 17:28:00 -0700 (MST) >From: Charles Gierke <[email protected]> >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >To: Discussion of CHIRP <[email protected]>, Don > Goodrich <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset="utf-8" > >Tried beveling the edges, no change. Thanks > > >> On August 23, 2020 at 3:08 PM Don Goodrich <[email protected]> >> wrote: >> >> 1st the volume level has no effect on data transfer... >> >> Sometimes a little plastic shaving is needed. Shave carefuly a little >> off the plastic shroud around the cable male connector where it plugs into >> the radio as it interferes with the radio's case prventing the connector >> from solidly seating. This may be the issue here... >> >> Don Goodrich >>[email protected] >> AF7DG >> >> >> >> >> Sent: Sunday, August 23, 2020 at 2:55 PM >> From: "Charles Gierke" <[email protected]> >> To: "Discussion of CHIRP" <[email protected]>, "Alan >> Hill" <[email protected]> >> Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >> >> NO luck yet. I held the plug in as far as it would go, no change. I >> turned the volume up all the way, no luck. I closed CHIRP and re-opened as >> Administrator,still no luck up or downloading. >> >> thanks for your assistance >> >> >> > > On August 22, 2020 at 4:11 PM Alan Hill >> <[email protected]> wrote: >> > >> > Try making sure you vigorously plug the connector into the >> radio and hold it in while loading from chirp. Also turn the volume up from >> minimum. Last resort run chirp as adminstrator. >> > >> > >> > On Sat, Aug 22, 2020, 3:45 PM Charles Gierke < [email protected] >> mailto:[email protected] > wrote: >> > >> > > > > >> > > On Wednesday my 2 BaoFeng UV 5R radios could download and >> upload to CHIRP. >> > > >> > > On Friday all I got was the following message: Radio Did >> Not Respond. >> > > >> > > I tried reloading the latest version of CHIRP, no change. >> I tried an earlier version of CHIRP, no change. I reloaded the latest >> version back, no change. Visually the radio's red light blinks then the LED >> display blinks then the error message shows up on CHIRP. >> > > >> > > >> > > >> > > Any suggestions? >> > > >> > > Thanks Chuck KJ7INT >> > > >> > > _______________________________________________ >> > > chirp_users mailing list >> > > [email protected] >> mailto:[email protected] >> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> > > This message was sent to Silver Fox at >> [email protected] mailto:[email protected] >> > > To unsubscribe, send an email to >> [email protected] >> mailto:[email protected] >> > > >> > > > > _______________________________________________ >> > chirp_users mailing list >> > [email protected] >> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> > This message was sent to Chuck at [email protected] >> > To unsubscribe, send an email to >> [email protected] >> > >> > > _______________________________________________ >> chirp_users mailing list >> [email protected]http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Don Goodrich at [email protected] To >> unsubscribe, send an email to [email protected] >> >> > > >> _______________________________________________ chirp_users mailing list >> [email protected]http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Chuck at [email protected] To unsubscribe, send an >> email to [email protected] >> > >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/4819e90e/attachment-0001.html > >------------------------------ > >Message: 5 >Date: Mon, 24 Aug 2020 17:30:10 -0700 (MST) >From: Charles Gierke <[email protected]> >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >To: Discussion of CHIRP <[email protected]>, "Nigel > A. Gunn G8IFF/W8IFF" <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset="utf-8" > >Scottsdale AZ. > > >> On August 23, 2020 at 3:29 PM "Nigel A. Gunn G8IFF/W8IFF" <[email protected]> >> wrote: >> >> Might help if we knew where you were located. >> >> >> > > On 23 August 2020 at 18:04 Charles Gierke <[email protected]> >> wrote: >> > >> > hi, still no luck. >> > I went to the web site and put a death-grip on the plug and held >> it in as far as it would go. I trimmed a hair of the edges of the plug to >> let it seat on the bottom. >> > >> > thanks for the suggestions >> > >> > >> > > > > On August 22, 2020 at 5:55 PM John LaMartina >> <[email protected]> wrote: >> > > >> > > This may assist. >> > > Www.Miklor.com/COM/UV_ErrorMess.php >> > > >> > > John >> > > Www.Miklor.com/UV5R >> > > >> > > >> > > >> > > > > > > On Aug 22, 2020, at 6:45 PM, Charles Gierke >> <[email protected]> wrote: >> > > > >> > > > >> > > > > > > >> > > > > > > >> > > > On Wednesday my 2 BaoFeng UV 5R radios could download >> and upload to CHIRP. >> > > > >> > > > On Friday all I got was the following message: Radio >> Did Not Respond. >> > > > >> > > > I tried reloading the latest version of CHIRP, no >> change. I tried an earlier version of CHIRP, no change. I reloaded the >> latest version back, no change. Visually the radio's red light blinks then >> the LED display blinks then the error message shows up on CHIRP. >> > > > >> > > > >> > > > Any suggestions? >> > > > >> > > > Thanks Chuck KJ7INT >> > > > >> > > > _______________________________________________ >> > > > chirp_users mailing list >> > > > [email protected] >> > > > >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> > > > This message was sent to John LaMartina at >> [email protected] >> > > > To unsubscribe, send an email to >> [email protected] >> > > > >> > > > > > > >> > > > > >> > >> > > > > _______________________________________________ >> > > chirp_users mailing list >> > > [email protected] >> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> > > This message was sent to Chuck at [email protected] >> > > To unsubscribe, send an email to >> [email protected] >> > > >> > > > > _______________________________________________ >> chirp_users mailing list >> [email protected]http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Nigel Gunn, W8IFF at [email protected] To >> unsubscribe, send an email to [email protected] >> > >> > > >> >> >> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 >> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] www >> http://www.ngunn.net >> >> > > >> _______________________________________________ >> chirp_users mailing list >>[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Chuck at [email protected] >> To unsubscribe, send an email to >> [email protected] >> > >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/9787e285/attachment-0001.html > >------------------------------ > >Message: 6 >Date: Mon, 24 Aug 2020 17:43:08 -0700 (MST) >From: Charles Gierke <[email protected]> >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >To: Discussion of CHIRP <[email protected]>, > Silverfox <[email protected]>, John LaMartina <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset="utf-8" > >thanks for the suggestion. Unfortunately, no luck. > >Chuck > > >> On August 23, 2020 at 4:26 PM Silverfox <[email protected]> wrote: >> >> >> I forgot that you are on Windows. The windows OS is very poor >> supporting USB. You might try going into the device manager and tell it to >> show hidden devices. Once that is done, look at the USB entries and delete >> all of them that are diminished icons. That is, they are lighter than the >> other icons. >> >> Good luck. >> >> Alan >> >> >> >> From: [email protected] >> [mailto:[email protected]] On Behalf Of Charles >> Gierke >> Sent: Sunday, August 23, 2020 3:05 PM >> To: Discussion of CHIRP; John LaMartina >> Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >> >> >> >> hi, still no luck. >> I went to the web site and put a death-grip on the plug and held it in >> as far as it would go. I trimmed a hair of the edges of the plug to let it >> seat on the bottom. >> >> thanks for the suggestions >> >> <br<![endif] --> </br<![endif]> >> >> On August 22, 2020 at 5:55 PM John LaMartina <[email protected]> wrote: >> >> This may assist. >> >>Www.Miklor.com/COM/UV_ErrorMess.php >> >> >> >> John >> >>Www.Miklor.com/UV5R >> >> >> >> >> <br<![endif] --> </br<![endif]> >> >> On Aug 22, 2020, at 6:45 PM, Charles Gierke <[email protected]> wrote: >> >> > > >> > ? >> > >> > On Wednesday my 2 BaoFeng UV 5R radios could download and upload >> to CHIRP. >> > >> > On Friday all I got was the following message: Radio Did Not >> Respond. >> > >> > I tried reloading the latest version of CHIRP, no change. I >> tried an earlier version of CHIRP, no change. I reloaded the latest version >> back, no change. Visually the radio's red light blinks then the LED display >> blinks then the error message shows up on CHIRP. >> > >> > >> > >> > Any suggestions? >> > >> > Thanks Chuck KJ7INT >> > >> > _______________________________________________ >> > chirp_users mailing list >> > [email protected] >> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> > This message was sent to John LaMartina at [email protected] >> > To unsubscribe, send an email to >> [email protected] >> > >> > > >> >> >> >> _______________________________________________ >> chirp_users mailing list >>[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Chuck at [email protected] >> To unsubscribe, send an email to >> [email protected] >> >> >> >> > > >> _______________________________________________ >> chirp_users mailing list >>[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Chuck at [email protected] >> To unsubscribe, send an email to >> [email protected] >> > >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/04ed9a31/attachment-0001.html > >------------------------------ > >Message: 7 >Date: Mon, 24 Aug 2020 19:48:26 -0500 >From: "Glenn K0LNY" <[email protected]> >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >To: "Discussion of CHIRP" <[email protected]> >Message-ID: <176201d67a79$71e43120$7001a8c0@NUCPPYH> >Content-Type: text/plain; charset="utf-8" > >Chuck, >Have you tried the following? >open device manager, and seeing which com ports show, and then unplug the >cable, and see which one disappears, so you can select that port in Chirp. >HTH. > >Glenn > >----- Original Message ----- >From: Charles Gierke >To: Discussion of CHIRP ; Silverfox ; John LaMartina >Sent: Monday, August 24, 2020 7:43 PM >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating > > >thanks for the suggestion. Unfortunately, no luck. > >Chuck > > > On August 23, 2020 at 4:26 PM Silverfox <[email protected]> wrote: > > > I forgot that you are on Windows. The windows OS is very poor supporting > USB. You might try going into the device manager and tell it to show hidden > devices. Once that is done, look at the USB entries and delete all of them > that are diminished icons. That is, they are lighter than the other icons. > > Good luck. > > Alan > > > > From: [email protected] > [mailto:[email protected]] On Behalf Of Charles > Gierke > Sent: Sunday, August 23, 2020 3:05 PM > To: Discussion of CHIRP; John LaMartina > Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating > > > > hi, still no luck. > I went to the web site and put a death-grip on the plug and held it in as > far as it would go. I trimmed a hair of the edges of the plug to let it seat > on the bottom. > > thanks for the suggestions > > <!--[endif]--> > > On August 22, 2020 at 5:55 PM John LaMartina <[email protected]> wrote: > > This may assist. > >Www.Miklor.com/COM/UV_ErrorMess.php > > > > John > >Www.Miklor.com/UV5R > > > > > <!--[endif]--> > > On Aug 22, 2020, at 6:45 PM, Charles Gierke <[email protected]> wrote: > > ? > > On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP. > > On Friday all I got was the following message: Radio Did Not Respond. > > I tried reloading the latest version of CHIRP, no change. I tried an > earlier version of CHIRP, no change. I reloaded the latest version back, no > change. Visually the radio's red light blinks then the LED display blinks > then the error message shows up on CHIRP. > > > > Any suggestions? > > Thanks Chuck KJ7INT > > _______________________________________________ > chirp_users mailing list >[email protected] >http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to John LaMartina at [email protected] > To unsubscribe, send an email to > [email protected] > > > > > _______________________________________________ > chirp_users mailing list >[email protected] >http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Chuck at [email protected] > To unsubscribe, send an email to > [email protected] > > > > > > > _______________________________________________ > chirp_users mailing list >[email protected] >http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Chuck at [email protected] > To unsubscribe, send an email to > [email protected] > > > > >-------------------------------------------------------------------------------- > > >_______________________________________________ >chirp_users mailing list >[email protected] >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to Glenn at [email protected] >To unsubscribe, send an email to [email protected] >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/f5d7164f/attachment-0001.html > >------------------------------ > >Message: 8 >Date: Mon, 24 Aug 2020 17:57:44 -0700 (MST) >From: Charles Gierke <[email protected]> >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >To: Discussion of CHIRP <[email protected]>, Glenn > K0LNY <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset="utf-8" > >Opened Device Manager, Ports (COM & LPT) "USB-SERIAL CH340(COM3)" >I've always used COM 3 and it worked fine until last Wednesday. >? > >> On August 24, 2020 at 5:48 PM Glenn K0LNY <[email protected]> wrote: >> >> Chuck, >> Have you tried the following? >> open device manager, and seeing which com ports show, and then unplug >> the cable, and see which one disappears, so you can select that port in >> Chirp. >> HTH. >> >> Glenn >> >> ----- Original Message ----- >> From: Charles Gierke mailto:[email protected] >> To: Discussion of CHIRP mailto:[email protected] ; >> Silverfox mailto:[email protected] ; John LaMartina mailto:[email protected] >> Sent: Monday, August 24, 2020 7:43 PM >> Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >> >> thanks for the suggestion. Unfortunately, no luck. >> >> Chuck >> >> >> > > On August 23, 2020 at 4:26 PM Silverfox < [email protected] >> mailto:[email protected] > wrote: >> > >> > >> > I forgot that you are on Windows. The windows OS is very poor >> supporting USB. You might try going into the device manager and tell it to >> show hidden devices. Once that is done, look at the USB entries and delete >> all of them that are diminished icons. That is, they are lighter than the >> other icons. >> > >> > Good luck. >> > >> > Alan >> > >> > >> > >> > From: [email protected] >> mailto:[email protected] >> [mailto:[email protected]] On Behalf Of Charles >> Gierke >> > Sent: Sunday, August 23, 2020 3:05 PM >> > To: Discussion of CHIRP; John LaMartina >> > Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not >> communicating >> > >> > >> > >> > hi, still no luck. >> > I went to the web site and put a death-grip on the plug and held >> it in as far as it would go. I trimmed a hair of the edges of the plug to >> let it seat on the bottom. >> > >> > thanks for the suggestions >> > >> > <!--[endif]--> >> > >> > On August 22, 2020 at 5:55 PM John LaMartina <[email protected]> >> wrote: >> > >> > This may assist. >> > >> > Www.Miklor.com/COM/UV_ErrorMess.php >> > >> > >> > >> > John >> > >> > Www.Miklor.com/UV5R >> > >> > >> > >> > >> > <!--[endif]--> >> > >> > On Aug 22, 2020, at 6:45 PM, Charles Gierke <[email protected]> >> wrote: >> > >> > > > > >> > > ? >> > > >> > > On Wednesday my 2 BaoFeng UV 5R radios could download and >> upload to CHIRP. >> > > >> > > On Friday all I got was the following message: Radio Did >> Not Respond. >> > > >> > > I tried reloading the latest version of CHIRP, no change. >> I tried an earlier version of CHIRP, no change. I reloaded the latest >> version back, no change. Visually the radio's red light blinks then the LED >> display blinks then the error message shows up on CHIRP. >> > > >> > > >> > > >> > > Any suggestions? >> > > >> > > Thanks Chuck KJ7INT >> > > >> > > _______________________________________________ >> > > chirp_users mailing list >> > > [email protected] >> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> > > This message was sent to John LaMartina at [email protected] >> > > To unsubscribe, send an email to >> [email protected] >> > > >> > > > > >> > >> > >> > >> > _______________________________________________ >> > chirp_users mailing list >> > [email protected] >> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> > This message was sent to Chuck at [email protected] >> > To unsubscribe, send an email to >> [email protected] >> > >> > >> > >> > >> > > >> >> > > _______________________________________________ >> > chirp_users mailing list >> > [email protected] >> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> > This message was sent to Chuck at [email protected] >> > To unsubscribe, send an email to >> [email protected] >> > >> > > >> >> >> --------------------------------------------- >> >> _______________________________________________ >> chirp_users mailing list >>[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Glenn at [email protected] >> To unsubscribe, send an email to >> [email protected] >> > > >> _______________________________________________ >> chirp_users mailing list >>[email protected] >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Chuck at [email protected] >> To unsubscribe, send an email to >> [email protected] >> > >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/53073a9d/attachment-0001.html > >------------------------------ > >Message: 9 >Date: Mon, 24 Aug 2020 18:09:00 -0700 >From: "Peter J. McClosky" <[email protected]> >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >To: Discussion of CHIRP <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset="utf-8" > >Hello, > >I have programed well over a hundred UV-5x radios and have had both easy and >hard times programing them. > >One thing that I learned is to slow down, waiting about 10 seconds between >actions taken on the computer. This solve most of the error problems. > >If that does not work, most of the rest to the time ,it is solved by pushing >the programing cable into the radio and keep pressure on the cable until the >pride is programed. I have to push it VERY hard. > >On a windows machines you have to select the right com port (I am mostly a mac >person so I find the right port by trial and error). > >As an aside, using more that 60 cables to program the radios, I have only >found one cable that was defective, so that is most likely, not the problem. >----- >Peter J. McClosky, N7IY >Eugene, Oregon >[email protected] >[email protected] >http://home.earthlink.net/~pmcclosky/ > >> On Aug 24, 2020, at 5:43 PM, Charles Gierke <[email protected]> wrote: >> >> thanks for the suggestion. Unfortunately, no luck. >> >> Chuck >> >>> On August 23, 2020 at 4:26 PM Silverfox <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> I forgot that you are on Windows. The windows OS is very poor supporting >>> USB. You might try going into the device manager and tell it to show >>> hidden devices. Once that is done, look at the USB entries and delete all >>> of them that are diminished icons. That is, they are lighter than the >>> other icons. >>> Good luck. >>> Alan >>> >>> From: [email protected] >>> <mailto:[email protected]> >>> [mailto:[email protected] >>> <mailto:[email protected]>] On Behalf Of Charles >>> Gierke >>> Sent: Sunday, August 23, 2020 3:05 PM >>> To: Discussion of CHIRP; John LaMartina >>> Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >>> >>> hi, still no luck. >>> I went to the web site and put a death-grip on the plug and held it in as >>> far as it would go. I trimmed a hair of the edges of the plug to let it >>> seat on the bottom. >>> >>> thanks for the suggestions >>> >>> >>> >>> On August 22, 2020 at 5:55 PM John LaMartina <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> This may assist. >>>Www.Miklor.com/COM/UV_ErrorMess.php >>><http://www.miklor.com/COM/UV_ErrorMess.php> >>> >>> John >>>Www.Miklor.com/UV5R <http://www.miklor.com/UV5R> >>> >>> >>> >>> >>> On Aug 22, 2020, at 6:45 PM, Charles Gierke <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> ? >>> On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP. >>> >>> On Friday all I got was the following message: Radio Did Not Respond. >>> >>> I tried reloading the latest version of CHIRP, no change. I tried an >>> earlier version of CHIRP, no change. I reloaded the latest version back, no >>> change. Visually the radio's red light blinks then the LED display blinks >>> then the error message shows up on CHIRP. >>> >>> >>> Any suggestions? >>> >>> Thanks Chuck KJ7INT >>> >>> _______________________________________________ >>> chirp_users mailing list >>>[email protected] >>><mailto:[email protected]> >>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>><http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >>> This message was sent to John LaMartina at [email protected] >>> <mailto:[email protected]> >>> To unsubscribe, send an email to >>> [email protected] >>> <mailto:[email protected]> >>> >>> >>> _______________________________________________ >>> chirp_users mailing list >>>[email protected] >>><mailto:[email protected]> >>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>><http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >>> This message was sent to Chuck at [email protected] <mailto:[email protected]> >>> To unsubscribe, send an email to >>> [email protected] >>> <mailto:[email protected]> >>> >>> >> >> >>> >>> _______________________________________________ >>> chirp_users mailing list >>>[email protected] >>><mailto:[email protected]> >>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>><http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >>> This message was sent to Chuck at [email protected] <mailto:[email protected]> >>> To unsubscribe, send an email to >>> [email protected] >>> <mailto:[email protected]> >> _______________________________________________ >> chirp_users mailing list >>[email protected] <mailto:[email protected]> >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >><http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >> This message was sent to Peter at [email protected] >> <mailto:[email protected]> >> To unsubscribe, send an email to >> [email protected] >> <mailto:[email protected]> >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/7b34939d/attachment-0001.html > >------------------------------ > >Message: 10 >Date: Mon, 24 Aug 2020 21:09:34 -0400 (EDT) >From: "Nigel A. Gunn G8IFF/W8IFF" <[email protected]> >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >To: Discussion of CHIRP <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset="utf-8" > >Have you had a Windows update that has taken your CH340 driver out? Windows >has a habit of removing unsigned drivers. > > >> On 24 August 2020 at 20:57 Charles Gierke <[email protected]> wrote: >> >> Opened Device Manager, Ports (COM & LPT) "USB-SERIAL CH340(COM3)" >> I've always used COM 3 and it worked fine until last Wednesday. >> >> >> > > On August 24, 2020 at 5:48 PM Glenn K0LNY >> <[email protected]> wrote: >> > >> > Chuck, >> > Have you tried the following? >> > open device manager, and seeing which com ports show, and then >> unplug the cable, and see which one disappears, so you can select that port >> in Chirp. >> > HTH. >> > >> > Glenn >> > >> > ----- Original Message ----- >> > From: Charles Gierke mailto:[email protected] >> > To: Discussion of CHIRP mailto:[email protected] >> ; Silverfox mailto:[email protected] ; John LaMartina >> mailto:[email protected] >> > Sent: Monday, August 24, 2020 7:43 PM >> > Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not >> communicating >> > >> > thanks for the suggestion. Unfortunately, no luck. >> > >> > Chuck >> > >> > >> > > > > On August 23, 2020 at 4:26 PM Silverfox < >> [email protected] mailto:[email protected] > wrote: >> > > >> > > >> > > I forgot that you are on Windows. The windows OS is very >> poor supporting USB. You might try going into the device manager and tell >> it to show hidden devices. Once that is done, look at the USB entries and >> delete all of them that are diminished icons. That is, they are lighter >> than the other icons. >> > > >> > > Good luck. >> > > >> > > Alan >> > > >> > > >> > > From: [email protected] >> mailto:[email protected] >> [mailto:[email protected]] On Behalf Of Charles >> Gierke >> > > Sent: Sunday, August 23, 2020 3:05 PM >> > > To: Discussion of CHIRP; John LaMartina >> > > Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not >> communicating >> > > >> > > >> > > hi, still no luck. >> > > I went to the web site and put a death-grip on the plug and >> held it in as far as it would go. I trimmed a hair of the edges of the plug >> to let it seat on the bottom. >> > > >> > > thanks for the suggestions >> > > >> > > <!--[endif]--> >> > > >> > > On August 22, 2020 at 5:55 PM John LaMartina >> <[email protected]> wrote: >> > > >> > > This may assist. >> > > >> > > Www.Miklor.com/COM/UV_ErrorMess.php >> > > >> > > >> > > John >> > > >> > > Www.Miklor.com/UV5R >> > > >> > > >> > > >> > > <!--[endif]--> >> > > >> > > On Aug 22, 2020, at 6:45 PM, Charles Gierke >> <[email protected]> wrote: >> > > >> > > > > > > >> > > > >> > > > On Wednesday my 2 BaoFeng UV 5R radios could download >> and upload to CHIRP. >> > > > >> > > > On Friday all I got was the following message: Radio >> Did Not Respond. >> > > > >> > > > I tried reloading the latest version of CHIRP, no >> change. I tried an earlier version of CHIRP, no change. I reloaded the >> latest version back, no change. Visually the radio's red light blinks then >> the LED display blinks then the error message shows up on CHIRP. >> > > > >> > > > >> > > > Any suggestions? >> > > > >> > > > Thanks Chuck KJ7INT >> > > > >> > > > _______________________________________________ >> > > > chirp_users mailing list >> > > > [email protected] >> > > > >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> > > > This message was sent to John LaMartina at >> [email protected] >> > > > To unsubscribe, send an email to >> [email protected] >> > > > >> > > > > > > >> > > >> > > >> > > >> > > _______________________________________________ >> > > chirp_users mailing list >> > > [email protected] >> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> > > This message was sent to Chuck at [email protected] >> > > To unsubscribe, send an email to >> [email protected] >> > > >> > > >> > > >> > > >> > > > > >> > >> > > > > _______________________________________________ >> > > chirp_users mailing list >> > > [email protected] >> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> > > This message was sent to Chuck at [email protected] >> > > To unsubscribe, send an email to >> [email protected] >> > > >> > > > > >> > >> > >> > >> > --------------------------------------------- >> > >> > >> > _______________________________________________ >> > chirp_users mailing list >> > [email protected] >> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> > This message was sent to Glenn at [email protected] >> > To unsubscribe, send an email to >> [email protected] >> > >> > > >> >> > > _______________________________________________ >> > chirp_users mailing list >> > [email protected] >> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> > This message was sent to Chuck at [email protected] >> > To unsubscribe, send an email to >> [email protected] >> > >> > > _______________________________________________ chirp_users >> mailing list >> [email protected]http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Nigel Gunn, W8IFF at [email protected] To >> unsubscribe, send an email to [email protected] >> > > > >Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 >Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] www >http://www.ngunn.net >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/c101a07e/attachment-0001.html > >------------------------------ > >Message: 11 >Date: Mon, 24 Aug 2020 20:33:07 -0500 >From: Chuck Hast <[email protected]> >Subject: Re: [chirp_users] chirp_users Digest, Vol 140, Issue 10 >To: Discussion of CHIRP <[email protected]> >Message-ID: > <can9xdp_tszfsfvm+uydcs7e4q9wgkhj+ultizjibvkkydh_...@mail.gmail.com> >Content-Type: text/plain; charset="utf-8" > >On Mon, Aug 24, 2020 at 3:05 PM Tommy Long <[email protected]> wrote: > >> Do you ever think they will fix them to download radio reference ? >> >> Guys n gals, please please do not just blindly hit the send reply and >send your whole digest of message out. Sometimes you miss something >that got appended to the end of the digest and you have to dig down and >make sure nothing is lost. > >Celestial!!! >Chuck -- KP4DJT >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/7ba42fd0/attachment-0001.html > >------------------------------ > >Message: 12 >Date: Tue, 25 Aug 2020 09:14:46 -0700 >From: Ted Timmons <[email protected]> >Subject: [chirp_users] oddities (failures) finding/installing on > Ubuntu 20.04 >To: Discussion of CHIRP <[email protected]> >Message-ID: > <CAK7GBH-089mryCX=suaqyfrz6t1ixazya38-myqor0zhcht...@mail.gmail.com> >Content-Type: text/plain; charset="UTF-8" > >Hi, I have a x86 20.04 system, I can't find the PPA even after doing >apt-add-repository and similar steps. Roughly, I'd expect this to >return something: >$ apt search chirp > >or this to work: >$ apt install chirp-daily >E: Unable to locate package chirp-daily > >Are there known problems finding chirp-daily in the "focal" packages? >Here's a sample to back it up. > >$ lsb_release -a >Distributor ID: Ubuntu >Description: Ubuntu 20.04 LTS >Release: 20.04 >Codename: focal > >$ cat /etc/apt/sources.list.d/dansmith-ubuntu-chirp-snapshots-focal.list >deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu focal main ># deb-src http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu focal main >$ head -16 >/var/lib/apt/lists/ppa.launchpad.net_dansmith_chirp-snapshots_ubuntu_dists_focal_InRelease >-----BEGIN PGP SIGNED MESSAGE----- >Hash: SHA512 > >Origin: LP-PPA-dansmith-chirp-snapshots >Label: CHIRP Daily Snapshots >Suite: focal >Version: 20.04 >Codename: focal >Date: Fri, 07 Aug 2020 7:17:00 UTC >Architectures: amd64 arm64 armhf i386 ppc64el riscv64 s390x >Components: main >Description: Ubuntu Focal 20.04 >MD5Sum: >3f49c1f6dff8f224953b8a84efb0841e 135 main/binary-amd64/Release >8dc5aea5b03dff8595f096f9e368e888 32 main/binary-amd64/Packages.xz >fa9ac5a217b5547bc7dd4e6e894fe135 20 main/binary-amd64/Packages.gz >$ apt search chirp >Sorting... Done >Full Text Search... Done >coop-computing-tools/focal 7.0.22-1ubuntu1 amd64 >cooperative computing tools >$ apt search chirp-daily >Sorting... Done >Full Text Search... Done > >Thanks, >Ted > > >------------------------------ > >Message: 13 >Date: Tue, 25 Aug 2020 11:35:48 -0500 >From: Allen Roark <[email protected]> >Subject: Re: [chirp_users] oddities (failures) finding/installing on > Ubuntu 20.04 >To: Discussion of CHIRP <[email protected]> >Message-ID: > <cakqkkmnp27s+eu_cm5t3z_mc7do3u0mxcawn9hfqbuarqx9...@mail.gmail.com> >Content-Type: text/plain; charset="utf-8" > >Ted, > >I have a laptop with Windows 10 and a MacBook Air running the Catalina >OS. >I've downloaded the most currentI have a BaoFeng BF-F8HP. It is >currently >programmed with the Mississippi frequencies. I now live in Saint >Gabriel, >LA (just outside of Baton Rouge.) I am a SkyWarn Storm Spotter and Net >Control Operator (KD5GMC - General Class). With Hurricane Laura bearing >down on us, I need to get it up and running ASAP! > >Thanks, >Allen Roark >(225) 955-3365 > >On Tue, Aug 25, 2020 at 11:15 AM Ted Timmons <[email protected]> wrote: > > > Hi, I have a x86 20.04 system, I can't find the PPA even after doing > > apt-add-repository and similar steps. Roughly, I'd expect this to > > return something: > > $ apt search chirp > > > > or this to work: > > $ apt install chirp-daily > > E: Unable to locate package chirp-daily > > > > Are there known problems finding chirp-daily in the "focal" packages? > > Here's a sample to back it up. > > > > $ lsb_release -a > > Distributor ID: Ubuntu > > Description: Ubuntu 20.04 LTS > > Release: 20.04 > > Codename: focal > > > > $ cat >/etc/apt/sources.list.d/dansmith-ubuntu-chirp-snapshots-focal.list > > deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu focal >main > > # deb-src http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu >focal > > main > > $ head -16 > > >/var/lib/apt/lists/ppa.launchpad.net_dansmith_chirp-snapshots_ubuntu_dists_focal_InRelease > > -----BEGIN PGP SIGNED MESSAGE----- > > Hash: SHA512 > > > > Origin: LP-PPA-dansmith-chirp-snapshots > > Label: CHIRP Daily Snapshots > > Suite: focal > > Version: 20.04 > > Codename: focal > > Date: Fri, 07 Aug 2020 7:17:00 UTC > > Architectures: amd64 arm64 armhf i386 ppc64el riscv64 s390x > > Components: main > > Description: Ubuntu Focal 20.04 > > MD5Sum: > > 3f49c1f6dff8f224953b8a84efb0841e 135 > > main/binary-amd64/Release > > 8dc5aea5b03dff8595f096f9e368e888 32 > > main/binary-amd64/Packages.xz > > fa9ac5a217b5547bc7dd4e6e894fe135 20 > > main/binary-amd64/Packages.gz > > $ apt search chirp > > Sorting... Done > > Full Text Search... Done > > coop-computing-tools/focal 7.0.22-1ubuntu1 amd64 > > cooperative computing tools > > $ apt search chirp-daily > > Sorting... Done > > Full Text Search... Done > > > > Thanks, > > Ted > > _______________________________________________ > > chirp_users mailing list > > [email protected] > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Allen Roark at [email protected] > > To unsubscribe, send an email to > > [email protected] > > >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200825/50535776/attachment-0001.html > >------------------------------ > >Message: 14 >Date: Tue, 25 Aug 2020 11:45:52 -0500 >From: [email protected] >Subject: Re: [chirp_users] oddities (failures) finding/installing on > Ubuntu 20.04 >To: [email protected] >Message-ID: <[email protected]> >Content-Type: text/plain; charset=utf-8; format=flowed > >Ted; > >?? You will have to do some manual editing to install Chirp on a 20.04 >system. > >I hope this helps, > >You don't need to download Python 2.7 from the Python WEB page, or >download >the flatpak. >Its in Focals,(20.04)Repositories. > >These are all terminal commands, don't use the quotes. > >"sudo apt install python2"? will install 2.7 > >"ls -ls /usr/bin/python*"? will list your versions of python installed. >In my case 2.7 and 3.8 > >Add the Chirp repository: > >"sudo apt-add-repository ppa:dansmith/chirp-snapshots" > >Next Step from The Chirp WEB page: > >"sudo apt-get install chirp-daily" > >Returns an error. > >"E: Unable to locate package chirp-daily" > >In terminal, open your file manager as sudo. >I use Xubuntu, so I use "Sudo thunar" Your command will >match your desktop. > >Using mousepad, or text editor, >Edit, >"/etc/apt/sources.list.d/dansmith-ubuntu-chirp-snapshots-focal.list" > >Change: "deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu >focal main" >to: "deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu >bionic >main" > >"sudo apt update" >"sudo apt-get install chirp-daily" > >Another error: >"The following packages have unmet dependencies" And a list of 4 of >them. > >All http: commands are in your favorite browser. >All the other commands are at terminal. > >Download the first missing file: > >"https://packages.ubuntu.com/bionic/amd64/python-libxslt1/download"; > >"cd Downloads" > >"sudo dpkg -i python-libxslt1_1.1.29-5ubuntu0.2_amd64.deb" >Another error: >"sudo apt install -f" >"sudo apt-get install chirp-daily" > >Now we are down to 3 missing dependencies. > >Download the first from here: > >"https://packages.ubuntu.com/bionic/amd64/python-gtk2/download"; > >"sudo dpkg -i python-gtk2_2.24.0-5.1ubuntu2_amd64.deb" >"sudo apt install -f" >"sudo apt-get install chirp-daily" > >Down to 2 missing, getting closer. > > >Download the next one from here" > >"https://packages.ubuntu.com/bionic/all/python-serial/download"; >? "sudo dpkg -i python-serial_3.4-2_all.deb" > > >?There, now we are down to 1 missing: > >Download from here: > >"https://packages.ubuntu.com/bionic/all/python-suds/download"; >?"sudo dpkg -i python-suds_0.7~git20150727.94664dd-5_all.deb" > >Another error: > >"sudo apt install -f" > >"sudo apt-get install chirp-daily" > >It installed,? chirpw returns an error; >?"python-future" is missing. > >"https://packages.ubuntu.com/bionic/all/python-future/download"; > >"sudo dpkg -i python-future_0.15.2-4ubuntu2_all.deb" > > >Another dependency error: > >"sudo apt install -f" > >"chirpw"? its running. > > >On 8/25/20 11:14 AM, Ted Timmons wrote: > > > Hi, I have a x86 20.04 system, I can't find the PPA even after doing > > apt-add-repository and similar steps. Roughly, I'd expect this to > > return something: > > $ apt search chirp > > > > Thanks, > > Ted > > >------------------------------ > >Message: 15 >Date: Tue, 25 Aug 2020 12:02:03 -0500 >From: "Glenn K0LNY" <[email protected]> >Subject: Re: [chirp_users] oddities (failures) finding/installing on > Ubuntu 20.04 >To: "Discussion of CHIRP" <[email protected]> >Message-ID: <005501d67b01$756deb50$7001a8c0@NUCPPYH> >Content-Type: text/plain; charset="UTF-8" > >Are you kidding? >I've used Ubuntu since version 8, and often go to Ubuntu for certain >tasks, >because I am still a windows user, and I used DOS quite a bit back in >the >day, and still recall all the CLI commands of DOS. >But I use Linux for chirp for screenreader reasons, Chirp is >challenging in >windows with a screenreader. >But reading all this makes my head spin. >Even if the Linux CLI was my strength, I can't imagine doing all that. >I'd sooner install a live Linux that still uses the old repository for >use >with Chirp. >But to each their own, JMO. >BTW, Why aren't there scripts to do all that? > >Glenn >----- Original Message ----- >From: <[email protected]> >To: <[email protected]> >Sent: Tuesday, August 25, 2020 11:45 AM >Subject: Re: [chirp_users] oddities (failures) finding/installing on >Ubuntu >20.04 > > >Ted; > >You will have to do some manual editing to install Chirp on a 20.04 >system. > >I hope this helps, > >You don't need to download Python 2.7 from the Python WEB page, or >download >the flatpak. >Its in Focals,(20.04)Repositories. > >These are all terminal commands, don't use the quotes. > >"sudo apt install python2" will install 2.7 > >"ls -ls /usr/bin/python*" will list your versions of python installed. >In my case 2.7 and 3.8 > >Add the Chirp repository: > >"sudo apt-add-repository ppa:dansmith/chirp-snapshots" > >Next Step from The Chirp WEB page: > >"sudo apt-get install chirp-daily" > >Returns an error. > >"E: Unable to locate package chirp-daily" > >In terminal, open your file manager as sudo. >I use Xubuntu, so I use "Sudo thunar" Your command will >match your desktop. > >Using mousepad, or text editor, >Edit, >"/etc/apt/sources.list.d/dansmith-ubuntu-chirp-snapshots-focal.list" > >Change: "deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu >focal main" >to: "deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu >bionic >main" > >"sudo apt update" >"sudo apt-get install chirp-daily" > >Another error: >"The following packages have unmet dependencies" And a list of 4 of >them. > >All http: commands are in your favorite browser. >All the other commands are at terminal. > >Download the first missing file: > >"https://packages.ubuntu.com/bionic/amd64/python-libxslt1/download"; > >"cd Downloads" > >"sudo dpkg -i python-libxslt1_1.1.29-5ubuntu0.2_amd64.deb" >Another error: >"sudo apt install -f" >"sudo apt-get install chirp-daily" > >Now we are down to 3 missing dependencies. > >Download the first from here: > >"https://packages.ubuntu.com/bionic/amd64/python-gtk2/download"; > >"sudo dpkg -i python-gtk2_2.24.0-5.1ubuntu2_amd64.deb" >"sudo apt install -f" >"sudo apt-get install chirp-daily" > >Down to 2 missing, getting closer. > > >Download the next one from here" > >"https://packages.ubuntu.com/bionic/all/python-serial/download"; >"sudo dpkg -i python-serial_3.4-2_all.deb" > > >There, now we are down to 1 missing: > >Download from here: > >"https://packages.ubuntu.com/bionic/all/python-suds/download"; >"sudo dpkg -i python-suds_0.7~git20150727.94664dd-5_all.deb" > >Another error: > >"sudo apt install -f" > >"sudo apt-get install chirp-daily" > >It installed, chirpw returns an error; >"python-future" is missing. > >"https://packages.ubuntu.com/bionic/all/python-future/download"; > >"sudo dpkg -i python-future_0.15.2-4ubuntu2_all.deb" > > >Another dependency error: > >"sudo apt install -f" > >"chirpw" its running. > > >On 8/25/20 11:14 AM, Ted Timmons wrote: > > > Hi, I have a x86 20.04 system, I can't find the PPA even after doing > > apt-add-repository and similar steps. Roughly, I'd expect this to > > return something: > > $ apt search chirp > > > > Thanks, > > Ted >_______________________________________________ >chirp_users mailing list >[email protected] >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to Glenn at [email protected] >To unsubscribe, send an email to >[email protected] > > > >------------------------------ > >Message: 16 >Date: Tue, 25 Aug 2020 13:35:33 -0400 (EDT) >From: "Nigel A. Gunn G8IFF/W8IFF" <[email protected]> >Subject: Re: [chirp_users] oddities (failures) finding/installing on > Ubuntu 20.04 >To: Discussion of CHIRP <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset=UTF-8 > >It might not be in FOCAL. I always look in XENIAL for Chirp updates. > > > On 25/08/2020 12:14 Ted Timmons <[email protected]> wrote: > > > > > > Hi, I have a x86 20.04 system, I can't find the PPA even after doing > > apt-add-repository and similar steps. Roughly, I'd expect this to > > return something: > > $ apt search chirp > > > > or this to work: > > $ apt install chirp-daily > > E: Unable to locate package chirp-daily > > > > Are there known problems finding chirp-daily in the "focal" packages? > > Here's a sample to back it up. > > > > $ lsb_release -a > > Distributor ID: Ubuntu > > Description: Ubuntu 20.04 LTS > > Release: 20.04 > > Codename: focal > > > > $ cat >/etc/apt/sources.list.d/dansmith-ubuntu-chirp-snapshots-focal.list > > deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu focal >main > > # deb-src http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu >focal main > > $ head -16 >/var/lib/apt/lists/ppa.launchpad.net_dansmith_chirp-snapshots_ubuntu_dists_focal_InRelease > > -----BEGIN PGP SIGNED MESSAGE----- > > Hash: SHA512 > > > > Origin: LP-PPA-dansmith-chirp-snapshots > > Label: CHIRP Daily Snapshots > > Suite: focal > > Version: 20.04 > > Codename: focal > > Date: Fri, 07 Aug 2020 7:17:00 UTC > > Architectures: amd64 arm64 armhf i386 ppc64el riscv64 s390x > > Components: main > > Description: Ubuntu Focal 20.04 > > MD5Sum: > > 3f49c1f6dff8f224953b8a84efb0841e 135 main/binary-amd64/Release > > 8dc5aea5b03dff8595f096f9e368e888 32 main/binary-amd64/Packages.xz > > fa9ac5a217b5547bc7dd4e6e894fe135 20 main/binary-amd64/Packages.gz > > $ apt search chirp > > Sorting... Done > > Full Text Search... Done > > coop-computing-tools/focal 7.0.22-1ubuntu1 amd64 > > cooperative computing tools > > $ apt search chirp-daily > > Sorting... Done > > Full Text Search... Done > > > > Thanks, > > Ted > > _______________________________________________ > > chirp_users mailing list > > [email protected] > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Nigel Gunn, W8IFF at [email protected] > > To unsubscribe, send an email to >[email protected] > >Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 >Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] www >http://www.ngunn.net > > >------------------------------ > >Message: 17 >Date: Tue, 25 Aug 2020 17:37:59 +0000 >From: Tony Fuller <[email protected]> >Subject: Re: [chirp_users] oddities (failures) finding/installing on > Ubuntu 20.04 >To: Discussion of CHIRP <[email protected]> >Message-ID: > > <mn2pr10mb31048efb3e1f9750e533516aed...@mn2pr10mb3104.namprd10.prod.outlook.com> > >Content-Type: text/plain; charset="us-ascii" > >I'm still of the belief that it's easier to install flat pak and then >install the chirp flatpak package vs a number of command line >operations. > >The flatpak files get published next to the Windows I stalled and Mac >application. https://trac.chirp.danplanet.com/chirp_daily/LATEST/ > > >Tony. >________________________________ >From: [email protected] ><[email protected]> on behalf of Glenn K0LNY ><[email protected]> >Sent: Tuesday, August 25, 2020 12:02:03 PM >To: Discussion of CHIRP <[email protected]> >Subject: Re: [chirp_users] oddities (failures) finding/installing on >Ubuntu 20.04 > >Are you kidding? >I've used Ubuntu since version 8, and often go to Ubuntu for certain >tasks, >because I am still a windows user, and I used DOS quite a bit back in >the >day, and still recall all the CLI commands of DOS. >But I use Linux for chirp for screenreader reasons, Chirp is >challenging in >windows with a screenreader. >But reading all this makes my head spin. >Even if the Linux CLI was my strength, I can't imagine doing all that. >I'd sooner install a live Linux that still uses the old repository for >use >with Chirp. >But to each their own, JMO. >BTW, Why aren't there scripts to do all that? > >Glenn >----- Original Message ----- >From: <[email protected]> >To: <[email protected]> >Sent: Tuesday, August 25, 2020 11:45 AM >Subject: Re: [chirp_users] oddities (failures) finding/installing on >Ubuntu >20.04 > > >Ted; > >You will have to do some manual editing to install Chirp on a 20.04 >system. > >I hope this helps, > >You don't need to download Python 2.7 from the Python WEB page, or >download >the flatpak. >Its in Focals,(20.04)Repositories. > >These are all terminal commands, don't use the quotes. > >"sudo apt install python2" will install 2.7 > >"ls -ls /usr/bin/python*" will list your versions of python installed. >In my case 2.7 and 3.8 > >Add the Chirp repository: > >"sudo apt-add-repository ppa:dansmith/chirp-snapshots" > >Next Step from The Chirp WEB page: > >"sudo apt-get install chirp-daily" > >Returns an error. > >"E: Unable to locate package chirp-daily" > >In terminal, open your file manager as sudo. >I use Xubuntu, so I use "Sudo thunar" Your command will >match your desktop. > >Using mousepad, or text editor, >Edit, >"/etc/apt/sources.list.d/dansmith-ubuntu-chirp-snapshots-focal.list" > >Change: "deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu >focal main" >to: "deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu >bionic >main" > >"sudo apt update" >"sudo apt-get install chirp-daily" > >Another error: >"The following packages have unmet dependencies" And a list of 4 of >them. > >All http: commands are in your favorite browser. >All the other commands are at terminal. > >Download the first missing file: > >"https://packages.ubuntu.com/bionic/amd64/python-libxslt1/download"; > >"cd Downloads" > >"sudo dpkg -i python-libxslt1_1.1.29-5ubuntu0.2_amd64.deb" >Another error: >"sudo apt install -f" >"sudo apt-get install chirp-daily" > >Now we are down to 3 missing dependencies. > >Download the first from here: > >"https://packages.ubuntu.com/bionic/amd64/python-gtk2/download"; > >"sudo dpkg -i python-gtk2_2.24.0-5.1ubuntu2_amd64.deb" >"sudo apt install -f" >"sudo apt-get install chirp-daily" > >Down to 2 missing, getting closer. > > >Download the next one from here" > >"https://packages.ubuntu.com/bionic/all/python-serial/download"; >"sudo dpkg -i python-serial_3.4-2_all.deb" > > >There, now we are down to 1 missing: > >Download from here: > >"https://packages.ubuntu.com/bionic/all/python-suds/download"; >"sudo dpkg -i python-suds_0.7~git20150727.94664dd-5_all.deb" > >Another error: > >"sudo apt install -f" > >"sudo apt-get install chirp-daily" > >It installed, chirpw returns an error; >"python-future" is missing. > >"https://packages.ubuntu.com/bionic/all/python-future/download"; > >"sudo dpkg -i python-future_0.15.2-4ubuntu2_all.deb" > > >Another dependency error: > >"sudo apt install -f" > >"chirpw" its running. > > >On 8/25/20 11:14 AM, Ted Timmons wrote: > > > Hi, I have a x86 20.04 system, I can't find the PPA even after doing > > apt-add-repository and similar steps. Roughly, I'd expect this to > > return something: > > $ apt search chirp > > > > Thanks, > > Ted >_______________________________________________ >chirp_users mailing list >[email protected] >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to Glenn at [email protected] >To unsubscribe, send an email to >[email protected] > >_______________________________________________ >chirp_users mailing list >[email protected] >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to Tony F at [email protected] >To unsubscribe, send an email to >[email protected] >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200825/30eeb914/attachment-0001.html > >------------------------------ > >Message: 18 >Date: Tue, 25 Aug 2020 13:43:11 -0400 (EDT) >From: "Nigel A. Gunn G8IFF/W8IFF" <[email protected]> >Subject: Re: [chirp_users] oddities (failures) finding/installing on > Ubuntu 20.04 >To: Discussion of CHIRP <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset=UTF-8 > >The issue is that Ubuntu generates a new repository every 6 months with >each update. Most developers can't keep up with that and only keep up >the LTS repositories. > > > > > On 25/08/2020 13:02 Glenn K0LNY <[email protected]> wrote: > > > > > > Are you kidding? > > >------------------------------ > >Message: 19 >Date: Tue, 25 Aug 2020 10:51:33 -0700 >From: Ted Timmons <[email protected]> >Subject: Re: [chirp_users] oddities (failures) finding/installing on > Ubuntu 20.04 >To: Discussion of CHIRP <[email protected]> >Message-ID: > <CAK7GBH_jVCciazVdNAJNnXBCwjLVOq0=kns29pxu6xgif1d...@mail.gmail.com> >Content-Type: text/plain; charset="UTF-8" > >Aha, I thought some manual magic might be required. I "gave up" and >went the flatpak route instead like Tony said: > >apt install -y flatpak gnome-software-plugin-flatpak >flatpak remote-add --if-not-exists flathub >https://flathub.org/repo/flathub.flatpakrepo >flatpak install chirp-daily-20200807.flatpak > >It then starts fine with: >flatpak run com.danplanet.chirp > >I'm still working through serial/USB issues but I know how to handle >those, generally. > > >On Tue, Aug 25, 2020 at 9:47 AM <[email protected]> wrote: > > > > Ted; > > > > You will have to do some manual editing to install Chirp on a 20.04 > > system. > > > > I hope this helps, > > > > You don't need to download Python 2.7 from the Python WEB page, or >download > > the flatpak. > > Its in Focals,(20.04)Repositories. > > > > These are all terminal commands, don't use the quotes. > > > > "sudo apt install python2" will install 2.7 > > > > "ls -ls /usr/bin/python*" will list your versions of python >installed. > > In my case 2.7 and 3.8 > > > > Add the Chirp repository: > > > > "sudo apt-add-repository ppa:dansmith/chirp-snapshots" > > > > Next Step from The Chirp WEB page: > > > > "sudo apt-get install chirp-daily" > > > > Returns an error. > > > > "E: Unable to locate package chirp-daily" > > > > In terminal, open your file manager as sudo. > > I use Xubuntu, so I use "Sudo thunar" Your command will > > match your desktop. > > > > Using mousepad, or text editor, > > Edit, >"/etc/apt/sources.list.d/dansmith-ubuntu-chirp-snapshots-focal.list" > > > > Change: "deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu > > focal main" > > to: "deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu >bionic > > main" > > > > "sudo apt update" > > "sudo apt-get install chirp-daily" > > > > Another error: > > "The following packages have unmet dependencies" And a list of 4 of >them. > > > > All http: commands are in your favorite browser. > > All the other commands are at terminal. > > > > Download the first missing file: > > > > "https://packages.ubuntu.com/bionic/amd64/python-libxslt1/download"; > > > > "cd Downloads" > > > > "sudo dpkg -i python-libxslt1_1.1.29-5ubuntu0.2_amd64.deb" > > Another error: > > "sudo apt install -f" > > "sudo apt-get install chirp-daily" > > > > Now we are down to 3 missing dependencies. > > > > Download the first from here: > > > > "https://packages.ubuntu.com/bionic/amd64/python-gtk2/download"; > > > > "sudo dpkg -i python-gtk2_2.24.0-5.1ubuntu2_amd64.deb" > > "sudo apt install -f" > > "sudo apt-get install chirp-daily" > > > > Down to 2 missing, getting closer. > > > > > > Download the next one from here" > > > > "https://packages.ubuntu.com/bionic/all/python-serial/download"; > > "sudo dpkg -i python-serial_3.4-2_all.deb" > > > > > > There, now we are down to 1 missing: > > > > Download from here: > > > > "https://packages.ubuntu.com/bionic/all/python-suds/download"; > > "sudo dpkg -i python-suds_0.7~git20150727.94664dd-5_all.deb" > > > > Another error: > > > > "sudo apt install -f" > > > > "sudo apt-get install chirp-daily" > > > > It installed, chirpw returns an error; > > "python-future" is missing. > > > > "https://packages.ubuntu.com/bionic/all/python-future/download"; > > > > "sudo dpkg -i python-future_0.15.2-4ubuntu2_all.deb" > > > > > > Another dependency error: > > > > "sudo apt install -f" > > > > "chirpw" its running. > > > > > > On 8/25/20 11:14 AM, Ted Timmons wrote: > > > > > Hi, I have a x86 20.04 system, I can't find the PPA even after >doing > > > apt-add-repository and similar steps. Roughly, I'd expect this to > > > return something: > > > $ apt search chirp > > > > > > Thanks, > > > Ted > > _______________________________________________ > > chirp_users mailing list > > [email protected] > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Ted Timmons at [email protected] > > To unsubscribe, send an email to >[email protected] > > >------------------------------ > >Message: 20 >Date: Tue, 25 Aug 2020 14:01:37 -0400 (EDT) >From: "Nigel A. Gunn G8IFF/W8IFF" <[email protected]> >Subject: Re: [chirp_users] oddities (failures) finding/installing on > Ubuntu 20.04 >To: Discussion of CHIRP <[email protected]>, Ted > Timmons <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset=UTF-8 > >Don't you have to install flatpack software? My install doesn't know >what a flatpack is. > > > > On 25/08/2020 13:51 Ted Timmons <[email protected]> wrote: > > > > > > Aha, I thought some manual magic might be required. I "gave up" and > > went the flatpak route instead like Tony said: > > > > >------------------------------ > >Message: 21 >Date: Tue, 25 Aug 2020 11:09:23 -0700 >From: Ted Timmons <[email protected]> >Subject: Re: [chirp_users] oddities (failures) finding/installing on > Ubuntu 20.04 >Cc: Discussion of CHIRP <[email protected]> >Message-ID: > <CAK7GBH_1tbmS55C-Ed_F8NnokZeC3Bs5qN5jU3u0gJF=6Ad=9...@mail.gmail.com> >Content-Type: text/plain; charset="UTF-8" > >On Tue, Aug 25, 2020 at 11:01 AM Nigel A. Gunn G8IFF/W8IFF ><[email protected]> wrote: > > Don't you have to install flatpack software? My install doesn't know >what a flatpack is. > >Yes, that is taken care of in the first line of the install steps I >gave: > >apt install -y flatpak gnome-software-plugin-flatpak >flatpak remote-add --if-not-exists flathub >https://flathub.org/repo/flathub.flatpakrepo >flatpak install chirp-daily-20200807.flatpak > > >------------------------------ > >Message: 22 >Date: Tue, 25 Aug 2020 11:14:51 -0700 (MST) >From: Charles Gierke <[email protected]> >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >To: Discussion of CHIRP <[email protected]>, "Nigel > A. Gunn G8IFF/W8IFF" <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset="utf-8" > >Installed driver is the latest version > > > > On August 24, 2020 at 6:09 PM "Nigel A. Gunn G8IFF/W8IFF" ><[email protected]> wrote: > > > > Have you had a Windows update that has taken your CH340 driver out? >Windows has a habit of removing unsigned drivers. > > > > > > > > On 24 August 2020 at 20:57 Charles Gierke <[email protected]> >wrote: > > > > > > Opened Device Manager, Ports (COM & LPT) "USB-SERIAL CH340(COM3)" > > > I've always used COM 3 and it worked fine until last Wednesday. > > > > > > > > > > > > On August 24, 2020 at 5:48 PM Glenn K0LNY ><[email protected]> wrote: > > > > > > > > Chuck, > > > > Have you tried the following? > > > > open device manager, and seeing which com ports show, and then >unplug the cable, and see which one disappears, so you can select that >port in Chirp. > > > > HTH. > > > > > > > > Glenn > > > > > > > > ----- Original Message ----- > > > > From: Charles Gierke mailto:[email protected] > > > > To: Discussion of CHIRP mailto:[email protected] >; Silverfox mailto:[email protected] ; John LaMartina >mailto:[email protected] > > > > Sent: Monday, August 24, 2020 7:43 PM > > > > Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not >communicating > > > > > > > > thanks for the suggestion. Unfortunately, no luck. > > > > > > > > Chuck > > > > > > > > > > > > > > > > On August 23, 2020 at 4:26 PM Silverfox < >[email protected] mailto:[email protected] > wrote: > > > > > > > > > > > > > > > I forgot that you are on Windows. The windows OS is very poor >supporting USB. You might try going into the device manager and tell it >to show hidden devices. Once that is done, look at the USB entries and >delete all of them that are diminished icons. That is, they are lighter >than the other icons. > > > > > > > > > > Good luck. > > > > > > > > > > Alan > > > > > > > > > > > > > > > From: [email protected] >mailto:[email protected] >[mailto:[email protected]] On Behalf Of >Charles Gierke > > > > > Sent: Sunday, August 23, 2020 3:05 PM > > > > > To: Discussion of CHIRP; John LaMartina > > > > > Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not >communicating > > > > > > > > > > > > > > > hi, still no luck. > > > > > I went to the web site and put a death-grip on the plug and >held it in as far as it would go. I trimmed a hair of the edges of the >plug to let it seat on the bottom. > > > > > > > > > > thanks for the suggestions > > > > > > > > > > <!--[endif]--> > > > > > > > > > > On August 22, 2020 at 5:55 PM John LaMartina <[email protected]> >wrote: > > > > > > > > > > This may assist. > > > > > > > > > > Www.Miklor.com/COM/UV_ErrorMess.php > > > > > > > > > > > > > > > John > > > > > > > > > > Www.Miklor.com/UV5R > > > > > > > > > > > > > > > > > > > > <!--[endif]--> > > > > > > > > > > On Aug 22, 2020, at 6:45 PM, Charles Gierke <[email protected]> >wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > On Wednesday my 2 BaoFeng UV 5R radios could download and >upload to CHIRP. > > > > > > > > > > > > On Friday all I got was the following message: Radio Did Not >Respond. > > > > > > > > > > > > I tried reloading the latest version of CHIRP, no change. I >tried an earlier version of CHIRP, no change. I reloaded the latest >version back, no change. Visually the radio's red light blinks then the >LED display blinks then the error message shows up on CHIRP. > > > > > > > > > > > > > > > > > > Any suggestions? > > > > > > > > > > > > Thanks Chuck KJ7INT > > > > > > > > > > > > _______________________________________________ > > > > > > chirp_users mailing list > > > > > > [email protected] > > > > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > > > > This message was sent to John LaMartina at [email protected] > > > > > > To unsubscribe, send an email to >[email protected] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > chirp_users mailing list > > > > > [email protected] > > > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > > > This message was sent to Chuck at [email protected] > > > > > To unsubscribe, send an email to >[email protected] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > chirp_users mailing list > > > > > [email protected] > > > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > > > This message was sent to Chuck at [email protected] > > > > > To unsubscribe, send an email to >[email protected] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------- > > > > > > > > > > > > _______________________________________________ > > > > chirp_users mailing list > > > > [email protected] > > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > > This message was sent to Glenn at [email protected] > > > > To unsubscribe, send an email to >[email protected] > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > chirp_users mailing list > > > > [email protected] > > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > > This message was sent to Chuck at [email protected] > > > > To unsubscribe, send an email to >[email protected] > > > > > > > > > > _______________________________________________ chirp_users >mailing list >[email protected]http://intrepid.danplanet.com/mailman/listinfo/chirp_users > >This message was sent to Nigel Gunn, W8IFF at [email protected] To >unsubscribe, send an email to >[email protected] > > > > > > > > > > > > > Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 > > Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] >www http://www.ngunn.net > > > > > > > > _______________________________________________ > > chirp_users mailing list > > [email protected] > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Chuck at [email protected] > > To unsubscribe, send an email to >[email protected] > > > >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200825/fccc6431/attachment-0001.html > >------------------------------ > >Message: 23 >Date: Tue, 25 Aug 2020 11:27:16 -0700 (MST) >From: Charles Gierke <[email protected]> >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >To: Discussion of CHIRP <[email protected]>, "Peter > J. McClosky" <[email protected]> >Message-ID: <[email protected]> >Content-Type: text/plain; charset="utf-8" > >HI, I followed your advice and took it slow. I waited a minimum of 10 >seconds, I put a strangle hold on the plug and radio to insure the plug >was fully into the socket. I double checked the USB plug was in the USB >socket and it was connected to the Win 10 computer as COM 3. > >the radio is still not connecting to CHIRP. About 3 seconds after >starting the download, the radio seems to shut itself off and restart. > >thanks for your time and help. >Chuck > > > > On August 24, 2020 at 6:09 PM "Peter J. McClosky" ><[email protected]> wrote: > > > > Hello, > > > > I have programed well over a hundred UV-5x radios and have had both >easy and hard times programing them. > > > > One thing that I learned is to slow down, waiting about 10 seconds >between actions taken on the computer. This solve most of the error >problems. > > > > If that does not work, most of the rest to the time ,it is solved by >pushing the programing cable into the radio and keep pressure on the >cable until the pride is programed. I have to push it VERY hard. > > > > On a windows machines you have to select the right com port (I am >mostly a mac person so I find the right port by trial and error). > > > > As an aside, using more that 60 cables to program the radios, I have >only found one cable that was defective, so that is most likely, not >the problem. > > ----- > > Peter J. McClosky, N7IY > > Eugene, Oregon > > [email protected] mailto:[email protected] > > [email protected] > > http://home.earthlink.net/~pmcclosky/ > > > > > > > > On Aug 24, 2020, at 5:43 PM, Charles Gierke < [email protected] >mailto:[email protected] > wrote: > > > > > > thanks for the suggestion. Unfortunately, no luck. > > > > > > Chuck > > > > > > > > > > > > On August 23, 2020 at 4:26 PM Silverfox < >[email protected] mailto:[email protected] > wrote: > > > > > > > > I forgot that you are on Windows. The windows OS is very poor >supporting USB. You might try going into the device manager and tell it >to show hidden devices. Once that is done, look at the USB entries and >delete all of them that are diminished icons. That is, they are lighter >than the other icons. > > > > Good luck. > > > > Alan > > > > > > > > From: [email protected] >mailto:[email protected] >[mailto:[email protected]] On Behalf Of >Charles Gierke > > > > Sent: Sunday, August 23, 2020 3:05 PM > > > > To: Discussion of CHIRP; John LaMartina > > > > Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not >communicating > > > > > > > > hi, still no luck. > > > > I went to the web site and put a death-grip on the plug and held >it in as far as it would go. I trimmed a hair of the edges of the plug >to let it seat on the bottom. > > > > > > > > thanks for the suggestions > > > > > > > > > > > > > > > > On August 22, 2020 at 5:55 PM John LaMartina <[email protected] >mailto:[email protected] > wrote: > > > > > > > > This may assist. > > > > >Www.Miklor.com/COM/UV_ErrorMess.phphttp://www.miklor.com/COM/UV_ErrorMess.php > > > > > > > > John > > > > Www.Miklor.com/UV5Rhttp://www.miklor.com/UV5R > > > > > > > > > > > > > > > > > > > > On Aug 22, 2020, at 6:45 PM, Charles Gierke <[email protected] >mailto:[email protected] > wrote: > > > > > > > > > > > > ? > > > > > > > > > > On Wednesday my 2 BaoFeng UV 5R radios could download and >upload to CHIRP. > > > > > > > > > > On Friday all I got was the following message: Radio Did Not >Respond. > > > > > > > > > > I tried reloading the latest version of CHIRP, no change. I >tried an earlier version of CHIRP, no change. I reloaded the latest >version back, no change. Visually the radio's red light blinks then the >LED display blinks then the error message shows up on CHIRP. > > > > > > > > > > > > > > > > > > > > Any suggestions? > > > > > > > > > > Thanks Chuck KJ7INT > > > > > > > > > > _______________________________________________ > > > > > chirp_users mailing list > > > > > [email protected] >mailto:[email protected] > > > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > > > This message was sent to John LaMartina at [email protected] >mailto:[email protected] > > > > > To unsubscribe, send an email to >[email protected] >mailto:[email protected] > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > chirp_users mailing list > > > > [email protected] >mailto:[email protected] > > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > > This message was sent to Chuck at [email protected] >mailto:[email protected] > > > > To unsubscribe, send an email to >[email protected] >mailto:[email protected] > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > chirp_users mailing list > > > > [email protected] >mailto:[email protected] > > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > > This message was sent to Chuck at [email protected] >mailto:[email protected] > > > > To unsubscribe, send an email to >[email protected] >mailto:[email protected] > > > > > > > > > > _______________________________________________ > > > chirp_users mailing list > > > [email protected] >mailto:[email protected] > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > This message was sent to Peter at [email protected] >mailto:[email protected] > > > To unsubscribe, send an email to >[email protected] >mailto:[email protected] > > > > > > > > > > > > > _______________________________________________ > > chirp_users mailing list > > [email protected] > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Chuck at [email protected] > > To unsubscribe, send an email to >[email protected] > > > >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200825/274f771b/attachment-0001.html > >------------------------------ > >Message: 24 >Date: Tue, 25 Aug 2020 13:31:08 -0500 >From: "Glenn K0LNY" <[email protected]> >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating >To: "Discussion of CHIRP" <[email protected]> >Message-ID: <007901d67b0d$e6ebc250$7001a8c0@NUCPPYH> >Content-Type: text/plain; charset="utf-8" > >Hi Chuck, >Could it be that your battery is the problem? >Can you keep it in the charging cradle while doing the Chirp work? >HTH. >Glenn >----- Original Message ----- >From: Charles Gierke >To: Discussion of CHIRP ; Peter J. McClosky >Sent: Tuesday, August 25, 2020 1:27 PM >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating > > >HI, I followed your advice and took it slow. I waited a minimum of 10 >seconds, I put a strangle hold on the plug and radio to insure the plug >was fully into the socket. I double checked the USB plug was in the USB >socket and it was connected to the Win 10 computer as COM 3. > >the radio is still not connecting to CHIRP. About 3 seconds after >starting the download, the radio seems to shut itself off and restart. > >thanks for your time and help. >Chuck > > >On August 24, 2020 at 6:09 PM "Peter J. McClosky" ><[email protected]> wrote: > >Hello, > > >I have programed well over a hundred UV-5x radios and have had both >easy and hard times programing them. > > >One thing that I learned is to slow down, waiting about 10 seconds >between actions taken on the computer. This solve most of the error >problems. > > >If that does not work, most of the rest to the time ,it is solved by >pushing the programing cable into the radio and keep pressure on the >cable until the pride is programed. I have to push it VERY hard. > > >On a windows machines you have to select the right com port (I am >mostly a mac person so I find the right port by trial and error). > > >As an aside, using more that 60 cables to program the radios, I have >only found one cable that was defective, so that is most likely, not >the problem. > >----- >Peter J. McClosky, N7IY >Eugene, Oregon >[email protected] >[email protected] >http://home.earthlink.net/~pmcclosky/ > > >On Aug 24, 2020, at 5:43 PM, Charles Gierke < [email protected]> wrote: > > >thanks for the suggestion. Unfortunately, no luck. > >Chuck > > >On August 23, 2020 at 4:26 PM Silverfox < [email protected]> wrote: > > >I forgot that you are on Windows. The windows OS is very poor >supporting USB. You might try going into the device manager and tell it >to show hidden devices. Once that is done, look at the USB entries and >delete all of them that are diminished icons. That is, they are lighter >than the other icons. >Good luck. >Alan > > >From: [email protected] >[mailto:[email protected]] On Behalf Of >Charles Gierke >Sent: Sunday, August 23, 2020 3:05 PM >To: Discussion of CHIRP; John LaMartina >Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating > > >hi, still no luck. >I went to the web site and put a death-grip on the plug and held it in >as far as it would go. I trimmed a hair of the edges of the plug to let >it seat on the bottom. > >thanks for the suggestions > > > ><!--[endif]--> >On August 22, 2020 at 5:55 PM John LaMartina <[email protected]> wrote: > >This may assist. >Www.Miklor.com/COM/UV_ErrorMess.php > > >John >Www.Miklor.com/UV5R > > > > > ><!--[endif]--> >On Aug 22, 2020, at 6:45 PM, Charles Gierke <[email protected]> wrote: > >? >On Wednesday my 2 BaoFeng UV 5R radios could download and upload to >CHIRP. > >On Friday all I got was the following message: Radio Did Not Respond. > >I tried reloading the latest version of CHIRP, no change. I tried an >earlier version of CHIRP, no change. I reloaded the latest version >back, no change. Visually the radio's red light blinks then the LED >display blinks then the error message shows up on CHIRP. > > > >Any suggestions? > >Thanks Chuck KJ7INT > >_______________________________________________ >chirp_users mailing list >[email protected] >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to John LaMartina at [email protected] >To unsubscribe, send an email to >[email protected] > > >_______________________________________________ >chirp_users mailing list >[email protected] >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to Chuck at [email protected] >To unsubscribe, send an email to >[email protected] > > > > >_______________________________________________ >chirp_users mailing list >[email protected] >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to Chuck at [email protected] >To unsubscribe, send an email to >[email protected] > >_______________________________________________ >chirp_users mailing list >[email protected] >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to Peter at [email protected] >To unsubscribe, send an email to >[email protected] > > > > >_______________________________________________ >chirp_users mailing list >[email protected] >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to Chuck at [email protected] >To unsubscribe, send an email to >[email protected] > > > > >-------------------------------------------------------------------------------- > > >_______________________________________________ >chirp_users mailing list >[email protected] >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to Glenn at [email protected] >To unsubscribe, send an email to >[email protected] >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200825/8aa2a1aa/attachment-0001.html > >------------------------------ > >_______________________________________________ >chirp_users mailing list >[email protected] >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >To unsubscribe, send an email to >[email protected] > >End of chirp_users Digest, Vol 140, Issue 11 >******************************************** _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
