Think the chip is emulated by the processor in the radio. The cable is a str8 USB cable.
> On 26/03/2021 20:56 Lawrence Underwood <[email protected]> wrote: > > > Do you know where I can download a driver? Is it a FTDI cable or some sort? > > > > > On Mar 26, 2021, at 7:54 PM, Jim Unroe <[email protected]> wrote: > > > > On Fri, Mar 26, 2021 at 8:49 PM Lawrence Underwood <[email protected]> > > wrote: > >> > >> I am on a MacBook Pro 13 running 11.2.3. > >> > >> When I attempt to download the radio to Chirp the port that is auto > >> populated is /dev/cu/.Bluetooth-Incoming-Port. > >> When I put the radio into ADMS mode and attempt to download it I get > >> ‘ERROR’ on the radio and a message stating that the radio did not respond > >> on Chirp. I am using the cable supplied by Yaesu. > >> > >> Any ideas on how to get the radio to communicate with Chirp? > >> > >> Thanks. > > > > You do not have a driver installed that is compatible with the chip in > > your programming cable. When you choose the "Port", you will not > > select anything that has "bluetooth" in the description. > > > > Jim KC9HI > > _______________________________________________ > > chirp_users mailing list > > [email protected] > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Lawrence at [email protected] > > To unsubscribe, send an email to > > [email protected] > > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Nigel Gunn, W8IFF at [email protected] > To unsubscribe, send an email to > [email protected] Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] www http://www.ngunn.net _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
