On Wed, Mar 31, 2021 at 8:11 PM Joseph E. Rouillier III <[email protected]> wrote: > > All > > Thank you for taking your time to look at this issue. I have a Yaesu VX-170 > that I came across. Once I got it home I did a reset on the radio to bring > it back to factory defaults. Next I tried reading the radio from Chirp, > (Download from Radio). That fails no matter what I try it will not download > the file from the radio. > > The radio almost immediately shows error after pressing push to talk seeing > TX. and then in chirp I see Failed to communicate with radio: Failed to read > header (0) > > Attached is the Debug. > > Also just for testing I got a VX-170 file from a friend and tried to download > it to the radio also had errors. As soon as I get the radio into RX Chip > shows a error indicating Radio did not ack block at 0 the radio screen never > shows error it continues to show RX. > > See attached Debug.log file. > > Note I tested the cable to see if it was the problem borrowed a friends cable > as well, both cables same issue, and both cables successfully program an > FT-60 and my friend is able to read/write his VX-170 with his cable and my > cable and he sees the same errors as I do when trying my radio. > > I tested the jack with a speaker mic to make sure the jack seems to be > working correctly, speaker mic work fine can RX and TX. > > Finally in desperation I removed the battery and opened the little cover > under the battery and confirmed the radio was modded by someone removing the > 1 0 ohm resistor, and it looks like it only had 1 resistor as the 2nd upper > one looks to clean as if it was never there from the factors. I believe the > MOD is Expanded RX or TX I do not recall as I've never needed to perform the > mod was aware of it from researching the radio itself. > > Thanks for any assistance. Attaced is the debug file that should contain > both Download and Upload from Radio failures.
Not that I can help with this issue, but I don't see an attached debug.log file. Jim KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
