I was listed in an informational dialog prior to attempting to read from the
radio. There is a check box to not display these instructions again.
Kindly,
Robert
. .. ... ‘...^,^
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Tuesday, April 6th, 2021 at 6:33 PM, Tony Ling <[email protected]> wrote:
> As an aside, what is the basis for this 'radio at maximum volume', 'no active
> channel' advice based on.
> It sounds bizarre to me as a hardware guy.
>
> On Tue, 6 Apr 2021 at 22:53, Nigel A. Gunn G8IFF/W8IFF <[email protected]>
> wrote:
>
>> Usually /dev/ttyUSB0 unless you already have another serial device already
>> plugged in to a USB port.
>> Go to file manager and look in /dev/ and see what appears and disappears
>> when you plun in and unplug the cable.
>>
>>> On 06/04/2021 17:34 Robert via chirp_users
>>> <[email protected]> wrote:
>>>
>>>
>>> Hello,
>>>
>>> Total noob, here. Taking my exams on Thursday. Got my TIDRADIO UV-5R and
>>> the FTDI cable. How can I detect which /dev/tty is being used for the FTDI
>>> connection to my radio? I tried /dev/ttyS0 and /dev/ttyUSB0 which resulted
>>> in the error 'Radio did not respond'.
>>>
>>> Kindly,
>>> Robert
>>> . .. ... ‘...^,^
>>>
>>> _______________________________________________ chirp_users mailing list
>>> [email protected]
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was
>>> sent to Nigel Gunn, W8IFF at [email protected] To unsubscribe, send an email
>>> to [email protected]
>>
>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] www
>> http://www.ngunn.net
>> _______________________________________________
>> chirp_users mailing list
>> [email protected]
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Tony Ling at [email protected]
>> To unsubscribe, send an email to
>> [email protected]
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
