What? Is there no way to transmit data over RF? I thought that that was a transmit mode, in eligible frequencies. I guess the info transmitted must go through the mic input and out the spk jack, as those are the only jacks in my handheld. But I really thought that data transmission was possible. Oh dear, much more to research.
Kindly, Robert On 4/7/21 4:57 PM, Nigel A. Gunn G8IFF/W8IFF wrote: > You're not going to do that using any connector normally provided on the > radio. > You can send the data out of the computer through a serial port but it will > need to go directly into the modulator or VFO on the radio. There are special > data radios available but most amateur transceivers won't do it. > Video is different because of the bandwidth required so you might be better > with receiver and transmitter designed for TV use. > > >> I want to read /write data to be broadcast over the RF frequency the >> radio is set to. I want to intercept the traffic on the computer to run >> my own protocol, which may be audio/video but encoded into my protocol. >> I am thinking the answer is reading and writing to the tty may work, or >> mic input and spk output for audio. But I want data transmission, not >> audio.My software currently reads/writes to/from a socket. The read side >> of reading from a tty should probably be buffered, somehow. Something to >> figure out as I complete my ReedSolomon implementation and fix a few >> bugs in my protocol software. >> >> Kindly, >> Robert >> _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
