On Wed, Apr 14, 2021 at 8:26 PM <[email protected]> wrote: > > Bought a new UV-S9 which did not include a cable. The promised software was > not included however there was a link in the user’s manual > (http://www.abree.com/downloads) which takes you to a “Buy This Domain” site. > > > > I bought a cable from Amazon, a “Tenway Baofeng USB Programming Cable Win > 7/10, 64Bit for Baofeng Radio UV-5R, BF-888S, H-777 with Driver CD” but Win > 10 (64 bit) cannot find any drivers. Cable shows up in Device Manager as > “Other Devices / USB Serial” with no COM port assignment identified and > properties says “There are no compatible drivers for this device”. > > > > Anyone else encounter anything like this or can you offer insights into how > to get this radio programmed? > > > > Thank you all very much! > > > > Bob > > N0zfv
It most likely either has a Prolific USB-to-Serial chip which will require that you download, install and select the older Prolific v3.2.0.0 device driver or a WCH driver which, since it didn't get automatically installed by Windows, means that you need to download and install the CH340 device driver. The miklor.com website has links to the most common chip vendors (FTDI, Prolific, Silicon Labs and WCH) Windows drivers and instructions for selecting the Prolific v3.2.0.0 driver if that one is needed. http://www.miklor.com/COM/UV_Drivers.php Jim KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
