Frank, I, too, have an old Mac and I took off the Apple OS off of it and replaced it with Ubuntu Linux and all my troubles went away. Performance is better, too. No drivers needed. Of course, that may not work for you if you need Mac programs so your mileage may vary.
Thanks, David, [email protected] On Sun, May 30, 2021, 14:10 Frank Kohn <[email protected]> wrote: > Hi, > I am having a difficult time setting up Chirp to work with my FT-60R. I > am running an older Macbook pro with OS X High Sierra 10.13.6. I have two > USB/FTDI cables, one by Valley Enterprises and one by Maxtop. > > It worked before, but after updating to Chirp Daily-20210520, I get error > codes. I checked for the installed driver in Terminal and have ( 170 0 > 0xffffff7f833ed000 0x7000 0x7000 com.FTDI.driver.FTDIUSBSerialDriver > (2.4.4) B137605C-32D8-3E81-89B6-E1F8039FC427). However, this driver does > not show up in Chirp. I only see: /dev/cu./usbserial-AL0657ZO and another > for Bluetooth. > > I was able to load an old Chirp image, but it was difficult to arrange and > reorder repeaters imported from Repeaterbook. Chirp stalled, and, when I > checked my Mac, it indicated the software wasn't responding. > > I would appreciate any help anyone can provide. After programming the > FT-60R, I would also like to use Chirp to program my Yaesu FT-857D. > > 73, > Frank Kohn > W3MHP > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to David Evans at [email protected] > To unsubscribe, send an email to > [email protected]
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
