Thank you for your prompt response. I appreciate it. Issue 1: It seems that you folks update CHIRP quite frequently. Since Apple does not recognize you as a vendor it is somewhat awkward to find the work-around in order to install CHIRP on my MacBook Pro. How do I do this and what is Python Run time option,
Issue 2: When attempting to save the CHIRP grid, I run into all sorts of problems in that it does not recognize the file directory structure on the MacBook, and doesn’t allow me to save change to my desktop or other directory. Issue 3: I maintain my ‘channeled repeaters’ from the Repeater Book (export). CHIRP does not allow me to import changes from my Repeater Book desktop. Issue 4: I have the 2M and 70cm calling frequencies programmed into my BF-F8HP channels 1-4 respectively. The import Function of CHIRP overwrites this data causing me to re-enter them again manually. Is there any way around this? Thanks for listening and I hope I can get some positive feedback to resolve these issues. KD2WGN > On Aug 27, 2021, at 12:16 PM, Ken Hansen <[email protected]> wrote: > > John, > > This is the correct forum for issues installing/running CHIRP or for issues > programming specific radios. > > Is the issue that CHIRP won't run on your computer, or that CHIRP runs, but > fails to work with this specific radio? > > And just got clarity sake, you are attempting to program the Baofeng BF-F8HP, > a radio with 3 power levels. > > Ken, N2VIP > >> On Aug 27, 2021, at 10:28, JOHN E BECK Sr <[email protected]> wrote: >> >> I don’t know if this is the proper forum to raise an issue regarding CHIRP >> on MacBook Pro (Mac OS 11.5.2 Big Sur) but I need help in getting CHIRP to >> work with regard to interfacing uploads/downloads to my F8-HP HT. If it is >> not, please provide me with a means by which I can state my problem in >> detail and track a resolution. >> >> Thank you. >> >> KD2WGN >> >> >> >> >>> On Aug 26, 2021, at 7:07 PM, Eric Chopin <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> Yaesu FT270 H/H >>> >>> Greetings, so far I have used CHIRP with 100% success in programming many >>> radios. >>> What I REALLY need is being able to program the YAESU FT270 Hand Held. >>> When is one of you brilliant guys going to update CHIRP with this radio? >>> >>> Thanks >>> VE7ECJ >>> >>> On Sun, Aug 22, 2021 at 12:01 PM >>> <[email protected] >>> <mailto:[email protected]>> wrote: >>> Send chirp_users mailing list submissions to >>> [email protected] >>> <mailto:[email protected]> >>> >>> To subscribe or unsubscribe via the World Wide Web, visit >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >>> or, via email, send a message with subject or body 'help' to >>> [email protected] >>> <mailto:[email protected]> >>> >>> You can reach the person managing the list at >>> [email protected] >>> <mailto:[email protected]> >>> >>> When replying, please edit your Subject line so it is more specific >>> than "Re: Contents of chirp_users digest..." >>> >>> >>> Today's Topics: >>> >>> 1. Re: UV5X Programming issue (White Ranger) >>> >>> >>> ---------------------------------------------------------------------- >>> >>> Message: 1 >>> Date: Sat, 21 Aug 2021 14:33:09 -0500 >>> From: White Ranger <[email protected] >>> <mailto:[email protected]>> >>> Subject: Re: [chirp_users] UV5X Programming issue >>> To: Discussion of CHIRP <[email protected] >>> <mailto:[email protected]>> >>> Message-ID: >>> <CAP+N95FGwe=vrt21yd+eidsjhknl0j_xghmzqd7pejxniit...@mail.gmail.com >>> <mailto:vrt21yd%[email protected]>> >>> Content-Type: text/plain; charset="utf-8" >>> >>> Radio should be ON when up or downloading. >>> Remove the driver and cable program, reboot PC reload driver >>> SHOULD correct issue. If using aftermarket cable check to see contacts are >>> CLEAN (*shiny) and fit TIGHTLY into the mike provisioning adapter (Mic >>> jack) DO NOT touch ANY buttons while programming. Worst case, prior to >>> programming RESET the radio to factory resets then load your amended >>> program. >>> >>> On Thu, Aug 19, 2021 at 2:03 PM Jim Unroe <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> > Hi Eric, >>> > >>> > On Thu, Aug 19, 2021 at 12:47 PM Eric Chopin <[email protected] >>> > <mailto:[email protected]>> wrote: >>> > > >>> > > UV5XP.... >>> > > However to get CHIRP to see the radio either in the 'Download from >>> > radio' >>> > > or 'Upload to radio' ... with the cable plugged in to my PC or my >>> > MAC, the >>> > > radio must me switched OFF...then as I select 'Download or upload' >>> > as I >>> > > select 'OK' i must immediately switch ON my radio then CHIRP sees it >>> > and >>> > > proceeds. If I try to 'Download or upload' with the radio already >>> > switched >>> > > on I get the message 'The radio did not respond' as CHIRP cannot see >>> > it >>> > > connected. >>> > > Any suggestions? >>> > > Thanks >>> > > VE7ECJ >>> > >>> > That sounds like a programming cable/driver issue. Also, to program >>> > that radio you must choose... >>> > >>> > Vendor: Radioddity >>> > Model: UV-5G >>> > >>> > Jim KC9HI >>> > _______________________________________________ >>> > chirp_users mailing list >>> > [email protected] >>> > <mailto:[email protected]> >>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> > <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >>> > This message was sent to [email protected] >>> > <mailto:[email protected]> at >>> > [email protected] <mailto:[email protected]> >>> > To unsubscribe, send an email to >>> > [email protected] >>> > <mailto:[email protected]> >>> > >>> -------------- next part -------------- >>> An HTML attachment was scrubbed... >>> URL: >>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210821/b544e8b4/attachment-0001.html >>> >>> <http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210821/b544e8b4/attachment-0001.html> >>> >>> >>> ------------------------------ >>> >>> _______________________________________________ >>> chirp_users mailing list >>> [email protected] >>> <mailto:[email protected]> >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >>> To unsubscribe, send an email to >>> [email protected] >>> <mailto:[email protected]> >>> >>> End of chirp_users Digest, Vol 152, Issue 12 >>> ******************************************** >>> _______________________________________________ >>> chirp_users mailing list >>> [email protected] >>> <mailto:[email protected]> >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to John E Beck at [email protected] >>> To unsubscribe, send an email to >>> [email protected] >> >> _______________________________________________ >> chirp_users mailing list >> [email protected] >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Ken Hansen at [email protected] >> To unsubscribe, send an email to >> [email protected] > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to John E Beck at [email protected] > To unsubscribe, send an email to > [email protected]
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
