Many thanks for your several responses and suggestions. Since yesterday, Monday, Dec. 13, 2021 I’ve been trying with small result to get frequencies loaded onto my Yaesu FT-817ND. In the past I’ve had no problems with CHIRP and my various HT’sI’ve tried everything I can think of, as well as, by observing videos; following suggestions from more experienced folks; loading CHIRP first before turning on the radio and after turning on the radio to no avail. I’ve tried in “clone mode” and outside of clone mode. I’ve unplugged both ends of the FTDI FT232 chipset USB to 8 Pin Mini Din Male Serial Adapter CT-62 CAT Cable for Yaesu Radio FT-817, FT-857 and then plugged them in again but nothing helps. Needless to say I’ve read and reread the Owners Manual several times but no luck. Indeed, the manual seems to be outdated in the area of CT-62 CAT. So I;m at my wits end! If anybody can help it will be appreciated. I was able to download the .img files from the radio after trial and error by using the designation of Yaesu FT-817ND (US). That said I’ve been unable to upload the .img file back to the radio after successfully entering all the wanted frequencies for 70cm, 2 meters and 6 meters. One thing I found odd was when the radio downloaded to CHIRP it had some strange entries, (see the attached), perhaps that is the reason for it. At any rate I couldn’t eliminate these oddities from the .img list. If anyone has any suggestions I would greatly appreciate it as I would like to be up and running on my Yaesu in January, 2022. 73 Mr. McCeeKC1HLD
____________________________________________________________ Choose to be safer online. Opt-in to Cyber Safety with NortonLifeLock. Get Norton 360 with LifeLock starting at $9.95/month.* https://store.netzero.net/account/showService.do?serviceId=nz-nLifeLock&utm_source=mktg&utm_medium=taglines&utm_campaign=nzlifelk_launch&utm_content=tag995&promoCode=A23457
Yaesu_FT-817ND (US)_20211214.img
Description: Yaesu_FT-817ND (US)_20211214.img
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
