Hi, Leilani. I have a BTECH UV-5X3 and had some simple issues trying to program. When you attached the cable to the radio, was the radio on or off? Is it on or off when you get the error message? (I had to make sure it was off when I plugged it in, then on when I tried to upload the radio data to CHIRP, and if it asked me to turn it on or off I did that) Is the cable pushed all the way into the radio? (not trying to be condescending...that was one of my problems...the plugs have to be pushed in hard) ...hoped that helped... de A Hendrix KO4UMY
On Sat, Feb 19, 2022 at 2:59 PM Leilani Mariotti <[email protected]> wrote: > I am trying to download CHIRP onto my Baofeng UV-5X3 radio. > > I have the latest CHIRP, the cable is attached to the computer and radio. > > Here is the error code that I see when trying to do the initial from > Radio: CHIRP - An error had occurred Error reading date from radio: not > the amount of date we want. OK > > I need your help so I can program the radio. > Thank you. > > HamWAF > [email protected] > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to AHendrix at [email protected] > To unsubscribe, send an email to > [email protected] > To report this email as off-topic, please email > [email protected]
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected]
