I’m not sure if a started this thread or if I was added to it- my question was how to get chirp to work on Monterey OS, so far I have not been able to make it work-
On Tue, Jul 19, 2022 at 7:48 AM Jim Unroe <[email protected]> wrote: > On Tue, Jul 19, 2022 at 1:03 AM K0LNY_Glenn <[email protected]> wrote: > > > > Hi, > > I am planning on putting in the voice downlink and uplink for the > > International Space Station into my Baofeng. > > The downlink is in the 7Cm band and the uplink is in the 2 M band. > > Typically in Chirp I enter a normal offset, plus or minus. > > How do I do this in Chirp to cover such a difference in frequency? > > . Downlink 437.800MHz FM; Doppler +-10KHz > > . Uplink 145.990MHz FM with 67.0 Hz PL > > > > Thanks. > > > > Glenn > > Hi Glenn, > > For radios that support "split" (most Baofeng dual-band radios do), > what you do is set Duplex to "split" and then set Offset to the > absolute TX frequency. See the Offset field of the Understanding > CHIRP's Columns guide in the CHIRP documentation area. > > https://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns > > Here is how it should look in the spreadsheet style Memory Editor. > > Frequency: 437.800000 > Tone Mode: Tone > Tone: 67.0 > Duplex: split > Offset: 145.990000 > > Jim KC9HI > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to fred packwood at [email protected] > To unsubscribe, send an email to > [email protected] > To report this email as off-topic, please email > [email protected] >
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected]
