CI-V Transceive OFF or ON Turns the CI-V Transceive function ON or OFF Clone Clone Mode Reads or writes the CS-7100 data to or from the PC, and/or receives data from a Master transceiver
On Wed, 27 Jul 2022 at 10:55, Tony Ling <[email protected]> wrote: > Two COM port numbers are assigned to the [USB] connector. One of them is > “USB1,” used for cloning and CI-V operation. The other one is “USB2,” whose > function is selected in “USB2 Function” item of the “Connectors” Set mode. > (p. 6-8) > > On Wed, 27 Jul 2022 at 02:58, Jim Unroe <[email protected]> wrote: > >> On Tue, Jul 26, 2022 at 4:04 PM Michael Nadler KI7QIB >> <[email protected]> wrote: >> > >> > ICOM 7100 connected to Linux system via the mini-USB port. FLRIG can >> control the radio through that interface. >> > >> > Running CHIRP 0.3.0dev, when I try to download from the radio via >> /dev/ttyUSB0, I get a pop-up error message: unicode strings are not >> supported, please encode to bytes: <<gibberish characters>>>". >> > >> > Are there specific settings I need to have set on the ICOM? >> > >> > Is CHIRP able to interact with the ICOM-7100 via the mini-USB port? Do >> I have to use the RT-Systems FTDI cable into the audio port? >> > >> > >> > P.S. I also tried running Windows CHIRP daily-20220408. Download from >> radio gets "error" in every entry. >> > >> > >> > -- >> > Michael Nadler >> > KI7QIB >> >> I know that when I used CHIRP on my IC-7300, I used a different cable >> than I did when I used FLRIG. I also had to edit a setting in the >> radio for CHIRP and change it back for FLRIG. >> >> Jim KC9HI >> _______________________________________________ >> chirp_users mailing list >> [email protected] >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Tony Ling at [email protected] >> To unsubscribe, send an email to >> [email protected] >> To report this email as off-topic, please email >> [email protected] >> Searchable archive: >> https://www.mail-archive.com/[email protected] >> >
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
