Hi Julian - when I plug mine into my machine running Linux i get a 
different converter

   FTDI USB Serial Device converter detected

instead of the

  pl2303

You might have the wrong cable.

This is the cable I purchased for mine

   
https://www.amazon.com/gp/product/B00HUB0ONK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

-- Cinaed



[2309548.225049] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter 
detected
[2309548.226448] usb 1-1.1: Detected FT232RL
[2309548.230334] usb 1-1.1: Number of endpoints 2
[2309548.235250] usb 1-1.1: Endpoint 1 MaxPacketSize 64
[2309548.239657] usb 1-1.1: Endpoint 2 MaxPacketSize 64
[2309548.244912] usb 1-1.1: Setting MaxPacketSize 64
[2309548.249847] usb 1-1.1: FTDI USB Serial Device converter now 
attached to tty

On 10/28/22 10:27, Julian Macassey wrote:
> Oct 28 18:07:10 localhost kernel: [218263.636611] usb 3-4: new full-speed USB 
> device number 15 using xhci_hcd
> Oct 28 18:07:11 localhost kernel: [218264.061760] usb 3-4: New USB device 
> found, idVendor=067b, idProduct=2303, bcdDevice= 3.00
> Oct 28 18:07:11 localhost kernel: [218264.061769] usb 3-4: New USB device 
> strings: Mfr=1, Product=2, SerialNumber=0
> Oct 28 18:07:11 localhost kernel: [218264.061772] usb 3-4: Product: 
> USB-Serial Controller
> Oct 28 18:07:11 localhost kernel: [218264.061775] usb 3-4: Manufacturer: 
> Prolific Technology Inc.
> Oct 28 18:07:11 localhost kernel: [218264.064089] pl2303 3-4:1.0: pl2303 
> converter detected
> Oct 28 18:07:11 localhost kernel: [218264.066251] usb 3-4: pl2303 converter 
> now attached to ttyUSB0
> Oct 28 18:07:11 localhost mtp-probe: checking bus 3, device 15: 
> "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4"
> Oct 28 18:07:11 localhost mtp-probe: bus: 3, device: 15 was not an MTP device
> Oct 28 18:07:11 localhost snapd[13154]: hotplug.go:200: hotplug device add 
> event ignored, enable experimental.hotplug
> Oct 28 18:07:11 localhost mtp-probe: checking bus 3, device 15: 
> "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4"
> Oct 28 18:07:11 localhost mtp-probe: bus: 3, device: 15 was not an MTP device
> Oct 28 18:07:13 localhost ModemManager[824]: <info>  [base-manager] couldn't 
> check support for device '/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4': not 
> supported by any plugin

_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
To report this email as off-topic, please email 
[email protected]
Searchable archive: 
https://www.mail-archive.com/[email protected]

Reply via email to