Hi Dean,
Make sure that the cable is really tight in the radio.
And, open device manager and see what port is in use, and make sure the same
port is selected in Chirp.
That is where I would start.
HTH.
Glenn
----- Original Message -----
From: D Bunk
To: [email protected]
Sent: Monday, December 19, 2022 5:56 PM
Subject: [chirp_users] Error comport
I have a brand new baofeng UV-82 but can not get the program to recognize it. I
keep getting an error message “can not open port”. I have downloaded the lasted
version of the program. Any ideas? Using windows 10 on pc.
/r
Dean
/r
Dean
--------------------------------------------------------------------------------
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to K0LNY at [email protected]
To unsubscribe, send an email to [email protected]
To report this email as off-topic, please email
[email protected]
Searchable archive:
https://www.mail-archive.com/[email protected]
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
To report this email as off-topic, please email
[email protected]
Searchable archive:
https://www.mail-archive.com/[email protected]
