Are there not any problems installing it as root? ----- Original Message ----- From: "Mike W" <[email protected]> To: "Dan Smith via chirp_users" <[email protected]> Sent: Saturday, January 14, 2023 4:12 PM Subject: Re: [chirp_users] help running chirp-next on RPI
At present I don't have a radio that chirp talks to so I'm unable to test further, but 'chirp-latest' appears to be functional on my Raspberry Pi 4 following the info in this thread. 73 Mike G8NXD. ==== $ sudo apt install git python3-wxgtk4.0 python3-serial python3-six python3-future python3-requests python3-pip Then grab the tarball and run "pip install" on the tarball If you ran the above as your own user, then ~/.local/bin is where they are. If you ran it as root, it should put it in /usr/local/bin. ==== _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected] _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
