I was using a tidradio bluetooth programming adaptor and after programming the scan feature stopped working and the programmed channels wouldn't program and a lot of other issues that I assume come with a bricked radio. I tried resetting both radios from the menu but it didn't help. I'm assuming the firmware is messed up somehow.
UV82HP - Hold down #3 and power on- US2S35 Hold down #6 & power on- 150602N BF-F8HP - Hold down #3 and power on- F8HP-1 Hold down #6 & power on6- 160102 I'm not sure if there's a way to do a hard reset in chirp to get everything back to factory settings or if I have to do something with the firmware? Any help would be appreciated. I'm better at seeing how it's done on video rather than following steps but anything is worth a try right now. Thanks, Jeff
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
