On 2023-02-18 at 08:27, Jim Unroe ([email protected]) wrote:
> > I show:
> > Display Mode (A) Name
> > Display Mode (B) Name
>
> OK. So MDF-A and MDF-B are set to NAME in the radio. So you will not
> be able to see the programmed frequency.
The radio continues to show the old, no longer in use
freq. This is baffling.
>
> > > This is most likely your situation.
> >
> > So here's what happens:
> >
> > MR shows V16 (Channel name in but VFO shows 146.460 in my
> > worksheet. Shown on CHIRP it is 145.200 which is what I want.
>
> This is because the frequency shown in VFO (frequency) mode has
> absolutely nothing to do with the frequency of the channel named V16
> in MR (channel) mode.
>
>
> What most people do is set one display line to FREQuency and the other
> display line to NAME. That way when you set both display lines to the
> same channel number (they have to be synced manually because each
> display line is independent and the radio has no ability to
> automatically sync them), the channel name and frequency can be seen
> at the same time.
So, I changed it to Freq and now the radio shows the Freq
I programmed.
>
> Every indication is that CHIRP is working as expected. If you would
> like to continue discussion of how your radio is operated, please
> contact me directly. I would be happy to help you with that.
Now I can see the Freqs displayed. I can't confirm
because I hear no traffic, which is I am told the normal
condition.
Thanks very much for your help. I appreciate it.
--
"Any Tom, Dick or Harry can be in Oasis, you know what I mean, if
you've got the right haircut" - Noel Gallagher
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
To report this email as off-topic, please email
[email protected]
Searchable archive:
https://www.mail-archive.com/[email protected]
