On Thu, Mar 30, 2023 at 10:07 AM K0LNY_Glenn <[email protected]> wrote: > > Hey All, > I'm working on a CSV file to import into my Kenwood 2000, and I'm putting in > a few commercial radio stations, and I am wondering about the FM stations. > Will the Kenwood 2000 accept the WFM in the mode column, or do I need to use > just FM? > Thanks.
This would depend on the particular radio model and how the developer chose to support it. Unfortunately "Kenwood 2000" isn't an actual model number so I will assume that you are referring to a Kenwood TS-2000. In this case the TS-2000 driver only supports "LSB", "USB", "CW", "FM" and "AM" in which case the FM would be the typical 25KHz channel spacing. The NFM (12.5KHz) and wider WFM (broadcast) bandwidths are not supported. My Kenwood TH-F6a, on the other hand, supports "FM", "WFM", "AM", "LSB", "USB" and "CW". HTH Jim KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
