I am limited on the systems that I can run chirp next on. I also have a raspberry pi next to my Kenwood. I suspect that I cannot connect to it with chirp next over my home network. So, I'm wondering if chirp next is in the raspberry pi's repository, or if I have to try and install it by hand. Glenn ----- Original Message ----- From: "Jim Unroe" <[email protected]> To: "Discussion of CHIRP" <[email protected]> Sent: Thursday, March 30, 2023 8:17 PM Subject: Re: [chirp_users] string error
On Thu, Mar 30, 2023 at 8:43 PM K0LNY_Glenn <[email protected]> wrote: > > Hi Jim, > Here it is for you or anyone else to have a look to see if you can fix it > up > for me. > It is attached. > Glenn Thanks Glenn. You are apparently using classic CHIRP because your CSV file loads into CHIRP-next without any errors. I assume that this is because classic CHIRP works better with a screen reader. The problem is that there are too many fields with no data. There are many fields in classic CHIRP that cannot be empty. Only "Name", "Duplex", "Tone", "Skip", "Comment", "URCALL", "RPT1CALL", "RPT2CALL" and "DVCODE" can have null values. All the rest must contain something and it must be of the correct type (string, integer, etc). The easiest way to "fix" your CSV file was to simply load it into CHIRP-next and then immediately save it back out to a different CSV file (attached). Jim KC9HI -------------------------------------------------------------------------------- _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected] _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
