I have a Baofeng DR1801
Using Chirp on Windows I can read/write to the radio
Using Kubuntu 22.10, running: python3
-mchirp.wxui I get an error message:
WARNING: Unable to select ''
ERROR: uv5r._ident_radio: Radio did not respond
ERROR: uv5r._ident_radio: Radio did not respond
ERROR: Failed to clone: Radio did not respond
Traceback (most recent call last):
File
"/home/john/.local/lib/python3.10/site-packages/chirp/wxui/clone.py",
line 66, in run
self._fn()
File
"/home/john/.local/lib/python3.10/site-packages/chirp/drivers/uv5r.py",
line 845, in sync_in
self._mmap = _do_download(self)
File
"/home/john/.local/lib/python3.10/site-packages/chirp/drivers/uv5r.py",
line 554, in _do_download
data = _ident_radio(radio)
File
"/home/john/.local/lib/python3.10/site-packages/chirp/drivers/uv5r.py",
line 549, in _ident_radio
raise error
File
"/home/john/.local/lib/python3.10/site-packages/chirp/drivers/uv5r.py",
line 526, in _ident_radio
data = _do_ident(radio, magic)
File
"/home/john/.local/lib/python3.10/site-packages/chirp/drivers/uv5r.py",
line 421, in _do_ident
raise errors.RadioError("Radio did not respond")
dmesg confirms the cable is connected to ttyUSB0.
Is this a permissions problem?
I have tried: $ sudo usermod -a -G $(stat -c %G
/dev/ttyUSB0) $USER
What else can I do?
--
signature-mini
Kia ora
*JohnG*
_______________________________________________
/using LINUX :: the free open source operating system/
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
To report this email as off-topic, please email
[email protected]
Searchable archive:
https://www.mail-archive.com/[email protected]
