Just to complete the thread on +-, SFT-D (offset dir) and OFFSET (value) function only in VFO mode. + OR - shown /only/ in VFO mode. MR mode uses and stores explicit RX and TX frequencies. +- (both) is shown for all channels in MR mode.
~R~ NE1EE On 2024-02-15 11:13:, Rich NE1EE wrote: >I had just finished a session with another ham where I explained CTCSS on >several radios. I thought that the UV-5s showed + or -, like the others. I was >wrong. I just checked them both. It's just as you wrote. Thanks for the >comment. 73 ~Rich~ NE1EE On 2024-02-15 08:40:, John Wuest wrote: >The "+-" on >the display is there to show that an offset is programmed, but not which >direction it actually is. Goofy, but that's what it is. > >On Thu, Feb 15, >2024 at 8:06 AM Rich NE1EE ><<mailto:thedusty...@imaginarian.org>thedusty...@imaginarian.org> wrote: >I >have the BaoFeng UV-5RTP and the BTECH UV-5X3. _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-ow...@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
