There not thing as out-of-memory for the ld process in dmesg. Here is the dmseg output: -------------- Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27.30-170.2.82.fc10.i686 ([email protected]) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Mon Aug 17 08:38:59 EDT 2009 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000007f66d800 (usable) BIOS-e820: 000000007f66d800 - 0000000080000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x7f66d max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 38000000 @ 7000-c000 Using x86 segment limits to approximate NX protection RAMDISK: 37ce3000 - 37fef0fd ACPI: RSDP 000FBBF0, 0024 (r2 DELL ) ACPI: XSDT 7F66F200, 005C (r1 DELL M08 27D80C13 ASL 61) ACPI: FACP 7F66F09C, 00F4 (r4 DELL M08 27D80C13 ASL 61) ACPI: DSDT 7F66F800, 5676 (r2 INT430 SYSFexxx 1001 INTL 20050624) ACPI: FACS 7F67E000, 0040 ACPI: HPET 7F66F300, 0038 (r1 DELL M08 1 ASL 61) ACPI: APIC 7F66F400, 0068 (r1 DELL M08 27D80C13 ASL 47) ACPI: MCFG 7F66F3C0, 003E (r16 DELL M08 27D80C13 ASL 61) ACPI: SLIC 7F66F49C, 0176 (r1 DELL M08 27D80C13 ASL 61) ACPI: BOOT 7F66EFC0, 0028 (r1 DELL M08 27D80C13 ASL 61) ACPI: SSDT 7F66DA40, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) 1142MB HIGHMEM available. 896MB LOWMEM available. mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00008000 - 0000f000 (9 early reservations) ==> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 000097712c] TEXT DATA BSS ==> [0000400000 - 000097712c] #4 [0037ce3000 - 0037fef0fd] RAMDISK ==> [0037ce3000 - 0037fef0fd] #5 [0000978000 - 000097c000] INIT_PG_TABLE ==> [0000978000 - 000097c000] #6 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00038000 HighMem 0x00038000 -> 0x0007f66d Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007f66d On node 0 totalpages: 521740 free_area_init_node: node 0, pgdat c07f7b00, node_mem_map c1000000 DMA zone: 3967 pages, LIFO batch:0 Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 290176 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:78000000) PERCPU: Allocating 41372 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517663 Kernel command line: ro root=UUID=cee72a65-1f1c-4750-b9c3-45662155075c rhgb quiet Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c08a4000 soft=c0884000 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 1994.352 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2060052k/2087348k available (2750k kernel code, 26072k reserved, 1422k data, 416k init, 1169844k highmem) virtual kernel memory layout: fixmap : 0xffc57000 - 0xfffff000 (3744 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0819000 - 0xc0881000 ( 416 kB) .data : 0xc06afa26 - 0xc0813618 (1422 kB) .text : 0xc0400000 - 0xc06afa26 (2750 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 3988.70 BogoMIPS (lpj=1994352) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080609 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz stepping 0a CPU 1 irqstacks, hard=c08a5000 soft=c0885000 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3989.24 BogoMIPS (lpj=1994620) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (7977.94 BogoMIPS). sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=340 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=492 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=184 bytes sizeof(task_struct)=3268 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 840 bytes Booting paravirtualized kernel on bare hardware Time: 9:51:48 Date: 10/06/09 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:02.0 reg 10 64bit mmio: [fea00000, feafffff] PCI: 0000:00:02.0 reg 18 64bit mmio: [e0000000, efffffff] PCI: 0000:00:02.0 reg 20 io port: [eff8, efff] PCI: 0000:00:02.1 reg 10 64bit mmio: [feb00000, febfffff] PCI: 0000:00:1a.0 reg 20 io port: [6f20, 6f3f] PCI: 0000:00:1a.1 reg 20 io port: [6f00, 6f1f] PCI: 0000:00:1a.7 reg 10 32bit mmio: [fed1c400, fed1c7ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled PCI: 0000:00:1b.0 reg 10 64bit mmio: [fe9fc000, fe9fffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [6f80, 6f9f] PCI: 0000:00:1d.1 reg 20 io port: [6f60, 6f7f] PCI: 0000:00:1d.2 reg 20 io port: [6f40, 6f5f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fed1c000, fed1c3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/ TCO pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO PCI: 0000:00:1f.1 reg 10 io port: [1f0, 1f7] PCI: 0000:00:1f.1 reg 14 io port: [3f4, 3f7] PCI: 0000:00:1f.1 reg 18 io port: [170, 177] PCI: 0000:00:1f.1 reg 1c io port: [374, 377] PCI: 0000:00:1f.1 reg 20 io port: [6fa0, 6faf] PCI: 0000:00:1f.2 reg 10 io port: [6eb0, 6eb7] PCI: 0000:00:1f.2 reg 14 io port: [6eb8, 6ebb] PCI: 0000:00:1f.2 reg 18 io port: [6ec0, 6ec7] PCI: 0000:00:1f.2 reg 1c io port: [6ec8, 6ecb] PCI: 0000:00:1f.2 reg 20 io port: [6ee0, 6eff] PCI: 0000:00:1f.2 reg 24 32bit mmio: [fe9fb800, fe9fbfff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled PCI: 0000:00:1f.3 reg 10 32bit mmio: [fe9fb700, fe9fb7ff] PCI: 0000:00:1f.3 reg 20 io port: [10c0, 10df] PCI: 0000:0c:00.0 reg 10 64bit mmio: [fe8fc000, fe8fffff] pci 0000:0c:00.0: supports D1 pci 0000:0c:00.0: supports D2 pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold pci 0000:0c:00.0: PME# disabled PCI: bridge 0000:00:1c.1 32bit mmio: [fe800000, fe8fffff] PCI: bridge 0000:00:1c.3 io port: [d000, dfff] PCI: bridge 0000:00:1c.3 32bit mmio: [fe600000, fe7fffff] PCI: bridge 0000:00:1c.3 64bit mmio pref: [f0000000, f01fffff] PCI: 0000:09:00.0 reg 10 64bit mmio: [fe5f0000, fe5fffff] pci 0000:09:00.0: PME# supported from D3hot D3cold pci 0000:09:00.0: PME# disabled PCI: bridge 0000:00:1c.5 32bit mmio: [fe500000, fe5fffff] PCI: 0000:03:01.0 reg 10 32bit mmio: [fe4ff800, fe4fffff] pci 0000:03:01.0: supports D1 pci 0000:03:01.0: supports D2 pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.0: PME# disabled PCI: 0000:03:01.1 reg 10 32bit mmio: [fe4ff400, fe4ff4ff] pci 0000:03:01.1: supports D1 pci 0000:03:01.1: supports D2 pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.1: PME# disabled PCI: 0000:03:01.2 reg 10 32bit mmio: [fe4ff500, fe4ff5ff] pci 0000:03:01.2: supports D1 pci 0000:03:01.2: supports D2 pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.2: PME# disabled PCI: 0000:03:01.3 reg 10 32bit mmio: [fe4ff600, fe4ff6ff] pci 0000:03:01.3: supports D1 pci 0000:03:01.3: supports D2 pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.3: PME# disabled PCI: 0000:03:01.4 reg 10 32bit mmio: [fe4ff700, fe4ff7ff] pci 0000:03:01.4: supports D1 pci 0000:03:01.4: supports D2 pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.4: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 32bit mmio: [fe400000, fe4fffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4 ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:09: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:09: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0a: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0a: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0a: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0a: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz tracer: 772 pages allocated for 65536 entries of 48 bytes actual entries 65620 ACPI: RTC can wake from S4 system 00:05: ioport range 0xc80-0xcff could not be reserved system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved system 00:09: ioport range 0x900-0x97f has been reserved system 00:09: ioport range 0x4d0-0x4d1 has been reserved system 00:0a: ioport range 0xf400-0xf4fe has been reserved system 00:0a: ioport range 0x1080-0x10bf has been reserved system 00:0a: ioport range 0x10c0-0x10df has been reserved system 00:0a: ioport range 0x809-0x809 has been reserved system 00:0b: iomem range 0x0-0x9efff could not be reserved system 00:0b: iomem range 0x9f000-0x9ffff could not be reserved system 00:0b: iomem range 0xc0000-0xcffff could not be reserved system 00:0b: iomem range 0xe0000-0xfffff could not be reserved system 00:0b: iomem range 0x100000-0x7f66d7ff could not be reserved system 00:0b: iomem range 0x7f66d800-0x7f6fffff could not be reserved system 00:0b: iomem range 0x7f700000-0x7f7fffff could not be reserved system 00:0b: iomem range 0x7f700000-0x7fefffff could not be reserved system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved system 00:0b: iomem range 0xffa00000-0xffafffff has been reserved system 00:0b: iomem range 0xfec00000-0xfec0ffff could not be reserved system 00:0b: iomem range 0xfee00000-0xfee0ffff could not be reserved system 00:0b: iomem range 0xfed20000-0xfed8ffff could not be reserved system 00:0b: iomem range 0xfeda0000-0xfeda3fff could not be reserved system 00:0b: iomem range 0xfeda4000-0xfeda4fff could not be reserved system 00:0b: iomem range 0xfeda5000-0xfeda5fff could not be reserved system 00:0b: iomem range 0xfeda6000-0xfeda6fff has been reserved system 00:0b: iomem range 0xfed18000-0xfed1bfff could not be reserved system 00:0b: iomem range 0xf8000000-0xfbffffff could not be reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xfe800000-0xfe8fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d pci 0000:00:1c.3: IO window: 0xd000-0xdfff pci 0000:00:1c.3: MEM window: 0xfe600000-0xfe7fffff pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09 pci 0000:00:1c.5: IO window: disabled pci 0000:00:1c.5: MEM window: 0xfe500000-0xfe5fffff pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0xfe400000-0xfe4fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 0b index 0 mmio: [0, 0] bus: 0b index 1 mmio: [0, 0] bus: 0b index 2 mmio: [0, 0] bus: 0b index 3 mmio: [0, 0] bus: 0c index 0 mmio: [0, 0] bus: 0c index 1 mmio: [fe800000, fe8fffff] bus: 0c index 2 mmio: [0, 0] bus: 0c index 3 mmio: [0, 0] bus: 0d index 0 io port: [d000, dfff] bus: 0d index 1 mmio: [fe600000, fe7fffff] bus: 0d index 2 mmio: [f0000000, f01fffff] bus: 0d index 3 mmio: [0, 0] bus: 09 index 0 mmio: [0, 0] bus: 09 index 1 mmio: [fe500000, fe5fffff] bus: 09 index 2 mmio: [0, 0] bus: 09 index 3 mmio: [0, 0] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [fe400000, fe4fffff] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 io port: [0, ffff] bus: 03 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs...<7>Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 it is Freeing initrd memory: 3120k freed Simple Boot Flag at 0x79 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1254822707.974:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1746 SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: found MSI capability pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie02: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: found MSI capability pci_express 0000:00:1c.3:pcie00: allocate port service pci_express 0000:00:1c.3:pcie02: allocate port service pci_express 0000:00:1c.3:pcie03: allocate port service pcieport-driver 0000:00:1c.5: setting latency timer to 64 pcieport-driver 0000:00:1c.5: found MSI capability pci_express 0000:00:1c.5:pcie00: allocate port service pci_express 0000:00:1c.5:pcie02: allocate port service pci_express 0000:00:1c.5:pcie03: allocate port service pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: can't get bus number, assuming 0 ACPI: AC Adapter [AC] (off-line) ACPI: Battery Slot [BAT0] (battery present) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/ input0 ACPI: Lid Switch [LID] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/ input/input1 ACPI: Power Button (CM) [PBTN] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/ input/input2 ACPI: Sleep Button (CM) [SBTN] ACPI: SSDT 7F66E576, 0202 (r1 PmRef Cpu0Ist 3000 INTL 20050624) ACPI: SSDT 7F66DF0C, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7F66E778, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) ACPI: SSDT 7F66E4F1, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (29 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 Serial: 8250/16550 driver4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/ input3 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2...@0xfe9fb800 port 0xfe9fb900 irq 17 ata2: DUMMY ata3: SATA max UDMA/133 abar m2...@0xfe9fb800 port 0xfe9fba00 irq 17 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD2500BEVT-75ZCT2, 11.01A11, max UDMA/133 ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata3: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-7 11.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D400, max UDMA/33 ata4.00: configured for UDMA/33 ata5: port disabled. ignoring. scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H D400 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sr 3:0:0:0: Attached scsi generic sg1 type 5 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.30-170.2.82.fc10.i686 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.30-170.2.82.fc10.i686 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27.30-170.2.82.fc10.i686 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-6: new high speed USB device using ehci_hcd and address 2 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27.30-170.2.82.fc10.i686 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 2-6: configuration #1 chosen from 1 choice usb 2-6: New USB device found, idVendor=05a9, idProduct=2640 usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-6: Product: Laptop Integrated Webcam usb 2-6: Manufacturer: OmniVision Technologies, Inc. -2640-08.05.12.1 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27.30-170.2.82.fc10.i686 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.27.30-170.2.82.fc10.i686 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.27.30-170.2.82.fc10.i686 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/ input/input4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm- [email protected] cpuidle: using governor ladder cpuidle: using governor menu Marking TSC unstable due to TSC halts in idle usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 13:765:878 Freeing unused kernel memory: 416k freed Write protecting the kernel text: 2752k Write protecting the kernel read-only data: 1176k Clocksource tsc unstable (delta = -73199230 ns) input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input5 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/ input/input6 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1254822711.504:2): selinux=0 auid=4294967295 ses=4294967295 udevd version 127 started input: PC Speaker as /devices/platform/pcspkr/input/input7 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) ACPI: WMI: Mapper loaded i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 iTCO_vendor_support: vendor-support=0 acpi device:32: registered as cooling_device2 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device: 2e/device:2f/input/input8 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) acpi device:37: registered as cooling_device3 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device: 34/input/input9 ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device: 39/input/input10 ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) ieee80211_crypt: registered algorithm 'NULL' Linux video capture interface: v2.00 ricoh-mmc: Ricoh MMC Controller disabling driver ricoh-mmc: Copyright(c) Philip Langdale ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 12) ricoh-mmc: Controller is now disabled. sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22) sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1d.7/ usb2/2-6/2-6:1.0/input/input11 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) tg3.c:v3.94 (August 14, 2008) tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 tg3 0000:09:00.0: setting latency timer to 64 eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:22:19:d1:bd:b2 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0] eth0: dma_rwctrl[76180000] dma_mask[64-bit] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/ serio0). atkbd.c: Use 'setkeycodes e006 <keycode>' to make it known. wl: module license 'MIXED/Proprietary' taints kernel. firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI version 1.10 wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 wl 0000:0c:00.0: setting latency timer to 64 ieee80211_crypt: registered algorithm 'TKIP' eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.91.9 atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/ serio0). atkbd.c: Use 'setkeycodes e006 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/ serio0). atkbd.c: Use 'setkeycodes e006 <keycode>' to make it known. HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:1b.0: setting latency timer to 64 ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=1 (0xd/ 0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=2 (0xa/0xf/ 0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0xc, fmic=0xe, line=0x0, fline=0x0, cd=0x0, aux=0x0 ALSA sound/pci/hda/patch_sigmatel.c:2418: dac_nids=3 (0x2/0x5/0x3/0x0/0x0) firewire_core: created device fw0: GUID 444fc00027867838, S400 atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/ serio0). atkbd.c: Use 'setkeycodes e006 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/ serio0). atkbd.c: Use 'setkeycodes e006 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/ serio0). atkbd.c: Use 'setkeycodes e006 <keycode>' to make it known. device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda3, internal journal NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20080730 on minor 0 eth1: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 fuse init (API version 7.9) CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 Not cloning cgroup for unused subsystem ns usb 3-2: new full speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice hub 3-2:1.0: USB hub found hub 3-2:1.0: 3 ports detected usb 3-2: New USB device found, idVendor=0a5c, idProduct=4500 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: BCM2045B2 usb 3-2: Manufacturer: Broadcom usb 3-2.1: new full speed USB device using uhci_hcd and address 3 usb 3-2.1: configuration #1 chosen from 1 choice usb 3-2.1: New USB device found, idVendor=413c, idProduct=8126 usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2.1: Product: BCM2045 usb 3-2.1: Manufacturer: Broadcom Corp usb 3-2.2: new full speed USB device using uhci_hcd and address 4 usb 3-2.2: configuration #1 chosen from 1 choice Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/ usb3/3-2/3-2.2/3-2.2:1.0/input/input12 input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2 usb 3-2.2: New USB device found, idVendor=0a5c, idProduct=4502 usb 3-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0 usb 3-2.2: Manufacturer: Broadcom Corp Bluetooth: Generic Bluetooth USB driver ver 0.3 usb 3-2.3: new full speed USB device using uhci_hcd and address 5 usb 3-2.3: configuration #1 chosen from 1 choice input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/ usb3/3-2/3-2.3/3-2.3:1.0/input/input13 input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a. 0-2.3 usb 3-2.3: New USB device found, idVendor=0a5c, idProduct=4503 usb 3-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0 usb 3-2.3: Manufacturer: Broadcom Corp usbcore: registered new interface driver btusb Not cloning cgroup for unused subsystem ns CE: hpet increasing min_delta_ns to 15000 nsec CE: hpet increasing min_delta_ns to 22500 nsec CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 Adding 4096532k swap on /dev/sda5. Priority:-1 extents:1 across: 4096532k hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. warning: `proftpd' uses 32-bit capabilities (legacy support in use) CE: hpet increasing min_delta_ns to 33750 nsec CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 ---------------
On Oct 6, 12:39 pm, Craig Schlenter <[email protected]> wrote: > Hi > > I'm not seeing anything really revealing here ... maybe you are > running out of ram while linking? > > dmesg may tell you if the "out-of-memory" kernel facility killed the ld > process. > > Also try investigating how to get the scons build to only run one job > at a time (for the make build it's -j 1 but I haven't touched scons > for ages). That will > (a) use less RAM and > (b) all the output messages will be useful rather than interleaved > with other irrelevant stuff. > > --Craig > > 2009/10/6 Ujjwol (उज्जवल लामिछाने) <[email protected]>: > > > > > > > Ok the new build log with stderr logged > > > ------------------- > > [?1034hscons: Reading SConscript files ... > > scons: done reading SConscript files. > > scons: Building targets ... > > Extracting last change to /home/Ujjwol/chromium/home/chrome-svn/ > > tarball/chromium/src/sconsbuild/Debug/obj/_global_intermediate/build/ > > LASTCHANGE > > Compiling /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > > sconsbuild/Debug/obj/test_shell/npapi_test_plugin/__/__/glue/plugins/ > > test/npapi_constants.os > > Compiling /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > > sconsbuild/Debug/obj/test_shell/npapi_test_plugin/__/__/glue/plugins/ > > test/npapi_test.os > > Linking /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > > sconsbuild/Debug/page_cycler_tests > > Linking /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > > sconsbuild/Debug/chrome > > Compiling /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > > sconsbuild/Debug/obj/test_shell/npapi_test_plugin/__/__/glue/plugins/ > > test/plugin_arguments_test.os > > Compiling /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > > sconsbuild/Debug/obj/test_shell/npapi_test_plugin/__/__/glue/plugins/ > > test/plugin_client.os > > Compiling /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > > sconsbuild/Debug/obj/test_shell/npapi_test_plugin/__/__/glue/plugins/ > > test/plugin_delete_plugin_in_stream_test.os > > Compiling /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > > sconsbuild/Debug/obj/test_shell/npapi_test_plugin/__/__/glue/plugins/ > > test/plugin_get_javascript_url_test.os > > Compiling /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > > sconsbuild/Debug/obj/test_shell/npapi_test_plugin/__/__/glue/plugins/ > > test/plugin_geturl_test.os > > Compiling /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > > sconsbuild/Debug/obj/test_shell/npapi_test_plugin/__/__/glue/plugins/ > > test/plugin_javascript_open_popup.os > > Compiling /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > > sconsbuild/Debug/obj/test_shell/npapi_test_plugin/__/__/glue/plugins/ > > test/plugin_new_fails_test.os > > Compiling /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > > sconsbuild/Debug/obj/test_shell/npapi_test_plugin/__/__/glue/plugins/ > > test/plugin_npobject_proxy_test.os > > Compiling /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > > sconsbuild/Debug/obj/test_shell/npapi_test_plugin/__/__/glue/plugins/ > > test/plugin_private_test.os > > Compiling /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > > sconsbuild/Debug/obj/test_shell/npapi_test_plugin/__/__/glue/plugins/ > > test/plugin_test.os > > Building loadable module /home/Ujjwol/chromium/home/chrome-svn/tarball/ > > chromium/src/sconsbuild/Debug/libnpapi_test_plugin.so > > collect2: ld returned 1 exit status > > scons: *** [/home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > > sconsbuild/Debug/page_cycler_tests] Error 1 > > collect2: ld returned 1 exit status > > scons: *** [/home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > > sconsbuild/Debug/chrome] Error 1 > > scons: building terminated because of errors. > > --------------------- > > > On Oct 6, 12:17 pm, Lei Zhang <[email protected]> wrote: > >> It looks as though you didn't save stderr, only stdout, so the logs do > >> not contain any actual error messages. > > >> 2009/10/5 Ujjwol (उज्जवल लामिछाने) <[email protected]>: > > >> > While building chromium in Fedora 10, a strange build error has been > >> > encountered. > > >> > The tail of the log of build(hammer --verbose) process is: > > >> > ------------------------------------ > >> > [ujj...@ujjwol Desktop]$ tail VerboseChromeBuild.txt > >> > Copying /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > >> > sconsbuild/Debug/obj/chrome/_chrome_intermediate/repack/zh-CN.pak to / > >> > home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/sconsbuild/ > >> > Debug/locales/zh-CN.pak ... > >> > Copying /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > >> > sconsbuild/Debug/obj/chrome/_chrome_intermediate/repack/zh-TW.pak to / > >> > home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/sconsbuild/ > >> > Debug/locales/zh-TW.pak ... > >> > Copying /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > >> > sconsbuild/Debug/obj/chrome/_chrome_intermediate/repack/default.pak > >> > to /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > >> > sconsbuild/Debug/themes/default.pak ... > >> > g++ -o /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > >> > sconsbuild/Debug/obj/chrome/page_cycler_tests/test/page_cycler/ > >> > page_cycler_test.o -c -fno-rtti -fno-threadsafe-statics -Werror - > >> > pthread -fno-exceptions -Wall -D_FILE_OFFSET_BITS=64 -m32 -march=geode > >> > -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/ > >> > include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/ > >> > include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 - > >> > I/usr/include/freetype2 -I/usr/include/libpng12 -O0 -g - > >> > D__STDC_FORMAT_MACROS -DCHROMIUM_BUILD -DUNIT_TEST -DGTEST_HAS_RTTI=0 - > >> > D_DEBUG -I/home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > >> > sconsbuild/Debug/obj/_global_intermediate/chrome -I/home/Ujjwol/ > >> > chromium/home/chrome-svn/tarball/chromium/src -I/home/Ujjwol/chromium/ > >> > home/chrome-svn/tarball/chromium/src/skia/config -I/home/Ujjwol/ > >> > chromium/home/chrome-svn/tarball/chromium/src/third_party/skia/include/ > >> > core -I/home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > >> > third_party/skia/include/effects -I/home/Ujjwol/chromium/home/chrome- > >> > svn/tarball/chromium/src/skia/ext -I/home/Ujjwol/chromium/home/chrome- > >> > svn/tarball/chromium/src/third_party/harfbuzz/src -I/home/Ujjwol/ > >> > chromium/home/chrome-svn/tarball/chromium/src/third_party/harfbuzz/ > >> > contrib -I/home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > >> > testing/gtest/include /home/Ujjwol/chromium/home/chrome-svn/tarball/ > >> > chromium/src/chrome/test/page_cycler/page_cycler_test.cc > >> > g++ -o /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > >> > sconsbuild/Debug/obj/test_shell/npapi_layout_test_plugin/__/ > >> > npapi_layout_test_plugin/PluginObject.os -c -fno-rtti -fno-threadsafe- > >> > statics -Werror -pthread -fno-exceptions -Wall -D_FILE_OFFSET_BITS=64 - > >> > m32 -march=geode -O0 -g -fPIC -D__STDC_FORMAT_MACROS -DCHROMIUM_BUILD - > >> > DENABLE_CHANNEL_MESSAGING=1 -DENABLE_DATABASE=1 -DENABLE_DATAGRID=0 - > >> > DENABLE_OFFLINE_WEB_APPLICATIONS=1 -DENABLE_DASHBOARD_SUPPORT=0 - > >> > DENABLE_DOM_STORAGE=1 -DENABLE_JAVASCRIPT_DEBUGGER=0 - > >> > DENABLE_JSC_MULTIPLE_THREADS=0 -DENABLE_ICONDATABASE=0 - > >> > DENABLE_NOTIFICATIONS=0 -DENABLE_XSLT=1 -DENABLE_XPATH=1 - > >> > DENABLE_SHARED_WORKERS=0 -DENABLE_SVG=1 -DENABLE_SVG_ANIMATION=1 - > >> > DENABLE_SVG_AS_IMAGE=1 -DENABLE_SVG_USE=1 - > >> > DENABLE_SVG_FOREIGN_OBJECT=1 -DENABLE_SVG_FONTS=1 -DENABLE_VIDEO=1 - > >> > DENABLE_WORKERS=1 -DBUILDING_CHROMIUM__=1 -DUSE_SYSTEM_MALLOC=1 - > >> > DWTF_USE_PTHREADS=1 -DU_STATIC_IMPLEMENTATION -D_DEBUG -I/home/Ujjwol/ > >> > chromium/home/chrome-svn/tarball/chromium/src/third_party/icu/public/ > >> > common -I/home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > >> > third_party/icu/public/i18n -I/home/Ujjwol/chromium/home/chrome-svn/ > >> > tarball/chromium/src -I/home/Ujjwol/chromium/home/chrome-svn/tarball/ > >> > chromium/src/third_party/npapi -I/home/Ujjwol/chromium/home/chrome-svn/ > >> > tarball/chromium/src/third_party/npapi/bindings -I/home/Ujjwol/ > >> > chromium/home/chrome-svn/tarball/chromium/src/third_party/WebKit/ > >> > JavaScriptCore -I/home/Ujjwol/chromium/home/chrome-svn/tarball/ > >> > chromium/src/third_party/WebKit/JavaScriptCore/wtf /home/Ujjwol/ > >> > chromium/home/chrome-svn/tarball/chromium/src/webkit/tools/ > >> > npapi_layout_test_plugin/PluginObject.cpp > >> > g++ -o /home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > >> > sconsbuild/Debug/obj/test_shell/npapi_layout_test_plugin/__/ > >> > npapi_layout_test_plugin/TestObject.os -c -fno-rtti -fno-threadsafe- > >> > statics -Werror -pthread -fno-exceptions -Wall -D_FILE_OFFSET_BITS=64 - > >> > m32 -march=geode -O0 -g -fPIC -D__STDC_FORMAT_MACROS -DCHROMIUM_BUILD - > >> > DENABLE_CHANNEL_MESSAGING=1 -DENABLE_DATABASE=1 -DENABLE_DATAGRID=0 - > >> > DENABLE_OFFLINE_WEB_APPLICATIONS=1 -DENABLE_DASHBOARD_SUPPORT=0 - > >> > DENABLE_DOM_STORAGE=1 -DENABLE_JAVASCRIPT_DEBUGGER=0 - > >> > DENABLE_JSC_MULTIPLE_THREADS=0 -DENABLE_ICONDATABASE=0 - > >> > DENABLE_NOTIFICATIONS=0 -DENABLE_XSLT=1 -DENABLE_XPATH=1 - > >> > DENABLE_SHARED_WORKERS=0 -DENABLE_SVG=1 -DENABLE_SVG_ANIMATION=1 - > >> > DENABLE_SVG_AS_IMAGE=1 -DENABLE_SVG_USE=1 - > >> > DENABLE_SVG_FOREIGN_OBJECT=1 -DENABLE_SVG_FONTS=1 -DENABLE_VIDEO=1 - > >> > DENABLE_WORKERS=1 -DBUILDING_CHROMIUM__=1 -DUSE_SYSTEM_MALLOC=1 - > >> > DWTF_USE_PTHREADS=1 -DU_STATIC_IMPLEMENTATION -D_DEBUG -I/home/Ujjwol/ > >> > chromium/home/chrome-svn/tarball/chromium/src/third_party/icu/public/ > >> > common -I/home/Ujjwol/chromium/home/chrome-svn/tarball/chromium/src/ > >> > third_party/icu/public/i18n -I/home/Ujjwol/chromium/home/chrome-svn/ > >> > tarball/chromium/src -I/home/Ujjwol/chromium/home/chrome-svn/tarball/ > >> > chromium/src/third_party/npapi > > ... > > read more » --~--~---------~--~----~------------~-------~--~----~ Chromium Developers mailing list: [email protected] View archives, change email options, or unsubscribe: http://groups.google.com/group/chromium-dev -~----------~----~----~----~------~----~------~--~---
