Yes, all ports on the monitoring system are identical. The i354 is a 4 port 
chip, and all the ethernet ports on the monitoring unit are connected through 
that same chip.

The general server has both I354 and I211 chips. I shut everything down on the 
server to conduct a test. It didn’t matter which the direct connect vs switch 
was in use.


> On Nov 16, 2016, at 01:53, Miroslav Lichvar <> wrote:
> Is the port to the switch identical to the one connected to the third
> server? It would be interesting to see if the offset changes when the
> ports are swapped.

Reply via email to